Supported devices

ESP Boards

The app has been developed and tested for NodeMCU V3 and NodeMCU ESP32 boards but it should work with all boards. The board below have their pin-layout listed in the GPIO pairing wizards and block potentially problematic pins from being used. Additionally, two 'All ports' dummy boards can be selected to simply allow all ports to be selected.

• NodeMCU V3
• Wemos D1 Mini
• NodeMCU ESP32
• Lolin32 OLED
• ESP32 (All ports)
• ESP8266 (All ports)

you can select the board from a unit settings page. If you run into any problems with other boards or want to have the pin-layout displayed in the GPIO pairing wizard, let me know in a feature request!

Sensors and actuators

GPIO output devices

• Boolean
• Pulse
• PWM
• RTTTL
• Tone

Extension boards

• MCP23017 (16x extra GPIO input/output pins)

You can enable extension boards in the unit setting page.

Sensor devices

• Analog Input

  • P002 Analog input - internal
  • P007 Analog input - PCF8591
  • P025 Analog input - ADS1115
  • P033 Generic - Dummy Device
  • P060 Analog input - MCP3221

• Distance sensors (lidar/ultrasonic)

  • P013 Position - HC-SR04, RCW-0001, etc.
  • P110 Distance - VL53L0X (200cm)
  • P133 Distance - VL53L1X (400cm)

• Dust sensors

  • P018 Dust - Sharp GP2Y10
  • P053 Dust - PMSx003 / PMSx003ST
  • P056 Dust - SDS011/018/198

• Energy AC/DC

  • P027 Energy (DC) - INA219
  • P076 Energy (AC) - HLW8012/BL0937
  • P077 Energy (AC) - CSE7766 (POW r2)
  • P078 Energy (AC) - Eastron SDM120C/220T/230/630
  • P085 Energy - AccuEnergy AcuDC24x

• Environment (Temperature, pressure, humidity)

  • P004 Environment - DS18b20
  • P005 Environment - DHT11/12/22 SONOFF2301/7021
  • P006 Environment - BMP085/180
  • P014 Environment - SI7021/HTU21D
  • P016 Environment - BME680
  • P024 Environment - MLX90614
  • P028 Environment - BMx280
  • P031 Environment - SHT1X
  • P032 Environment - MS5611 (GY-63)
  • P034 Environment - DHT12 (I2C)
  • P039 Environment - Thermocouple
  • P033 Generic - Dummy Device

• Gasses

  • P049 Gasses - CO2 MH-Z19
  • P052 Gasses - CO2 Senseair
  • P083 Gasses - SGP30
  • P090 Gasses - CCS811 TVOC/eCO2

• Light strength sensors

  • P010 Light/Lux - BH1750
  • P015 Light/Lux - TSL2561
  • P074 Light/Lux - TSL2591

• P1 Energy Meter (Dutch energy meters, read: http://www.esp8266thingies.nl/)

  • P044 Communication - P1 Wifi Gateway

• Pulse Counter

  • P003 Generic - Pulse counter

• Switch Input (Only in "Switch" mode, type "Normal switch" with double click and long press events)

  • P001 Switch input - Switch
  • P009 Switch input - MCP23017
  • P019 Switch input - PCF8574
  • P033 Generic - Dummy Device (Possible values -1, 0 and 1. See the Wiki for more information)

As my own use cases are limited, I need your input for Supporting more boards, devices and languages. Read here how you can help me!