Added ENV support

defaults/main.yml

@@ -38,6 +38,7 @@ traefik_ports:
   - '80:80'
   - '443:443'
 traefik_labels: {}
+traefik_env:
 
 # traefik_confkey_global: {}
 # traefik_confkey_serversTransport: {}

tasks/1_setup.yml

@@ -39,6 +39,7 @@
     published_ports: '{{ traefik_ports }}'
     volumes: '{{ traefik_volumes + traefik_add_volumes }}'
     labels: '{{ traefik_labels }}'
+    env: '{{ traefik_env }}'
     command:
       - '--configFile=/etc/traefik/traefik.yml'
     networks:

templates/kibana.yml.j2

@@ -0,0 +1,124 @@
+# Kibana is served by a back end server. This setting specifies the port to use.
+server.port: "{{ kibana_server_port }}"
+
+# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
+# The default is 'localhost', which usually means remote machines will not be able to connect.
+# To allow connections from remote users, set this parameter to a non-loopback address.
+server.host: "{{ kibana_server_host }}"
+
+# Enables you to specify a path to mount Kibana at if you are running behind a proxy.
+# Use the `server.rewriteBasePath` setting to tell Kibana if it should remove the basePath
+# from requests it receives, and to prevent a deprecation warning at startup.
+# This setting cannot end in a slash.
+{% if kibana_server_basepath != None %}
+server.basePath: "{{ kibana_server_basepath }}"
+{% endif %}
+
+server.publicBaseUrl: "{{ kibana_server_baseurl }}"
+
+# Specifies whether Kibana should rewrite requests that are prefixed with
+# `server.basePath` or require that they are rewritten by your reverse proxy.
+# This setting was effectively always `false` before Kibana 6.3 and will
+# default to `true` starting in Kibana 7.0.
+#server.rewriteBasePath: false
+
+# The maximum payload size in bytes for incoming server requests.
+#server.maxPayloadBytes: 1048576
+
+# The Kibana server's name.  This is used for display purposes.
+server.name: "{{ kibana_server_name }}"
+
+# The URLs of the Elasticsearch instances to use for all your queries.
+elasticsearch.hosts: [{{ kibana_elasticsearch_hosts }}]
+
+# When this setting's value is true Kibana uses the hostname specified in the server.host
+# setting. When the value of this setting is false, Kibana uses the hostname of the host
+# that connects to this Kibana instance.
+#elasticsearch.preserveHost: true
+
+# Kibana uses an index in Elasticsearch to store saved searches, visualizations and
+# dashboards. Kibana creates a new index if the index doesn't already exist.
+kibana.index: "{{ kibana_index }}"
+
+# If your Elasticsearch is protected with basic authentication, these settings provide
+# the username and password that the Kibana server uses to perform maintenance on the Kibana
+# index at startup. Your Kibana users still need to authenticate with Elasticsearch, which
+# is proxied through the Kibana server.
+{% if elasticsearch_password != None %}
+elasticsearch.username: "{{ kibana_username }}"
+elasticsearch.password: "{{ kibana_password }}"
+{% endif %}
+
+# Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
+# These settings enable SSL for outgoing requests from the Kibana server to the browser.
+#server.ssl.enabled: false
+#server.ssl.certificate: /path/to/your/server.crt
+#server.ssl.key: /path/to/your/server.key
+
+# Optional settings that provide the paths to the PEM-format SSL certificate and key files.
+# These files are used to verify the identity of Kibana to Elasticsearch and are required when
+# xpack.security.http.ssl.client_authentication in Elasticsearch is set to required.
+#elasticsearch.ssl.certificate: /path/to/your/client.crt
+#elasticsearch.ssl.key: /path/to/your/client.key
+
+# Optional setting that enables you to specify a path to the PEM file for the certificate
+# authority for your Elasticsearch instance.
+# elasticsearch.ssl.certificateAuthorities: [ "/path/to/your/CA.pem" ]
+
+# To disregard the validity of SSL certificates, change this setting's value to 'none'.
+elasticsearch.ssl.verificationMode: none
+
+# Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of
+# the elasticsearch.requestTimeout setting.
+#elasticsearch.pingTimeout: 1500
+
+# Time in milliseconds to wait for responses from the back end or Elasticsearch. This value
+# must be a positive integer.
+elasticsearch.requestTimeout: 90000
+
+# List of Kibana client-side headers to send to Elasticsearch. To send *no* client-side
+# headers, set this value to [] (an empty list).
+#elasticsearch.requestHeadersWhitelist: [ authorization ]
+
+# Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten
+# by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration.
+#elasticsearch.customHeaders: {}
+
+# Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.
+#elasticsearch.shardTimeout: 30000
+
+# Time in milliseconds to wait for Elasticsearch at Kibana startup before retrying.
+#elasticsearch.startupTimeout: 5000
+
+# Logs queries sent to Elasticsearch. Requires logging.verbose set to true.
+#elasticsearch.logQueries: false
+
+# Specifies the path where Kibana creates the process ID file.
+#pid.file: /var/run/kibana.pid
+
+# Enables you specify a file where Kibana stores log output.
+#logging.dest: stdout
+
+# Set the value of this setting to true to suppress all logging output.
+#logging.silent: false
+
+# Set the value of this setting to true to suppress all logging output other than error messages.
+#logging.quiet: false
+
+# Set the value of this setting to true to log all events, including system usage information
+# and all requests.
+#logging.verbose: false
+
+# Set the interval in milliseconds to sample system and process performance
+# metrics. Minimum is 100ms. Defaults to 5000.
+#ops.interval: 5000
+
+# Specifies locale to be used for all localizable strings, dates and number formats.
+# Supported languages are the following: English - en , by default , Chinese - zh-CN .
+#i18n.locale: "en"
+{% if kibana_xpack_encryptionkey != None %}
+xpack.security.enabled: true
+xpack.reporting.encryptionKey: "{{ kibana_xpack_encryptionkey }}"
+xpack.security.encryptionKey: "{{ kibana_xpack_encryptionkey }}"
+xpack.encryptedSavedObjects.encryptionKey: "{{ kibana_xpack_encryptionkey }}"
+{% endif %}