server supermicro superserver x10drt pibf

SuperMicro X10DRT-PIBF dual-socket Intel Xeon server

Hardware Overview

• One SuperMicro TwinPro2 chassis can hold up to 4 x SuperServer X10DRT-PIBF node
• X10DRT-PIBF supports up to 2 x Intel Xeon E5-2600v3 series CPUs
• 16 DDR4 DIMM slots
• 3 x PCIe slots (2 x PCIe x16 + 1 x PCIe x8)
• 1 x dedicated IPMI gigabit Ethernet port

Profile 'Cluster Basic'

---

BIOS configuration

1. Power on and press Del to enter BIOS, note the firmware revisions during boot
2. Enter first pass BIOS and configure the following:

Save & Exit -> Restore optimised defaults

Advanced -> Boot Feature -> Quiet boot -> Disabled

Advanced -> Boot Feature -> Wait for F1 if error -> Disabled

Advanced -> Boot Feature -> Restore on AC power loss -> Stay off

Advanced -> CPU Configuration -> Hyperthreading (All) -> Disabled

Advanced -> CPU Configuration -> Advanced Power Management Configuration -> Energy performance bias setting -> Performance

Advanced -> Serial Port Console Redirection -> SOL/COMZ Console Redirection Settings -> Redirection after BIOS boot -> Bootloader

Advanced -> Boot -> Boot mode select -> Legacy

Advanced -> Boot -> Change boot order -> Network then hard disk (all others disabled)

Save & Exit

Save changes & reset