Aliases used by other developers include Moonrat, Rice MiniCubator, and Rice Petri FI. Visit the Legacy folder for the work of volunteers prior to December 2022 and the hand built prototype.
MoonratII development effort began in 2023.
TBA
A scientific research paper is tentatively scheduled for March 2025 in the HardwareX journal.
Prototypes of the MoonratII were field tested in two locations - the Galapagos Islands by researcher Auja Bywater and in Tanzania by Dr. Robert Read. The heater features the TMP36 low voltage temperature sensor. A HardwareX scientific research paper is slated for October 2024 publication.
The MoonRatII team has produced five Printed Circuit Assemblies (Control and Heater) of the Rev 1 PWB for use by the USA team and five Printed Circuit Assemblies (Control and Heater) of the Rev 2 PWB for use by the Mexico team. Enclosure design for the Controller Assembly of Rev 3 PWB is underway TBA.
In one schematic and PCB, we have developed a "Control Assembly" and a "Heater Assembly".
- The Control Assembly will be in an enclosure detachable from the incubation chamber.
- The Heater Assembly will mounted internal to the incubation assembly under the unit top. Current to a heating pad or pads has changed from the previously used TMP36 low voltage temperature sensor to a digital temperature sensor.
- A rechargable battery with its recharging station will complete a MoonRatII incubator system.
| A | B | C |
|---|---|---|
 |
 |
 |
 |
 |
 |
 |
 |
 |
The connections from the controller to the heater needs only 6 wires:
- GND (ground, nominally voltage 0).
- +12V PWR (the heating elements requires approximately 12V power).
- HEAT ON (Vin).
- +5V (for the thermometer).
- SIG - data from the digital "one-wire" format.
- UNK - a final wire is included for future functionality that is unknown right now. It is connected as a redundant ground in Rev 1 and Rev 2.
These (esp. the power) should probably be rated for 2 amps, but in practice 1 amp is probably good enough.
From the 2020 design.
Basic Structure of Portable Incubator (1)
By building a small, portable, intelligent incubator that can maintain constant elevated temperature, a variety of biological experiments and assays can be performed "in the field" without having access to a electric grid power.
This is an offshoot of the Rapid E. coli project. It is an attempt to build a better, smaller, more intelligent portable incubator that the Armadillo, described elsewhere and buildable from an instructable.
- Petrifilms https://www.3m.com/3M/en_US/company-us/all-3m-products/~/ECOLICT-3M-Petrifilm-E-coli-Coliform-Count-Plates/?N=5002385+3293785155&rt=rud
- EPA Guidelines https://19january2017snapshot.epa.gov/sites/production/files/2015-11/documents/drinking_water_sample_collection.pdf
- Original Incubator Paper http://jhe.ewb.org.au/index.php/jhe/article/view/127
- Construction of a Low-cost Mobile Incubator for Field and Laboratory Use https://www.jove.com/t/58443/construction-low-cost-mobile-incubator-for-field-laboratory
- Solar Powered Portable Culture Incubator https://www.jscimedcentral.com/Pediatrics/pediatrics-3-1063.pdf
- World Health Organization
- Fuzzy Logic -
Thanks to Dr. Sabia Abidi of Rice University for input and references.
Robert L. Read - Founder of Public Invention