AIO other pieces

So you've ordered your AIO board but want to fully assemble it.

The main pieces will likely be:

• Teensy 4.1 a.k.a the brain of the board
• IMU for roll compensation
• GNSS / GPS - ZED-F9P
• Cytron MD13S driver

You'll likely also need:

• some standard 2.54mm header pins between the components and the board e.g.: aliexpress or botland
• A few (2-4 per board) jumpers e.g.: aliexpress or botland
• Teensy requires 2x3 header that's size 2mm: digikey or botland
• Between Teensy and the Board you need the 2x3 connector: digikey
• Ampseal 23 board connector: https://www.aliexpress.com/item/10000383252937.html
• Standard GPS module requires a 30cm extender as well: https://www.aliexpress.com/item/1005003193091912.html (No 13. 30cm at the time of writing but compare it to the picture.)

• A crimping tool: Yato YT-2255

Enclosure: 3D print / electrical box / Hammond enclosure. Designs are available in the repo.

And that should be good enough for the board itself.