Breakout board for ebyte e07-900m10s CC1101 module
Breakout board vs well-known (but usually not working) CC1101 module for size:
Connected to waveshare ESP32 s3 mini (ramses_esp clone)
- The header is a standard .1" (2.54mm) PCB header.
- C1 and C2 are 1206 SMD size
- C1 = 100nF
- C2 = 10uF
- C2 is probably not needed, it is used as a buffer for large currents while sending.
- Antenna connector is PCB SMA female (use standard 1.6mm board thickness)
- The IPEX stamp antenna on the module should also be useable (not tested)
This is my first KiCad/PCB. I'm happy it works!
This repo contains the KiCad 8 files as well as the gerbers to produce the PCB. I used JLCPCB for my board. Just upload the zip-file in the gerber folder to JLCPCB.