📝 Fix comment missing ')' (MarlinFirmware#27325)

docs/ConfigEmbedding.md

@@ -3,7 +3,7 @@
 Starting with version 2.0.9.3, Marlin can automatically extract the configuration used to generate the firmware and store it in the firmware binary. This is enabled by defining `CONFIGURATION_EMBEDDING` in `Configuration_adv.h`.
 
 ## How it's done
-At the start of the PlatformIO build process, we create an embedded configuration by extracting all active options from the Configuration files and writing them out as JSON to `marlin_config.json`, which also includes specific build information (like the git revision, the build date, and some version information. The JSON file is then compressed in a ZIP archive called `.pio/build/mc.zip` which is converted into a C array and stored in a C++ file called `mc.h` which is included in the build.
+At the start of the PlatformIO build process, we create an embedded configuration by extracting all active options from the Configuration files and writing them out as JSON to `marlin_config.json`, which also includes specific build information (like the git revision, the build date, and some version information). The JSON file is then compressed in a ZIP archive called `.pio/build/mc.zip` which is converted into a C array and stored in a C++ file called `mc.h` which is included in the build.
 
 ## Extracting configurations from a Marlin binary
 To get the configuration out of a binary firmware, you'll need a non-write-protected SD card inserted into the printer while running the firmware.