Merge pull request #1015 from privacy-scaling-explorations/feat/updat…

…e-testing-docs

Feat/update testing docs

website/blog/2023-01-18-maci-v1.1.1.md

@@ -92,9 +92,9 @@ For further reading on coordinator services, please refer to this [doc](https://
 
 MACI can be used as a standalone application to carry out on-chain polls, or be implemented into new projects that can then benefit from its properties.
 
-For use as a standalone application, a `cli` package is provided which allows coordinators and voters to use MACI. Please refer to this [doc](https://maci.pse.dev/docs/cli.html) for details on how to use it.
+For use as a standalone application, a `cli` package is provided which allows coordinators and voters to use MACI. Please refer to this [doc](/docs/cli) for details on how to use it.
 
-To implement MACI into a project, the [documentation](https://maci.pse.dev/docs/introduction) can be used a reference, as well as reviewing how [clr.fund](https://github.com/clrfund) and [qf](https://github.com/privacy-scaling-explorations/qf) use MACI in their code.
+To implement MACI into a project, the [documentation](/docs/introduction) can be used a reference, as well as reviewing how [clr.fund](https://github.com/clrfund) and [qf](https://github.com/privacy-scaling-explorations/qf) use MACI in their code.
 
 ## MACI 0.x
 

website/versioned_docs/version-v1.x/circuits.md

@@ -431,7 +431,7 @@ circom --r1cs --sym --wasm --output ./build circom/test/processMessages_test.cir
 circom --r1cs --sym --wasm --output ./build circom/test/tallyVotes_test.circom
 ```
 
-Please note that the circuit is configured with testing purpose parameters, which means it can only handle a limited amount of messages (up to 25 messages). For more information on the parameters and how to configure them, refer to [this page](https://maci.pse.dev/docs/circuits.html#compile-circuits).
+Please note that the circuit is configured with testing purpose parameters, which means it can only handle a limited amount of messages (up to 25 messages). For more information on the parameters and how to configure them, refer to [this page](/docs/circuits/#compile-circuits).
 
 ### Generating zKeys
 
@@ -486,4 +486,4 @@ To run individual tests, you can use the following commands (for all other circu
 - `pnpm run test-processMessages` to run the tests for the `processMessages` circuit.
 - `pnpm run test-tallyVotes` to run the tests for the `tallyVotes` circuit.
 
-More details on testing are provided in the [testing section](https://maci.pse.dev/docs/testing) of the documentation.
+More details on testing are provided in the [testing section](/docs/testing) of the documentation.

website/versioned_docs/version-v1.x/installation.md

@@ -86,7 +86,7 @@ MACI has two main zk-SNARK circuits (plus an optional Subsidy circuit). Each cir
 
 Unless you wish to generate a fresh set of `.zkey` files, you should obtain
 them from someone who has performed a multi-party trusted setup for said
-circuits. For more details on which artifacts have undergone a trusted setup, please refer to the [Trusted Setup](https://maci.pse.dev/docs/trusted-setup) page.
+circuits. For more details on which artifacts have undergone a trusted setup, please refer to the [Trusted Setup](/docs/trusted-setup) page.
 
 Note the locations of the `.zkey` files as the CLI requires them as command-line flags.
 

website/versioned_docs/version-v1.x/testing-in-details.md → website/versioned_docs/version-v1.x/testing-in-detail.md

@@ -1,13 +1,13 @@
 ---
-title: MACI Testing in Details
-description: How MACI tests work in details
-sidebar_label: How Our Test Suites Work
+title: MACI Testing in Detail
+description: How MACI tests work in detail
+sidebar_label: Testing in detail
 sidebar_position: 10
 ---
 
-# Testing
+# Testing in detail
 
-This doc extends on the [Testing](https://maci.pse.dev/docs/testing.md) doc and explains how MACI tests work in details. This information should be used by MACI's maintainers as well as contributors.
+This doc expands on our [introduction to testing](/docs/testing) doc and explains how MACI tests work in greater detail. This information should be used by MACI's maintainers as well as contributors.
 
 ## Automated Tests
 
@@ -171,7 +171,7 @@ Within the circuits folder, there are a number of tests that are used to verify
 
 These tests often use mock data from the `core` package. For instance, when testing the `processMessages` circuit, we are required to generate the parameters from the `core` packing, using the `Poll:processMessages` function. The same applies to vote tallying, where we need the `Poll:tally` function to be run first with mock users and vote messages.
 
-All of the tests run using test parameters, usually `10, 2, 1, 2`, aside from the tests inside: [`ceremonyParam`](https://github.com/privacy-scaling-explorations/maci/blob/dev/circuits/ts/__tests__/CeremonyParams.test.ts) which use the parameters of the latest MACI ceremony. More details on the trusted setup can be found [here](https://maci.pse.dev/docs/trusted-setup).
+All of the tests run using test parameters, usually `10, 2, 1, 2`, aside from the tests inside: [`ceremonyParam`](https://github.com/privacy-scaling-explorations/maci/blob/dev/circuits/ts/__tests__/CeremonyParams.test.ts) which use the parameters of the latest MACI ceremony. More details on the trusted setup can be found [here](/docs/trusted-setup).
 
 ### Core
 

website/versioned_docs/version-v1.x/testing.md

@@ -1,11 +1,11 @@
 ---
 title: Testing MACI
-description: How to test MACI
+description: An introduction on how to test MACI
 sidebar_label: Testing
 sidebar_position: 9
 ---
 
-# Testing
+# Testing introduction
 
 ## Unit tests