Releases: panaaj/nmeasimulator
v1.6.1
Changes
Add: Follow routes as well as tracks in GPX files.
Update: Tune output stream written to serial port.
Installation:
Download and install / run the appropriate file for your OS from the Assets section below.
| OS | Package | Distribution |
|---|---|---|
| Windows | NMEAsimulator.1.6.1.exe | |
| Linux | nmeasimulator_1.6.1_amd64.deb nmeasimulator_1.6.1_amd64.rpm NMEASimulator-1.6.1.AppImage |
Debian RedHat Application Image |
| Unavailable | ||
| Unavailable |
Issues can be logged here
v1.6.0
Changes
Add: UDP Multicast support
Update: When following GPX track, use the <course> and <speed> attribute values if present in <trkpt>.
Update: Select the network interface to use with UDP broadcast.
Fix: Issue where under certain conditions the ViewSync output was not generated.
Installation:
Download and install / run the appropriate file for your OS from the Assets section below.
| OS | Package | Distribution |
|---|---|---|
| Windows | NMEAsimulator.1.6.0.exe | |
| Linux | nmeasimulator_1.6.0_amd64.deb nmeasimulator_1.6.0_amd64.rpm NMEASimulator-1.6.0.AppImage |
Debian RedHat Application Image |
| Unavailable | ||
| Unavailable |
Issues can be logged here
v1.5.0
Changes:
- Add: Support for 61162-450 prefixed NMEA sentences. (addresses #52)
- Add: Ability to set a destination point to support generation of APB and RMB sentences.
Installation:
Download and install / run the appropriate file for your OS from the Assets section below.
| OS | Package | Distribution |
|---|---|---|
| Windows | NMEAsimulator.1.5.0.exe | |
| Mac | NMEAsimulator-1.5.0.dmg | |
| Linux | nmeasimulator_1.5.0_amd64.deb nmeasimulator_1.5.0_amd64.rpm NMEASimulator-1.5.0.AppImage |
Debian RedHat Application Image |
| Raspberry Pi | NMEASimulator-1.5.0-armv7l.AppImage | Application Image |
Issues can be logged here
v1.4.2
Changes:
- Add: VBW sentence. (addresses #47)
- Add: Manually enter additional NMEA sentences which are appended to the generated sentences. (addresses #47)
Installation:
Download and install / run the appropriate file for your OS from the Assets section below.
| OS | Package | Distribution |
|---|---|---|
| Windows | NMEAsimulator.1.4.2.exe | |
| Mac | NMEAsimulator-1.4.2.dmg | |
| Linux | nmeasimulator_1.4.2_amd64.deb nmeasimulator_1.4.2_amd64.rpm NMEASimulator-1.4.2.AppImage |
Debian RedHat Application Image |
| Raspberry Pi | NMEASimulator-1.4.2-armv7l.AppImage | Application Image |
Issues can be logged here
v1.4.1
Changes:
- Remove: Legacy DBK and DBS sentences are no longer sent.
- Fix: Issue where UDP (broadcast) was not being seen on the network. (closes #44)
- Add: Assign Talker identifier to NMEA sentences. (closes #45)
Installation:
Download and install / run the appropriate file for your OS from the Assets section below.
| OS | Package | Distribution |
|---|---|---|
| Windows | NMEAsimulator.1.4.1.exe | |
| Mac | NMEAsimulator-1.4.1.dmg | |
| Linux | nmeasimulator_1.4.1_amd64.deb nmeasimulator_1.4.1_amd64.rpm NMEASimulator-1.4.1.AppImage |
Debian RedHat Application Image |
| Raspberry Pi | NMEASimulator-1.4.1-armv7l.AppImage | Application Image |
Issues can be logged here
v1.4.0
Changes:
- New: Send data stream using UDP.
- Update: When following a track file, the speed value that is output is calculated from track point timestamps if they are available. (closes #39)
- New: Added capability to set a baud rate other than those listed in the dropdown list. (closes #41)
Installation:
Download and install / run the appropriate file for your OS from the Assets section below.
| OS | Package | Distribution |
|---|---|---|
| Windows | NMEAsimulator.1.4.0.exe | |
| Mac | NMEAsimulator-1.4.0.dmg | |
| Linux | - nmeasimulator_1.4.0_amd64.deb - nmeasimulator_1.4.0_amd64.rpm - NMEASimulator-1.4.0.AppImage |
Debian RedHat Application Image |
| Raspberry Pi | NMEASimulator-1.4.0-armv7l.AppImage | Application Image |
Issues can be logged here
v1.3.2
- Fix: Issue where coordinates with values < 1 were incorrectly being transmitted as 0 in NMEA output stream.
Download and install / run the appropriate file for your OS from the Assets section below.
Issues can be logged here
Windows:
- NMEAsimulator.1.3.2.exe
Mac:
- NMEAsimulator-1.3.2.dmg
Linux:
- Debian install package: nmeasimulator_1.3.2_amd64.deb
- RedHat install package: nmeasimulator_1.3.2_amd64.rpm
- Universal Linux Application Image: NMEASimulator-1.3.2.AppImage
Raspberry Pi:
- Application Image: NMEASimulator-1.3.2-armv7l.AppImage
v1.3.1
- Fix: Issue where manual override on some controls was not setting the value correctly (addresses #35).
Download and install / run the appropriate file for your OS from the Assets section below.
Issues can be logged here
Windows:
- NMEAsimulator.1.3.1.exe
Mac:
- NMEAsimulator-1.3.1.dmg
Linux:
- Debian install package: nmeasimulator_1.3.1_amd64.deb
- RedHat install package: nmeasimulator_1.3.1_amd64.rpm
- Universal Linux Application Image: NMEASimulator-1.3.1.AppImage
Raspberry Pi:
- Application Image: NMEASimulator-1.3.1-armv7l.AppImage
v1.3.0
- New: Follow track in KML file. (addresses #33)
- New: Ability to set Altitude. (addresses #33)
- Fix: Use altitude associated with track point when following a track loaded from a GPX / KML file.
- Fix: Stop logfile info bar from scrolling off the page.
- Fix: Clicking on map sets vessel position to 0,0 (resolves #34).
- Fix: Resolved issue where NMEA sentences containing position data, the decimal places were incorrectly rounded to .00 (closes #32)
- Update: Position data decimal places has been increased to 6 (previously 2) increasing resolution but ensuring generated NMEA sentences remain under the max. length of 79 characters (82 including checksum).
Download and install / run the appropriate file for your OS from the Assets section below.
Issues can be logged here
Windows:
- NMEAsimulator.1.3.0.exe
Mac:
- NMEAsimulator-1.3.0.dmg
Linux:
- Debian install package: nmeasimulator_1.3.0_amd64.deb
- RedHat install package: nmeasimulator_1.3.0_amd64.rpm
- Universal Linux Application Image: NMEASimulator-1.3.0.AppImage
Raspberry Pi:
- Application Image: NMEASimulator-1.3.0-armv7l.AppImage
v1.2.3
- update: Speed value can be set in increments of 0.1 knots (addresses #31)
Download and install / run the appropriate file for your OS from the Assets section below.
Issues can be logged here
Windows:
- NMEAsimulator.1.2.3.exe
Mac:
- NMEAsimulator-1.2.3.dmg
Linux:
- Debian install package: nmeasimulator_1.2.3_amd64.deb
- RedHat install package: nmeasimulator_1.2.3_amd64.rpm
- Universal Linux Application Image: NMEASimulator-1.2.3.AppImage
Raspberry Pi:
- Application Image: NMEASimulator-1.2.3-armv7l.AppImage