[sfdo] Migrate sfdo over to Rust.

Test: build and run on device.
Bug: 329450914
Change-Id: I6a1cbba7eacc74d960f9eb854928bac1ad66d20a

cmds/sfdo/Android.bp

@@ -1,17 +1,10 @@
-cc_binary {
+rust_binary {
     name: "sfdo",
+    srcs: ["sfdo.rs"],
 
-    srcs: ["sfdo.cpp"],
-
-    shared_libs: [
-        "libutils",
-        "libgui",
-    ],
-
-    cflags: [
-        "-Wall",
-        "-Werror",
-        "-Wunused",
-        "-Wunreachable-code",
+    rustlibs: [
+        "android.gui-rust",
+        "libclap",
     ],
+    edition: "2021",
 }

cmds/sfdo/sfdo.rs

@@ -0,0 +1,155 @@
+// Copyright (C) 2024 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+//! sfdo: Make surface flinger do things
+use android_gui::{aidl::android::gui::ISurfaceComposer::ISurfaceComposer, binder};
+use clap::{Parser, Subcommand};
+use std::fmt::Debug;
+
+const SERVICE_IDENTIFIER: &str = "SurfaceFlingerAIDL";
+
+fn print_result<T, E>(function_name: &str, res: Result<T, E>)
+where
+    E: Debug,
+{
+    match res {
+        Ok(_) => println!("{}: Operation successful!", function_name),
+        Err(err) => println!("{}: Operation failed: {:?}", function_name, err),
+    }
+}
+
+fn parse_toggle(toggle_value: &str) -> Option<bool> {
+    let positive = ["1", "true", "y", "yes", "on", "enabled", "show"];
+    let negative = ["0", "false", "n", "no", "off", "disabled", "hide"];
+
+    let word = toggle_value.to_lowercase(); // Case-insensitive comparison
+
+    if positive.contains(&word.as_str()) {
+        Some(true)
+    } else if negative.contains(&word.as_str()) {
+        Some(false)
+    } else {
+        None
+    }
+}
+
+#[derive(Parser)]
+#[command(version = "0.1", about = "Execute SurfaceFlinger internal commands.")]
+#[command(propagate_version = true)]
+struct Cli {
+    #[command(subcommand)]
+    command: Option<Commands>,
+}
+
+#[derive(Subcommand, Debug)]
+enum Commands {
+    #[command(about = "[optional(--delay)] Perform a debug flash.")]
+    DebugFlash {
+        #[arg(short, long, default_value_t = 0)]
+        delay: i32,
+    },
+
+    #[command(
+        about = "state = [enabled | disabled] When enabled, it disables Hardware Overlays, \
+                      and routes all window composition to the GPU. This can help check if \
+                      there is a bug in HW Composer."
+    )]
+    ForceClientComposition { state: Option<String> },
+
+    #[command(about = "state = [hide | show], displays the framerate in the top left corner.")]
+    FrameRateIndicator { state: Option<String> },
+
+    #[command(about = "Force composite ahead of next VSYNC.")]
+    ScheduleComposite,
+
+    #[command(about = "Force commit ahead of next VSYNC.")]
+    ScheduleCommit,
+}
+
+/// sfdo command line tool
+///
+/// sfdo allows you to call different functions from the SurfaceComposer using
+/// the adb shell.
+fn main() {
+    binder::ProcessState::start_thread_pool();
+    let composer_service = match binder::get_interface::<dyn ISurfaceComposer>(SERVICE_IDENTIFIER) {
+        Ok(service) => service,
+        Err(err) => {
+            eprintln!("Unable to connect to ISurfaceComposer: {}", err);
+            return;
+        }
+    };
+
+    let cli = Cli::parse();
+
+    match &cli.command {
+        Some(Commands::FrameRateIndicator { state }) => {
+            if let Some(op_state) = state {
+                let toggle = parse_toggle(op_state);
+                match toggle {
+                    Some(true) => {
+                        let res = composer_service.enableRefreshRateOverlay(true);
+                        print_result("enableRefreshRateOverlay", res);
+                    }
+                    Some(false) => {
+                        let res = composer_service.enableRefreshRateOverlay(false);
+                        print_result("enableRefreshRateOverlay", res);
+                    }
+                    None => {
+                        eprintln!("Invalid state: {}, choices are [hide | show]", op_state);
+                    }
+                }
+            } else {
+                eprintln!("No state, choices are [hide | show]");
+            }
+        }
+        Some(Commands::DebugFlash { delay }) => {
+            let res = composer_service.setDebugFlash(*delay);
+            print_result("setDebugFlash", res);
+        }
+        Some(Commands::ScheduleComposite) => {
+            let res = composer_service.scheduleComposite();
+            print_result("scheduleComposite", res);
+        }
+        Some(Commands::ScheduleCommit) => {
+            let res = composer_service.scheduleCommit();
+            print_result("scheduleCommit", res);
+        }
+        Some(Commands::ForceClientComposition { state }) => {
+            if let Some(op_state) = state {
+                let toggle = parse_toggle(op_state);
+                match toggle {
+                    Some(true) => {
+                        let res = composer_service.forceClientComposition(true);
+                        print_result("forceClientComposition", res);
+                    }
+                    Some(false) => {
+                        let res = composer_service.forceClientComposition(false);
+                        print_result("forceClientComposition", res);
+                    }
+                    None => {
+                        eprintln!("Invalid state: {}, choices are [enabled | disabled]", op_state);
+                    }
+                }
+            } else {
+                eprintln!("No state, choices are [enabled | disabled]");
+            }
+        }
+        None => {
+            println!("Execute SurfaceFlinger internal commands.");
+            println!("run `adb shell sfdo help` for more to view the commands.");
+            println!("run `adb shell sfdo [COMMAND] --help` for more info on the command.");
+        }
+    }
+}

libs/gui/Android.bp

@@ -155,9 +155,9 @@ cc_library_static {
     },
 }
 
-aidl_library {
-    name: "libgui_aidl_hdrs",
-    hdrs: [
+filegroup {
+    name: "libgui_extra_aidl_files",
+    srcs: [
         "android/gui/DisplayInfo.aidl",
         "android/gui/FocusRequest.aidl",
         "android/gui/InputApplicationInfo.aidl",
@@ -170,11 +170,34 @@ aidl_library {
     ],
 }
 
+filegroup {
+    name: "libgui_extra_unstructured_aidl_files",
+    srcs: [
+        "android/gui/DisplayInfo.aidl",
+        "android/gui/InputApplicationInfo.aidl",
+        "android/gui/WindowInfo.aidl",
+        "android/gui/WindowInfosUpdate.aidl",
+    ],
+}
+
+aidl_library {
+    name: "libgui_aidl_hdrs",
+    hdrs: [":libgui_extra_aidl_files"],
+}
+
+aidl_library {
+    name: "libgui_extra_unstructured_aidl_hdrs",
+    hdrs: [":libgui_extra_unstructured_aidl_files"],
+}
+
 aidl_library {
     name: "libgui_aidl",
     srcs: ["aidl/**/*.aidl"],
     strip_import_prefix: "aidl",
-    deps: ["libgui_aidl_hdrs"],
+    deps: [
+        "libgui_aidl_hdrs",
+        "libgui_extra_unstructured_aidl_hdrs",
+    ],
 }
 
 filegroup {