Step 2/2: Added mezzanine back to top level

Changed the names of the mezzanine folders.

Signed-off-by: Robert Wolff <[email protected]>

mezzanine/README.md

@@ -0,0 +1,25 @@
+---
+title: Documentation for Mezzanine Products
+permalink: /documentation/MezzanineProducts/
+redirect_from: /documentation/MezzanineProducts/README.md/
+---
+## Mezzanine Guides
+
+Mezzanine Design Guidelines ([View](https://github.com/96boards/documentation/blob/master/MezzanineProducts/files/Mezzanine%20design%20guidelines.pdf) / [Download](https://github.com/96boards/documentation/raw/master/MezzanineProducts/files/Mezzanine%20design%20guidelines.pdf))
+
+## General
+
+Coming Soon...
+
+## Boards
+
+- [STM32 Sensor mezzanine board](STM32/)
+   - The STM32 Sensor board is a 96Boards mezzanine board based around the STM32F446 MCU
+- [Linker mezzanine card starter kit](LinkerMezzanineStarterKit/)
+   - 96Boards starter kit with Linker mezzanine card and loft modules
+- [96Boards UART Serial Adapter](UARTSerial/)
+   - USB to UART interface to be used with any 96Boards Consumer or Enterprise Edition board
+- [Sensors mezzanine](SensorsMezzanine/)
+   -  I/O Expansion board for IoT/Sensor applications, with SoC and Arduino-compatible Grove module interfaces, and Arduino-compatible shield connectors.
+- [Aero Core 2](AeroCore2/)
+   - The Aero Core 2 for 96Boards provides an ARM Cortex-M4 microcontroller for MAV control and much more...

mezzanine/aerocore2/README.md

@@ -0,0 +1,16 @@
+---
+title: Documentation for AeroCore2
+permalink: /documentation/MezzanineProducts/AeroCore2/
+redirect_from: /documentation/MezzanineProducts/AeroCore2/README.md/
+---
+## AeroCore 2 for 96Boards
+
+[Available here](http://link.linaro.org/aerocore2-buy), expanding on the AeroCore 2 product suite, the AeroCore 2 for 96Boards provides MAV control to the 96Boards.
+With an ARM Cortex-M4 microcontroller running NuttX RTOS and an integrated connection to the connected DragonBoard,
+AeroCore 2 gives users a complete Linux installation on a PX4-compatible platform. The addition of support for
+NimbeLink Skywire LTE modems makes the AeroCore 2 for DragonBoard the perfect platform for drone and swarm projects.
+Have your drone text you when i reaches it's waypoint or stream data to your server from anywhere over a high-speed LTE connection.
+The 9-axis internal measurement unit, along with an altimeter, monitored in real time by the embedded ARM M4 microcontroller,
+combined with optional geopositioning with the GPS connector, gives you accurate positional feedback from your drone.
+
+For more information, please visit the AeroCore 2 page at [96Boards](https://www.96boards.org/product/aerocore/)

mezzanine/audio-mezzanine/README.md

@@ -0,0 +1,8 @@
+---
+title: Documentation for Audio Mezzanine
+permalink: /documentation/MezzanineProducts/audio-mezzanine/
+redirect_from: /documentation/MezzanineProducts/audio-mezzanine/README.md/
+---
+## Audio Mezzanine for 96Boards
+
+Coming Soon...

mezzanine/d3camera/README.md

@@ -0,0 +1,8 @@
+---
+title: Documentation for D3 Camera Mezzanine
+permalink: /documentation/MezzanineProducts/d3camera/
+redirect_from: /documentation/MezzanineProducts/d3camera/README.md/
+---
+## D3 Camera Mezzanine for 96Boards
+
+Coming Soon...

mezzanine/ethernetcard/README.md

@@ -0,0 +1,5 @@
+---
+title: Documentation for Ethernet Mezzanine
+permalink: /documentation/MezzanineProducts/ethernetcard/
+redirect_from: /documentation/MezzanineProducts/ethernetcard/README.md/
+---

mezzanine/files/README.md

@@ -0,0 +1 @@
+

mezzanine/linkspritesensorkit/README.md

@@ -0,0 +1,24 @@
+---
+title: Documentation for Linker Mezzanine Starter Kit
+permalink: /documentation/MezzanineProducts/LinkerMezzanineStarterKit/
+redirect_from: /documentation/MezzanineProducts/LinkerMezzanineStarterKit/README.md/
+---
+## Linker mezzanine card starter kit
+
+[Available now](https://www.arrow.com/en/products/96boards-starter-kit/linksprite-technologies-inc). 96Boards starter kit with Linker mezzanine card and loft modules. All the Linker kit modules can be plugged onto 96Boards through this card. This starter kit is a great way to get started with 96Boards, and it contains the components you need to make eight fun projects following step-by-step tutorials. Starting from the basics of electronics modules, to more complex projects, the kit will help you control the physical world with sensor and actuators and help you ramp up your progamming using 96Boards.
+
+The Linker mezzanine card has eight connectors supporting Analog, UART, I2C and GPIO, and two channels of analog input using the MCP3004 ADC chip. There are bidirectional voltage-level translators which allows for low-voltage bidirectional translation between any of the 1.2-V,1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. So it is compatible with 3.3V or 5V modules and makes connecting peripherals easy. You just plug a jumper onto JP9 to select which input voltage you need.
+
+**Kit Includes**
+
+- 1 × [Linker Mezzanine card for 96board](http://linksprite.com/wiki/index.php5?title=Linker_Mezzanine_card_for_96board) [105101022]
+- 1 × [Button Module](http://linksprite.com/wiki/index.php5?title=Button_Module) [118101002]
+- 1 × [5mm Red LED Module](http://linksprite.com/wiki/index.php5?title=5mm_Red_LED_Module) [118101001-5]
+- 1 × [LDR Module](http://linksprite.com/wiki/index.php5?title=LDR_Module) [118101003]
+- 1 × [Thermal Module](http://linksprite.com/wiki/index.php5?title=Thermal_Module) [118101005]
+- 1 × [Linear/Slide Potentiometer Module](http://linksprite.com/wiki/index.php5?title=Linear/Slide_Potentiometer_Module) [118101006]
+- 1 × [Tilt Module](http://linksprite.com/wiki/index.php5?title=Tilt_Module) [118101004]
+- 1 × [Touch Sensor Module](http://linksprite.com/wiki/index.php5?title=Touch_Sensor_Module) [118101007]
+- 1 × [Relay Module](http://linksprite.com/wiki/index.php5?title=Relay_Module) [118101008]
+- 8 × [20cm Cables](http://linksprite.com/wiki/index.php5?title=20cm_Cables) [118201001]
+- 1 × [Plastic case]()

mezzanine/mipiadapter/README.md

@@ -0,0 +1,8 @@
+---
+title: Documentation for MIPI Camera Card
+permalink: /documentation/MezzanineProducts/mipiadapter/
+redirect_from: /documentation/MezzanineProducts/mipiadapter/README.md/
+---
+## MIPI Camera Mezzanine for 96Boards
+
+Coming Soon...

mezzanine/neonkey/README.md

@@ -0,0 +1,8 @@
+---
+title: Documentation for NeonKey
+permalink: /documentation/MezzanineProducts/neonkey/
+redirect_from: /documentation/MezzanineProducts/neonkey/README.md/
+---
+## NeonKey for 96Boards
+
+Coming Soon...

mezzanine/sensors-mezzanine/README.md

@@ -0,0 +1,28 @@
+---
+title: Documentation for Sensors Mezzanine
+permalink: /documentation/MezzanineProducts/SensorsMezzanine/
+redirect_from: /documentation/MezzanineProducts/SensorsMezzanine/README.md/
+---
+## Sensors mezzanine
+
+Available now from [Seeed](http://linaro.co/1KnV9TA): Can be used with any base board compatible with the 96Boards Consumer Edition or Enterprise Edition specifications.
+
+***
+
+The 96Boards Sensors Mezzanine adapter makes it simple and easy to connect sensors and devices to any 96Boards-compatible base board. With it you can connect your favourite Grove modules and Arduino compatible shields and interface to software running on the 96Boards baseboard. It provides everything you need to start experimenting and prototyping on the 96Boards platform.
+
+On the board you will find sockets for 18 Grove modules, an Arduino-compatible shield socket, and two SPI headers. It also includes an ATMega328 microcontroller which can be programmed from the Arduino IDE and will run most Arduino UNO sketches unchanged. The shield connector and half of the Grove sockets are controlled by the microcontroller, while the remaining Grove sockets are controlled directly by the baseboard. This makes it a flexible prototyping platform which supports both direct control of devices from application software, and offload to a microcontroller. It also provides a USB-UART interface to access the base board’s serial console.
+
+**I/O Specification**
+
+- Compatible with 96Boards CE and EE baseboards
+- Integrated Arduino-compatible ATMEGA328 microcontroller
+- Arduino UNO compatible expansion headers
+- 9 Grove connectors for 96Boards IO (mixed 3.3V and 5V; all 5V tolerant): 5x GPIO, and 4x I2C
+- 9 Grove connectors for ATMEGA328 IO (all 5V): 5x GPIO, 3x ADC, and 1x I2C
+- 2 6-pin SPI headers
+- MicroUSB interface to 96Boards console serial port
+- 1 Power LED
+- 3 user LEDs
+- Reset button
+- Power button

mezzanine/stm32/README.md

@@ -0,0 +1,8 @@
+---
+title: Documentation for STM32 Sensor mezzanine board
+permalink: /documentation/MezzanineProducts/STM32/
+redirect_from: /documentation/MezzanineProducts/STM32/README.md/
+---
+## STM32 Sensor mezzanine board
+
+The STM32 Sensor board is a 96Boards mezzanine board based around the STM32F446 MCU (named B-F446E-96B01A). This board enables users to prototype systems that are aware of their environment, thanks to the embedded sensors for movement, pressure and sound. It can be plugged directly on top of 96Boards consumer edition (CE) products and supports multiple expansion possibilities through the Arduino™ Uno Revision 3 and Grove™connectivity. The integrated ST-Link debugger facilitates software development, drag-and-drop programming and provides direct access to the ARM® mbed™on-line resources.

mezzanine/uartserial/README.md

@@ -0,0 +1,14 @@
+---
+title: Documentation for 96Boards UART Serial Adapter
+permalink: /documentation/MezzanineProducts/UARTSerial/
+redirect_from: /documentation/MezzanineProducts/UARTSerial/README.md/
+---
+## 96Boards UART Serial Adapter
+
+Available now from [Seeed](http://linaro.co/1KnV9TA): Can be used with any base board compatible with the 96Boards Consumer Edition or Enterprise Edition specifications.
+
+***
+
+The 96Boards Sensors Mezzanine adapter makes it simple and easy to connect sensors and devices to any 96Boards-compatible base board. With it you can connect your favourite Grove modules and Arduino compatible shields and interface to software running on the 96Boards baseboard. It provides everything you need to start experimenting and prototyping on the 96Boards platform.
+
+On the board you will find sockets for 18 Grove modules, an Arduino-compatible shield socket, and two SPI headers. It also includes an ATMega328 microcontroller which can be programmed from the Arduino IDE and will run most Arduino UNO sketches unchanged. The shield connector and half of the Grove sockets are controlled by the microcontroller, while the remaining Grove sockets are controlled directly by the baseboard. This makes it a flexible prototyping platform which supports both direct control of devices from application software, and offload to a microcontroller. It also provides a USB-UART interface to access the base board’s serial console.