Merge tag 'v4.9.36' into linux-4.9.x-unofficial_grsec

This is the 4.9.36 stable release Signed-off-by: Mathias Krause <[email protected]> Conflicts: arch/x86/boot/compressed/misc.c arch/x86/mm/init_64.c drivers/net/virtio_net.c mm/vmalloc.c
minipli · Jul 14, 2017 · de9e2b2 · de9e2b2
2 parents 8c2c0e2 + 9f86f30
commit de9e2b2
Show file tree

Hide file tree

Showing 186 changed files with 1,677 additions and 803 deletions.
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
@@ -7,7 +7,7 @@ have dual GMAC each represented by a child node..
 * Ethernet controller node
 
 Required properties:
-- compatible: Should be "mediatek,mt7623-eth"
+- compatible: Should be "mediatek,mt2701-eth"
 - reg: Address and length of the register set for the device
 - interrupts: Should contain the three frame engines interrupts in numeric
 	order. These are fe_int0, fe_int1 and fe_int2.

diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
@@ -35,6 +35,15 @@ Optional Properties:
 - broken-turn-around: If set, indicates the PHY device does not correctly
   release the turn around line low at the end of a MDIO transaction.
 
+- eee-broken-100tx:
+- eee-broken-1000t:
+- eee-broken-10gt:
+- eee-broken-1000kx:
+- eee-broken-10gkx4:
+- eee-broken-10gkr:
+  Mark the corresponding energy efficient ethernet mode as broken and
+  request the ethernet to stop advertising it.
+
 Example:
 
 ethernet-phy@0 {

diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt
@@ -3,9 +3,11 @@
 Required properties:
 	- reg - The ID number for the phy, usually a small integer
 	- ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values
+		for applicable values. Required only if interface type is
+		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID
 	- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values
+		for applicable values. Required only if interface type is
+		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID
 	- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
 		for applicable values
 

diff --git a/Makefile b/Makefile
@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 9
-SUBLEVEL = 35
+SUBLEVEL = 36
 EXTRAVERSION =
 NAME = Roaring Lionus
 

diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -121,7 +121,7 @@
 &i2c3 {
 	clock-frequency = <400000>;
 	at24@50 {
-		compatible = "at24,24c02";
+		compatible = "atmel,24c64";
 		readonly;
 		reg = <0x50>;
 	};

diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
@@ -222,6 +222,14 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 				dev_err(dev, "failed to idle\n");
 		}
 		break;
+	case BUS_NOTIFY_BIND_DRIVER:
+		od = to_omap_device(pdev);
+		if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED) &&
+		    pm_runtime_status_suspended(dev)) {
+			od->_driver_status = BUS_NOTIFY_BIND_DRIVER;
+			pm_runtime_set_active(dev);
+		}
+		break;
 	case BUS_NOTIFY_ADD_DEVICE:
 		if (pdev->dev.of_node)
 			omap_device_build_from_dt(pdev);

diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
@@ -1252,15 +1252,15 @@ void __init adjust_lowmem_bounds(void)
 
 	high_memory = __va(arm_lowmem_limit - 1) + 1;
 
+	if (!memblock_limit)
+		memblock_limit = arm_lowmem_limit;
+
 	/*
 	 * Round the memblock limit down to a pmd size.  This
 	 * helps to ensure that we will allocate memory from the
 	 * last full pmd, which should be mapped.
 	 */
-	if (memblock_limit)
-		memblock_limit = round_down(memblock_limit, PMD_SIZE);
-	if (!memblock_limit)
-		memblock_limit = arm_lowmem_limit;
+	memblock_limit = round_down(memblock_limit, PMD_SIZE);
 
 	if (!IS_ENABLED(CONFIG_HIGHMEM) || cache_is_vipt_aliasing()) {
 		if (memblock_end_of_DRAM() > arm_lowmem_limit) {

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -85,6 +85,18 @@
 	status = "okay";
 	pinctrl-0 = <&eth_pins>;
 	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			reg = <0>;
+			eee-broken-1000t;
+		};
+	};
 };
 
 &ir {

diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
@@ -22,9 +22,9 @@
 #define ACPI_MADT_GICC_LENGTH	\
 	(acpi_gbl_FADT.header.revision < 6 ? 76 : 80)
 
-#define BAD_MADT_GICC_ENTRY(entry, end)						\
-	(!(entry) || (unsigned long)(entry) + sizeof(*(entry)) > (end) ||	\
-	 (entry)->header.length != ACPI_MADT_GICC_LENGTH)
+#define BAD_MADT_GICC_ENTRY(entry, end)					\
+	(!(entry) || (entry)->header.length != ACPI_MADT_GICC_LENGTH ||	\
+	(unsigned long)(entry) + ACPI_MADT_GICC_LENGTH > (end))
 
 /* Basic configuration for ACPI */
 #ifdef	CONFIG_ACPI

diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
@@ -155,22 +155,25 @@ lr	.req	x30		// link register
 
 /*
  * Pseudo-ops for PC-relative adr/ldr/str <reg>, <symbol> where
- * <symbol> is within the range +/- 4 GB of the PC.
+ * <symbol> is within the range +/- 4 GB of the PC when running
+ * in core kernel context. In module context, a movz/movk sequence
+ * is used, since modules may be loaded far away from the kernel
+ * when KASLR is in effect.
  */
 	/*
 	 * @dst: destination register (64 bit wide)
 	 * @sym: name of the symbol
-	 * @tmp: optional scratch register to be used if <dst> == sp, which
-	 *       is not allowed in an adrp instruction
 	 */
-	.macro	adr_l, dst, sym, tmp=
-	.ifb	\tmp
+	.macro	adr_l, dst, sym
+#ifndef MODULE
 	adrp	\dst, \sym
 	add	\dst, \dst, :lo12:\sym
-	.else
-	adrp	\tmp, \sym
-	add	\dst, \tmp, :lo12:\sym
-	.endif
+#else
+	movz	\dst, #:abs_g3:\sym
+	movk	\dst, #:abs_g2_nc:\sym
+	movk	\dst, #:abs_g1_nc:\sym
+	movk	\dst, #:abs_g0_nc:\sym
+#endif
 	.endm
 
 	/*
@@ -181,13 +184,23 @@ lr	.req	x30		// link register
 	 *       the address
 	 */
 	.macro	ldr_l, dst, sym, tmp=
+#ifndef MODULE
 	.ifb	\tmp
 	adrp	\dst, \sym
 	ldr	\dst, [\dst, :lo12:\sym]
 	.else
 	adrp	\tmp, \sym
 	ldr	\dst, [\tmp, :lo12:\sym]
 	.endif
+#else
+	.ifb	\tmp
+	adr_l	\dst, \sym
+	ldr	\dst, [\dst]
+	.else
+	adr_l	\tmp, \sym
+	ldr	\dst, [\tmp]
+	.endif
+#endif
 	.endm
 
 	/*
@@ -197,8 +210,13 @@ lr	.req	x30		// link register
 	 *       while <src> needs to be preserved.
 	 */
 	.macro	str_l, src, sym, tmp
+#ifndef MODULE
 	adrp	\tmp, \sym
 	str	\src, [\tmp, :lo12:\sym]
+#else
+	adr_l	\tmp, \sym
+	str	\src, [\tmp]
+#endif
 	.endm
 
 	/*

diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
@@ -934,7 +934,7 @@ static bool have_cpu_die(void)
 #ifdef CONFIG_HOTPLUG_CPU
 	int any_cpu = raw_smp_processor_id();
 
-	if (cpu_ops[any_cpu]->cpu_die)
+	if (cpu_ops[any_cpu] && cpu_ops[any_cpu]->cpu_die)
 		return true;
 #endif
 	return false;

diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
@@ -11,6 +11,7 @@
 #include <asm/asm.h>
 #include <asm/asmmacro.h>
 #include <asm/compiler.h>
+#include <asm/irqflags.h>
 #include <asm/regdef.h>
 #include <asm/mipsregs.h>
 #include <asm/stackframe.h>
@@ -137,6 +138,7 @@ work_pending:
 	andi	t0, a2, _TIF_NEED_RESCHED # a2 is preloaded with TI_FLAGS
 	beqz	t0, work_notifysig
 work_resched:
+	TRACE_IRQS_OFF
 	jal	schedule
 
 	local_irq_disable		# make sure need_resched and
@@ -173,6 +175,7 @@ syscall_exit_work:
 	beqz	t0, work_pending	# trace bit set?
 	local_irq_enable		# could let syscall_trace_leave()
 					# call schedule() instead
+	TRACE_IRQS_ON
 	move	a0, sp
 	jal	syscall_trace_leave
 	b	resume_userspace

diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
@@ -106,8 +106,8 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 	beq		t0, t1, dtb_found
 #endif
 	li		t1, -2
-	beq		a0, t1, dtb_found
 	move		t2, a1
+	beq		a0, t1, dtb_found
 
 	li		t2, 0
 dtb_found:

diff --git a/arch/mips/kernel/pm-cps.c b/arch/mips/kernel/pm-cps.c
@@ -56,7 +56,6 @@ DECLARE_BITMAP(state_support, CPS_PM_STATE_COUNT);
  * state. Actually per-core rather than per-CPU.
  */
 static DEFINE_PER_CPU_ALIGNED(u32*, ready_count);
-static DEFINE_PER_CPU_ALIGNED(void*, ready_count_alloc);
 
 /* Indicates online CPUs coupled with the current CPU */
 static DEFINE_PER_CPU_ALIGNED(cpumask_t, online_coupled);
@@ -642,7 +641,6 @@ static int cps_pm_online_cpu(unsigned int cpu)
 {
 	enum cps_pm_state state;
 	unsigned core = cpu_data[cpu].core;
-	unsigned dlinesz = cpu_data[cpu].dcache.linesz;
 	void *entry_fn, *core_rc;
 
 	for (state = CPS_PM_NC_WAIT; state < CPS_PM_STATE_COUNT; state++) {
@@ -662,16 +660,11 @@ static int cps_pm_online_cpu(unsigned int cpu)
 	}
 
 	if (!per_cpu(ready_count, core)) {
-		core_rc = kmalloc(dlinesz * 2, GFP_KERNEL);
+		core_rc = kmalloc(sizeof(u32), GFP_KERNEL);
 		if (!core_rc) {
 			pr_err("Failed allocate core %u ready_count\n", core);
 			return -ENOMEM;
 		}
-		per_cpu(ready_count_alloc, core) = core_rc;
-
-		/* Ensure ready_count is aligned to a cacheline boundary */
-		core_rc += dlinesz - 1;
-		core_rc = (void *)((unsigned long)core_rc & ~(dlinesz - 1));
 		per_cpu(ready_count, core) = core_rc;
 	}
 

diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
@@ -199,6 +199,8 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 {
 	struct pt_regs regs;
 	mm_segment_t old_fs = get_fs();
+
+	regs.cp0_status = KSU_KERNEL;
 	if (sp) {
 		regs.regs[29] = (unsigned long)sp;
 		regs.regs[31] = 0;

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
@@ -298,9 +298,17 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
 	 *
 	 * For pHyp, we have to enable IO for log retrieval. Otherwise,
 	 * 0xFF's is always returned from PCI config space.
+	 *
+	 * When the @severity is EEH_LOG_PERM, the PE is going to be
+	 * removed. Prior to that, the drivers for devices included in
+	 * the PE will be closed. The drivers rely on working IO path
+	 * to bring the devices to quiet state. Otherwise, PCI traffic
+	 * from those devices after they are removed is like to cause
+	 * another unexpected EEH error.
 	 */
 	if (!(pe->type & EEH_PE_PHB)) {
-		if (eeh_has_flag(EEH_ENABLE_IO_FOR_LOG))
+		if (eeh_has_flag(EEH_ENABLE_IO_FOR_LOG) ||
+		    severity == EEH_LOG_PERM)
 			eeh_pci_enable(pe, EEH_OPT_THAW_MMIO);
 
 		/*

diff --git a/arch/s390/include/asm/ctl_reg.h b/arch/s390/include/asm/ctl_reg.h
@@ -15,7 +15,9 @@
 	BUILD_BUG_ON(sizeof(addrtype) != (high - low + 1) * sizeof(long));\
 	asm volatile(							\
 		"	lctlg	%1,%2,%0\n"				\
-		: : "Q" (*(addrtype *)(&array)), "i" (low), "i" (high));\
+		:							\
+		: "Q" (*(addrtype *)(&array)), "i" (low), "i" (high)	\
+		: "memory");						\
 }
 
 #define __ctl_store(array, low, high) {					\

diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
@@ -1021,7 +1021,7 @@ static void __init alloc_one_queue(unsigned long *pa_ptr, unsigned long qmask)
 	unsigned long order = get_order(size);
 	unsigned long p;
 
-	p = __get_free_pages(GFP_KERNEL, order);
+	p = __get_free_pages(GFP_KERNEL | __GFP_ZERO, order);
 	if (!p) {
 		prom_printf("SUN4V: Error, cannot allocate queue.\n");
 		prom_halt();