Merge pull request #20 from L1cardo/master

add schematic of CRSFJoystick2.0 and ELRSJoystick
mikeneiderhauser · Nov 25, 2023 · 88a08a0 · 88a08a0
2 parents 14b8fae + a0f823c
commit 88a08a0
Show file tree

Hide file tree

Showing 39 changed files with 9,620 additions and 43,175 deletions.
diff --git a/README.md b/README.md
@@ -190,7 +190,21 @@ Approx part cost for pico hardware (large footprint, cheaper) - $20-$25
 - Carrier Board - $1.00 (approx)
 - Shipping / Tax from vendors - varies
 
-# Carrier Boards (Tiny Version)
+# Carrier Boards
+
+## ELRSJoystick
+
+This board has an ELRS RX built in, so you don't need to wire any RX on, just plug in and connect to your ELRS TX, then you are ready to go!
+
+![](./photos/ELRSJoystick/1.png)
+![](./photos/ELRSJoystick/2.png)
+![](./photos/ELRSJoystick/3.png)
+![](./photos/ELRSJoystick/4.png)
+![](./photos/ELRSJoystick/5.png)
+![](./photos/ELRSJoystick/6.png)
+![](./photos/ELRSJoystick/7.png)
+
+## Tiny Version
 
 > **_NOTE:_** References to level shifters below are no longer needed as the level shifter can be omitted. You will have to bridge the pads on the level shifter for the TX/RX pins or use a newer version of the carrier board.
 
@@ -245,13 +259,17 @@ Board files now in the hardware folder.  Not built or tested but should work.
 
 Build a smaller pico by yourself.
 
-![CRSFJoystick2.3 Board Front](./photos/crsfjoystick2.0/board_v2.3_front.JPG)
-
-![CRSFJoystick2.3 Board Back](./photos/crsfjoystick2.0/board_v2.3_back.JPG)
-
-![CRSFJoystick2.3 Render Front](./photos/crsfjoystick2.0/board_v2.3_render_front.png)
-
-![CRSFJoystick2.3 Render Back](./photos/crsfjoystick2.0/board_v2.3_render_back.png)
+![CRSFJoystick2.3 Board Front](./photos/CRSFJoystick2.0/board_v2.3_front.JPG)
+![CRSFJoystick2.3 Board Back](./photos/CRSFJoystick2.0/board_v2.3_back.JPG)
+![CRSFJoystick2.3 Render Front](./photos/CRSFJoystick2.0/board_v2.3_render_front.png)
+![CRSFJoystick2.3 Render Back](./photos/CRSFJoystick2.0/board_v2.3_render_back.png)
+![CRSFJoystick2.3 Render Back](./photos/CRSFJoystick2.0/1.png)
+![CRSFJoystick2.3 Render Back](./photos/CRSFJoystick2.0/2.png)
+![CRSFJoystick2.3 Render Back](./photos/CRSFJoystick2.0/3.png)
+![CRSFJoystick2.3 Render Back](./photos/CRSFJoystick2.0/4.png)
+![CRSFJoystick2.3 Render Back](./photos/CRSFJoystick2.0/5.png)
+![CRSFJoystick2.3 Render Back](./photos/CRSFJoystick2.0/6.png)
+![CRSFJoystick2.3 Render Back](./photos/CRSFJoystick2.0/7.png)
 
 # General Assembly
 

diff --git a/STL/CRSFJoystick b/STL/CRSFJoystick
diff --git a/STL/Waveshare_2040/Waveshare PR2040 top.stl → ...k/Waveshare_2040/Waveshare PR2040 top.stl b/STL/Waveshare_2040/Waveshare PR2040 top.stl → ...k/Waveshare_2040/Waveshare PR2040 top.stl
diff --git a/...Waveshare_2040/Waveshare RP2040 Lower.stl → ...Waveshare_2040/Waveshare RP2040 Lower.stl b/...Waveshare_2040/Waveshare RP2040 Lower.stl → ...Waveshare_2040/Waveshare RP2040 Lower.stl
diff --git a/STL/Lower.stl → STL/CRSFJoystick/v1.0/Lower.stl b/STL/Lower.stl → STL/CRSFJoystick/v1.0/Lower.stl
diff --git a/STL/Pico Lower.stl → STL/CRSFJoystick/v1.0/Pico Lower.stl b/STL/Pico Lower.stl → STL/CRSFJoystick/v1.0/Pico Lower.stl
diff --git a/STL/pico top.stl → STL/CRSFJoystick/v1.0/pico top.stl b/STL/pico top.stl → STL/CRSFJoystick/v1.0/pico top.stl
diff --git a/STL/spacer.stl → STL/CRSFJoystick/v1.0/spacer.stl b/STL/spacer.stl → STL/CRSFJoystick/v1.0/spacer.stl
diff --git a/STL/top.stl → STL/CRSFJoystick/v1.0/top.stl b/STL/top.stl → STL/CRSFJoystick/v1.0/top.stl
diff --git a/STL/CRSFJoystick/v2.3/Bottom.STL b/STL/CRSFJoystick/v2.3/Bottom.STL
diff --git a/STL/CRSFJoystick/v2.3/Cover.STL b/STL/CRSFJoystick/v2.3/Cover.STL
diff --git a/STL/CRSFJoystick/v2.3/Top.STL b/STL/CRSFJoystick/v2.3/Top.STL