Compass is the Golang implementation of cross-chain communication maintainer for MAP Protocol. It currently supports bridging between EVM based chains.
The Compass is an independent service, it contains two operating modes, Maintainer and Messenger mode, users need specify a mode to start the service program
The newly designed compass version contains all the functions required to run the relay node. With this tool, you can run nodes on almost all hardware platforms.
This project is inspired by ChainSafe/ChainBridge
- Compass
- Contents
- Quick Start
- Building
- Maintainer
- Messenger
- Monitor
- Configuration
- Chain Implementations
the recommanded way to get the executable is to download it from the release page.
if you want to build it from the source code,check the building section below.
fund some accounts in order to send txs on each chain, you want to provice crosse-chain service. the esaiest way is to using the same one address for every chain. Please prepare an account keystore.
copy a example configure file from
{
"mapchain": {
"id": "212",
"endpoint": "http://18.142.54.137:7445",
"from": "0xE0DC8D7f134d0A79019BEF9C2fd4b2013a64fCD6",
"keystorePath": "/root/UTC-E0DC8D7f134d0A79019BEF9C2fd4b2013a64fCD6",
"opts": {
"mcs": "0x0ac4611305254cdd257beC56CB79CBeC720Cd02D",
"lightnode": "0x000068656164657273746F726541646472657373",
"http": "true",
"gasLimit": "4000000000000",
"maxGasPrice": "2000000000000",
"syncIdList": "[34434]"
}
},
"chains": [
{
"name": "pri-eth",
"type": "ethereum",
"id": "34434",
"endpoint": "http://18.138.248.113:8545",
"from": "0xE0DC8D7f134d0A79019BEF9C2fd4b2013a64fCD6",
"keystorePath": "/root/UTC-E0DC8D7f134d0A79019BEF9C2fd4b2013a64fCD6",
"opts": {
"mcs": "0xcfc80beddb70f12af6da768fc30e396889dfce26",
"lightnode": "0x80Be41aEBFdaDBD58a65aa549cB266dAFb6b8304",
"http": "true",
"gasLimit": "400000000000",
"maxGasPrice": "200000000000",
"syncToMap": "true"
}
}
]
}modify the configuration accordingly.
fill the accounts for each chain.
lauch and keep the executable runing simply by run:
compass-oracle maintainer --blockstore ./block-eth-map --config ./config-mcs-erh-map.jsonyou will be asked to input the password to unlock your account.(which you have inputed at step 2) if everything runs smoothly. it's all set
Building compass requires a Go compiler(version 1.16 or later)
under the root directory of the repo
make build: Builds compass in ./build.
make install: Uses go install to add compass to your GOBIN.
use the oracle mode to synchronize the information of blocks in each chain according to the information in the configuration file
Start with the following command:
compass-oracle oracle --blockstore ./block-eth-map --config ./config.json --keystorePath ./key.jsonSynchronize the information of blocks in each chain according to the information in the configuration file
Start with the following command:
compass-oracle maintainer --blockstore ./block-eth-map --config ./config.jsonSynchronize the log information of transactions of blocks in each chain according to the information in the configuration file
Start with the following command:
compass-oracle messenger --blockstore ./block-eth-map --config ./config.jsonthe configuration file is a small JSON file.
{
"mapchain": {
"id": "0", // Chain ID of the MAP chain
"endpoint": "ws://<host>:<port>", // Node endpoint
"from": "0xff93...", // MAP chain address of maintainer
"opts": {} // MAP Chain configuration options (see below)
},
"chains": [] // List of Chain configurations
}
A chain configurations take this form:
{
"name": "eth", // Human-readable name
"type": "ethereum", // Chain type (Please see the following cousin for details)
"id": "0", // Chain ID
"endpoint": "ws://<host>:<port>", // Node endpoint
"from": "0xff93...", // On-chain address of maintainer
"keystorePath" : "keystore/path/", // keystore path, plase user abs path
"opts": {}, // Chain-specific configuration options (see below)
}
| chain | type |
|---|---|
| ethereum | ethereum |
| bsc | bsc |
| goerli | eth2 |
| polygon | matic |
| near | near |
| klaytn | klaytn |
| platon | platon |
| conflux | conflux |
| merlin | ethereum |
| blast | ethereum |
| filecoin | ethereum |
| bevm | ethereum |
| bttc | bttc |
See config.json.example for an example configuration.
Since MAP is also a EVM based chain, so the opts of the mapchain is following the options below as well
Ethereum chains support the following additional options:
{
"mcs": "0x12345...", // Address of the bridge contract (required)
"maxGasPrice": "0x1234", // Gas price for transactions (default: 50000000)
"gasLimit": "0x1234", // Gas limit for transactions (default: 1000000)
"gasMultiplier": "1.25", // Multiplies the gas price by the supplied value (default: 1)
"startBlock": "1234", // The block to start processing events from (default: 0)
"blockConfirmations": "10" // Number of blocks to wait before processing a block (default: 20)
"lightnode": "0x12345...", // the lightnode to sync header
"syncToMap": "false", // Whether sync blockchain headers to Map，(default : true)
"syncIdList": "[214]" // Those chain ids are synchronized to the map，and This configuration can only be used in mapchain
"event": "mapTransferOut(...)|depositOutToken(...)", // MCS events monitored by the program, multiple with | interval，
// Here we give the events that need to be monitored，Map:mapTransferOut(bytes,bytes,bytes32,uint256,uint256,bytes,uint256,bytes) Near: 2ef1cdf83614a69568ed2c96a275dd7fb2e63a464aa3a0ffe79f55d538c8b3b5|150bd848adaf4e3e699dcac82d75f111c078ce893375373593cc1b9208998377
"oracleNode": "1234" // use to match oracle event
}
The blockstore is used to record the last block the maintainer processed, so it can pick up where it left off.
To disable loading from the chunk library, specify the "--fresh" flag. Add the fresh flag, and the program will execute from height 0，
In addition, the configuration file provides the "startBlock" option, and the program will execute from the startBlock
Compass requires keys to sign and submit transactions, and to identify each bridge node on chain.
To use secure keys, see compass accounts --help. The keystore password can be supplied with the KEYSTORE_PASSWORD environment variable.
To import external ethereum keys, such as those generated with geth, use compass accounts import --ethereum /path/to/key.
To import private keys as keystores, use compass accounts import --privateKey key.
- Ethereum (Solidity): contracts The Solidity contracts required for compass. Includes scripts for deployment.
If you need to synchronize the near block, please install the near cli first. Here is a simple tutorial. For more information,
please check Near cli installation tutorial
First, install npm. Depending on the system, the running command is different. The following is an example of the installation command in
the ubuntu system. Use the apt install npm command to run npm install -g near cli,
After installation, use 'near -- version' to check whether the installation is successful
Configure the environment you need, for example:
` export NEAR_CLI_LOCALNET_RPC_SERVER_URL=https://archival-rpc.testnet.near.org
export NEAR_ENV=testnet `
Use the 'near login' command , Creates a key pair locally in .near-credentials with an implicit account as the accountId. (hash representation of the public key)
And record the directory to the keystorePath option in the configuration file
In addition, another program needs to be run for near messenger. Please check near-lake-s3