Update README.md

Doc for new release
mamin27 · Jul 11, 2024 · 87865cc · 87865cc
1 parent d8e7f8a
commit 87865cc
Showing 1 changed file with 29 additions and 9 deletions.
diff --git a/README.md b/README.md
@@ -1,6 +1,6 @@
 # ecomet_i2c_raspberry_tools
 
-**Last modification:** 12.03.2024
+**Last modification:** 11.07.2024
 **Contributor:** Marian Minar
 
 **Dont forget to add ![/python_test_script/display/images/star.png](https://github.com/mamin27/ecomet_i2c_raspberry_tools/blob/master/python_test_scripts/display/images/star.png) if you were satisfy with the software!**
@@ -21,19 +21,22 @@ Project eCScope was created to show progress in development. Insert the #eCScope
 **Current release:** 0.1.8
 
 **New features**
+
 * AXP209 driver added (X-Powers)
 * TSL25911 driver added (Osram-AMS)
 * add i2c_interface parameter as switch for libraries Adafruit_PureIO or smbus2
-* Add Allwiner CPU A10 driver, olimex OLinuXino A10
-* update load_config_yaml
+* Add Allwiner CPU A10 driver, olimex OLinuXino A10 update load_config_yaml
 
-Python3 library - **Stable status**
 ```sh
 pip install ecomet-i2c-sensors
 ```
-**Test release:** 0.1.9.post1
+**Test release:** 0.1.9.post2
+* AS3935 driver added (Sciosens)
+* SGP40 driver added (Sensirion)
+* MCP3221 driver added (Microchip)
+* MCP3221 added feature for convert measured number to range or 360 degree, or cardinal points
+* Fixes in PCA9632, prepared for multiple chips at I2C bus
 
-Python3 library - **Alpfa status**
 ```sh
 pip3 install -i https://test.pypi.org/simple/ecomet-i2c-sensors
 ```
@@ -51,7 +54,7 @@ The Driver for I2C Chip maintenance from **Raspberry PI 1B+** and above and **Al
 * EEPROM Chip
   24c01,24c02,24c04,24c08,24c16,24c32,24c64,24c128,24c256,24c512,24c1024
 * [Measurement Specialties, TE Connectivity](https://www.te.com/) MS5637,HTU21D
-* [Microchip](https://ww1.microchip.com/downloads/en/DeviceDoc/2301.pdf) EMC2301
+* [Microchip](https://ww1.microchip.com/downloads/en/DeviceDoc/2301.pdf) EMC2301, MCP3221
 * [NXP Semiconductor](https://www.nxp.com/)
   PCA9632 (could be modified for PCA9624,PCA9635PW,PCA9685,PCA9955B,PCA9956B)
   PCA9557
@@ -74,10 +77,11 @@ The Driver for I2C Chip maintenance from **Raspberry PI 1B+** and above and **Al
 * [HTU21D module](ecomet_i2c_sensors/htu21/htu21_python_IIC.md) -> Digital Relative Humidity sensor with Temperature output, calculation of Dew Point
 * [INA226,INA260 module](ecomet_i2c_sensors/ina260/ina260_python.IIC.md) -> Precision Digital Current and Power Monitor With Low-Drift, Precision Integrated Shunt
 * ISL2802x module ->  will be added python module description
+* [MCP3221 module](https://ww1.microchip.com/downloads/en/DeviceDoc/20001732E.pdf) ->  **!NEW!** Low-Power 12-Bit A/D Converter
 * [MS5637 module](ecomet_i2c_sensors/ms5637/ms5637_python.IIC.md) ->  Ultra-compact micro altimeter. Integrated digital pressure sensor (24 bit ΔΣ ADC), Operating range: 300 to 1200 mbar, -40 to +85 °C
 * [PCA9557 module](ecomet_i2c_sensors/pca9557/pca9557_python.IIC.md) -> Remote8-Bit I2C and SMBusLow-PowerI/O ExpanderWith Reset andConfigurationRegisters
 * [PCA9632 module](fpc/pca9632/pca9632_IIC.md) -> 4-bit Fm+ I2C-bus low power LED driver (could be used for motor control)
-* [SGP40 module](https://sensirion.com/products/catalog/SGP40) -> **!NEW!** Indoor Air Quality Sensor for VOC Measurements
+* [SGP40 module](https://sensirion.com/products/catalog/SGP40) -> Indoor Air Quality Sensor for VOC Measurements
 * [SN-GCJA5](ecomet_i2c_sensors/sn_gcja5/sn_gcja5_python.IIC.md) -> Laser Type PM Sensor
 * [SSD1306 module](ecomet_i2c_sensors/ssd1306/ssd1306_python.IIC.md) -> SSD1306 is a single-chip CMOS OLED/PLED driver with controller for organic / polymer light emitting
 diode dot-matrix graphic display system.
@@ -97,11 +101,12 @@ diode dot-matrix graphic display system.
 | HTU21D          |[yes](ecomet_i2c_sensors/htu21/htu21_python_IIC.md)|    no    |[I03](https://github.com/mamin27/ecomet_i2c_raspberry_tools/wiki/_temp_hmd_board),[I04](https://github.com/mamin27/ecomet_i2c_raspberry_tools/wiki/_temp_hmd_pressure_board)|                              |       |                               |
 | INA226, INA260  |[yes](ecomet_i2c_sensors/ina260/ina260_python_IIC.md)|    yes    |[I01](https://github.com/mamin27/ecomet_i2c_raspberry_tools/wiki/_display_current_board) | |     |
 | ISL2802x  |in progress |    no    | | |     |
+| MCP3221  |yes [check](wiki/common/support.md) |    no    | | |     |
 | MS5637          |[yes](ecomet_i2c_sensors/ms5637/ms5637_python.IIC.md)|    no    |[I04](https://github.com/mamin27/ecomet_i2c_raspberry_tools/wiki/_temp_hmd_pressure_board)|                  |      |
 | PCA9557         |[yes](ecomet_i2c_sensors/pca9557/pca9557_python.IIC.md)|    no    |[I01](https://github.com/mamin27/ecomet_i2c_raspberry_tools/wiki/_display_current_board)|  |            |
 | PCA9632         |[yes](ecomet_i2c_sensors/pca9632/pca_9632_python_IIC.md)|[yes](fpc/pca9632/pca9632_IIC.md)|[I04](https://github.com/mamin27/ecomet_i2c_raspberry_tools/wiki/_temp_hmd_pressure_board)|                  |                               |                               |
 |SN-GCJA5|yes [check](wiki/common/support.md)|    no    | | |     |
-|**!NEW!** SGP40|yes [check](wiki/common/support.md)|    no    | | |     |
+|SGP40|yes [check](wiki/common/support.md)|    no    | | |     |
 | SSD1306         |[yes](ecomet_i2c_sensors/ssd1306/ssd1306_python.IIC.md)|    no    |[I01](https://github.com/mamin27/ecomet_i2c_raspberry_tools/wiki/_display_current_board) | |     |
 |TSL25911|yes [check](wiki/common/support.md)|    no    | | |     |
 
@@ -123,6 +128,18 @@ i2c:
       ic: '24c01'
       slaveaddr: 0x50
       writestrobe: 26 # hold pin low to write to eeprom
+sensor:
+      ms5637:
+        pressure:
+          { min: 600, max: 1300 }
+      sn_gcja5:
+        PM1_0:
+          { min: 0, max: 1200 }
+        PM2_5:
+          { min: 0, max: 1200 }
+        PM10:
+          { min: 0, max: 1200 }
+
 ```
 
 | parameter | sub-parameter | description | example value |
@@ -133,6 +150,9 @@ i2c:
 | | ic: | 24x00 series of eeprom chip name | '24c01' |
 | | slaveaddr: | address of eeprom chip in hex | 0x50 |
 | | writestrobe: | GPIO pin number used as CS (chip select) signal for eeprom IC | 26 |
+| sensor: ||part for setting particular sensors ||
+| | ms5637: | preasure min max | { min: 600, max: 1300 }|
+| | sn_gcja5: | air quality min max ||
 
 **Note: Currently only one eeprom chip could be added.**