-
Notifications
You must be signed in to change notification settings - Fork 0
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Merge pull request #15 from jsconan/release-0.5.0
Release 0.5.0
- Loading branch information
Showing
102 changed files
with
805 additions
and
503 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file was deleted.
Oops, something went wrong.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,3 @@ | ||
| /output | ||
| /dist | ||
| /config/config.ini |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,242 @@ | ||
| # generated by PrusaSlicer 2.2.0+ on 2020-04-10 at 09:30:48 UTC | ||
| avoid_crossing_perimeters = 0 | ||
| bed_custom_model = | ||
| bed_custom_texture = | ||
| bed_shape = 0x0,250x0,250x210,0x210 | ||
| bed_temperature = 60 | ||
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n | ||
| between_objects_gcode = | ||
| bottom_fill_pattern = rectilinear | ||
| bottom_solid_layers = 4 | ||
| bottom_solid_min_thickness = 0.5 | ||
| bridge_acceleration = 1000 | ||
| bridge_angle = 0 | ||
| bridge_fan_speed = 100 | ||
| bridge_flow_ratio = 0.95 | ||
| bridge_speed = 30 | ||
| brim_width = 0 | ||
| clip_multipart_objects = 1 | ||
| colorprint_heights = | ||
| compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4";"! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)" | ||
| complete_objects = 0 | ||
| cooling = 1 | ||
| cooling_tube_length = 5 | ||
| cooling_tube_retraction = 91.5 | ||
| default_acceleration = 1000 | ||
| default_filament_profile = "Prusament PLA" | ||
| default_print_profile = 0.15mm QUALITY @MK3 | ||
| deretract_speed = 0 | ||
| disable_fan_first_layers = 1 | ||
| dont_support_bridges = 1 | ||
| draft_shield = 0 | ||
| duplicate_distance = 6 | ||
| elefant_foot_compensation = 0.2 | ||
| end_filament_gcode = "; Filament-specific end gcode" | ||
| end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors | ||
| ensure_vertical_shell_thickness = 1 | ||
| external_perimeter_extrusion_width = 0.5 | ||
| external_perimeter_speed = 70 | ||
| external_perimeters_first = 0 | ||
| extra_loading_move = -2 | ||
| extra_perimeters = 1 | ||
| extruder_clearance_height = 20 | ||
| extruder_clearance_radius = 45 | ||
| extruder_colour = "" | ||
| extruder_offset = 0x0 | ||
| extrusion_axis = E | ||
| extrusion_multiplier = 1 | ||
| extrusion_width = 0.45 | ||
| fan_always_on = 1 | ||
| fan_below_layer_time = 100 | ||
| filament_colour = #FF8000 | ||
| filament_cooling_final_speed = 3.4 | ||
| filament_cooling_initial_speed = 2.2 | ||
| filament_cooling_moves = 4 | ||
| filament_cost = 24.99 | ||
| filament_density = 1.24 | ||
| filament_deretract_speed = nil | ||
| filament_diameter = 1.75 | ||
| filament_load_time = 0 | ||
| filament_loading_speed = 28 | ||
| filament_loading_speed_start = 3 | ||
| filament_max_volumetric_speed = 15 | ||
| filament_minimal_purge_on_wipe_tower = 15 | ||
| filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa" | ||
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | ||
| filament_retract_before_travel = nil | ||
| filament_retract_before_wipe = nil | ||
| filament_retract_layer_change = nil | ||
| filament_retract_length = nil | ||
| filament_retract_lift = nil | ||
| filament_retract_lift_above = nil | ||
| filament_retract_lift_below = nil | ||
| filament_retract_restart_extra = nil | ||
| filament_retract_speed = nil | ||
| filament_settings_id = "Prusament PLA" | ||
| filament_soluble = 0 | ||
| filament_toolchange_delay = 0 | ||
| filament_type = PLA | ||
| filament_unload_time = 0 | ||
| filament_unloading_speed = 90 | ||
| filament_unloading_speed_start = 100 | ||
| filament_vendor = Prusa Polymers | ||
| filament_wipe = nil | ||
| fill_angle = 45 | ||
| fill_density = 0% | ||
| fill_pattern = grid | ||
| first_layer_acceleration = 1000 | ||
| first_layer_bed_temperature = 60 | ||
| first_layer_extrusion_width = 0.42 | ||
| first_layer_height = 0.2 | ||
| first_layer_speed = 20 | ||
| first_layer_temperature = 215 | ||
| gap_fill_speed = 40 | ||
| gcode_comments = 0 | ||
| gcode_flavor = marlin | ||
| gcode_label_objects = 0 | ||
| high_current_on_filament_swap = 0 | ||
| host_type = octoprint | ||
| infill_acceleration = 1000 | ||
| infill_every_layers = 1 | ||
| infill_extruder = 1 | ||
| infill_extrusion_width = 0.45 | ||
| infill_first = 0 | ||
| infill_only_where_needed = 0 | ||
| infill_overlap = 25% | ||
| infill_speed = 200 | ||
| inherits_cummulative = "0.20mm SPEED @MK3";; | ||
| interface_shells = 0 | ||
| layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] | ||
| layer_height = 0.2 | ||
| machine_max_acceleration_e = 5000,5000 | ||
| machine_max_acceleration_extruding = 1250,1250 | ||
| machine_max_acceleration_retracting = 1250,1250 | ||
| machine_max_acceleration_x = 1000,960 | ||
| machine_max_acceleration_y = 1000,960 | ||
| machine_max_acceleration_z = 1000,1000 | ||
| machine_max_feedrate_e = 120,120 | ||
| machine_max_feedrate_x = 200,100 | ||
| machine_max_feedrate_y = 200,100 | ||
| machine_max_feedrate_z = 12,12 | ||
| machine_max_jerk_e = 4.5,4.5 | ||
| machine_max_jerk_x = 8,8 | ||
| machine_max_jerk_y = 8,8 | ||
| machine_max_jerk_z = 0.4,0.4 | ||
| machine_min_extruding_rate = 0,0 | ||
| machine_min_travel_rate = 0,0 | ||
| max_fan_speed = 100 | ||
| max_layer_height = 0.25 | ||
| max_print_height = 210 | ||
| max_print_speed = 200 | ||
| max_volumetric_speed = 0 | ||
| min_fan_speed = 100 | ||
| min_layer_height = 0.07 | ||
| min_print_speed = 15 | ||
| min_skirt_length = 4 | ||
| notes = | ||
| nozzle_diameter = 0.4 | ||
| only_retract_when_crossing_perimeters = 1 | ||
| ooze_prevention = 0 | ||
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode | ||
| overhangs = 0 | ||
| parking_pos_retraction = 92 | ||
| perimeter_acceleration = 800 | ||
| perimeter_extruder = 1 | ||
| perimeter_extrusion_width = 0.6 | ||
| perimeter_speed = 120 | ||
| perimeters = 2 | ||
| post_process = | ||
| print_host = | ||
| print_settings_id = 0.20mm FAST & EMPTY @MK3 | ||
| printer_model = MK3 | ||
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n | ||
| printer_settings_id = Original Prusa i3 MK3 | ||
| printer_technology = FFF | ||
| printer_variant = 0.4 | ||
| printer_vendor = | ||
| printhost_apikey = | ||
| printhost_cafile = | ||
| raft_layers = 0 | ||
| remaining_times = 1 | ||
| resolution = 0 | ||
| retract_before_travel = 1 | ||
| retract_before_wipe = 0% | ||
| retract_layer_change = 1 | ||
| retract_length = 0.8 | ||
| retract_length_toolchange = 4 | ||
| retract_lift = 0.6 | ||
| retract_lift_above = 0 | ||
| retract_lift_below = 209 | ||
| retract_restart_extra = 0 | ||
| retract_restart_extra_toolchange = 0 | ||
| retract_speed = 35 | ||
| seam_position = nearest | ||
| serial_port = | ||
| serial_speed = 250000 | ||
| silent_mode = 1 | ||
| single_extruder_multi_material = 0 | ||
| single_extruder_multi_material_priming = 0 | ||
| skirt_distance = 2 | ||
| skirt_height = 3 | ||
| skirts = 1 | ||
| slice_closing_radius = 0.049 | ||
| slowdown_below_layer_time = 20 | ||
| small_perimeter_speed = 50 | ||
| solid_infill_below_area = 0 | ||
| solid_infill_every_layers = 0 | ||
| solid_infill_extruder = 1 | ||
| solid_infill_extrusion_width = 0.45 | ||
| solid_infill_speed = 200 | ||
| spiral_vase = 0 | ||
| standby_temperature_delta = -5 | ||
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}18{else}30{endif} ; Filament gcode" | ||
| start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} | ||
| support_material = 0 | ||
| support_material_angle = 0 | ||
| support_material_auto = 1 | ||
| support_material_buildplate_only = 0 | ||
| support_material_contact_distance = 0.1 | ||
| support_material_enforce_layers = 0 | ||
| support_material_extruder = 0 | ||
| support_material_extrusion_width = 0.35 | ||
| support_material_interface_contact_loops = 0 | ||
| support_material_interface_extruder = 0 | ||
| support_material_interface_layers = 2 | ||
| support_material_interface_spacing = 0.2 | ||
| support_material_interface_speed = 100% | ||
| support_material_pattern = rectilinear | ||
| support_material_spacing = 2 | ||
| support_material_speed = 50 | ||
| support_material_synchronize_layers = 0 | ||
| support_material_threshold = 55 | ||
| support_material_with_sheath = 0 | ||
| support_material_xy_spacing = 50% | ||
| temperature = 215 | ||
| thin_walls = 1 | ||
| threads = 8 | ||
| thumbnails = | ||
| toolchange_gcode = | ||
| top_fill_pattern = rectilinear | ||
| top_infill_extrusion_width = 0.4 | ||
| top_solid_infill_speed = 50 | ||
| top_solid_layers = 5 | ||
| top_solid_min_thickness = 0.6 | ||
| travel_speed = 180 | ||
| use_firmware_retraction = 0 | ||
| use_relative_e_distances = 1 | ||
| use_volumetric_e = 0 | ||
| variable_layer_height = 1 | ||
| wipe = 1 | ||
| wipe_into_infill = 0 | ||
| wipe_into_objects = 0 | ||
| wipe_tower = 1 | ||
| wipe_tower_bridging = 10 | ||
| wipe_tower_no_sparse_layers = 0 | ||
| wipe_tower_rotation_angle = 0 | ||
| wipe_tower_width = 60 | ||
| wipe_tower_x = 170 | ||
| wipe_tower_y = 125 | ||
| wiping_volumes_extruders = 70,70 | ||
| wiping_volumes_matrix = 0 | ||
| xy_size_compensation = 0 | ||
| z_offset = 0 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Oops, something went wrong.