resources: various logs and uboot env dump for QNAP_TS419_family

resources/QNAP_TS419_family,uboot-env.legacy

@@ -0,0 +1,41 @@
+baudrate=115200
+loads_echo=0
+ipaddr=192.168.0.50
+serverip=192.168.0.1
+rootpath=/mnt/ARM_FS/
+netmask=255.255.255.0
+run_diag=yes
+console=console=ttyS0,115200
+CASset=min
+MALLOC_len=1
+ethprime=egiga0
+bootargs=console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=34816
+bootcmd=uart1 0x68;cp.l 0xf8200000 0x800000 0x80000;cp.l 0xf8400000 0xa00000 0x240000;bootm 0x800000
+ethaddr=00:08:9B:C3:07:2B
+ethmtu=1500
+usb0Mode=host
+netretry=no
+rcvrip=169.254.100.100
+loadaddr=0x02000000
+autoload=no
+ethact=egiga0
+stdin=serial
+stdout=serial
+stderr=serial
+mainlineLinux=no
+enaMonExt=no
+enaCpuStream=no
+enaWrAllo=no
+pexMode=RC
+disL2Cache=no
+setL2CacheWT=yes
+disL2Prefetch=yes
+enaICPref=yes
+enaDCPref=yes
+sata_dma_mode=yes
+netbsd_en=no
+bootdelay=1
+disaMvPnp=no
+enaAutoRecovery=yes
+pcieTune=no
+eth1addr=00:08:9B:C3:07:2C

resources/QNAP_TS419_family,uboot-env.new

@@ -0,0 +1,43 @@
+baudrate=115200
+loads_echo=0
+ipaddr=192.168.0.50
+serverip=192.168.0.1
+rootpath=/mnt/ARM_FS/
+netmask=255.255.255.0
+run_diag=yes
+console=console=ttyS0,115200
+CASset=min
+MALLOC_len=1
+ethprime=egiga0
+ethaddr=00:08:9B:C3:07:2B
+ethmtu=1500
+usb0Mode=host
+netretry=no
+rcvrip=169.254.100.100
+loadaddr=0x02000000
+autoload=no
+ethact=egiga0
+stdin=serial
+stdout=serial
+stderr=serial
+mainlineLinux=no
+enaMonExt=no
+enaCpuStream=no
+enaWrAllo=no
+pexMode=RC
+disL2Cache=no
+setL2CacheWT=yes
+disL2Prefetch=yes
+enaICPref=yes
+enaDCPref=yes
+sata_dma_mode=yes
+netbsd_en=no
+bootdelay=1
+disaMvPnp=no
+enaAutoRecovery=yes
+pcieTune=no
+eth1addr=00:08:9B:C3:07:2C
+bootargs_backup=console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=34816
+bootcmd_backup=uart1 0x68;cp.l 0xf8200000 0x800000 0x80000;cp.l 0xf8400000 0xa00000 0x240000;bootm 0x800000
+bootargs=console=ttyS0,115200 root=/dev/ram initrd=0xb00000,0xc00000 ramdisk=34816 cmdlinepart.mtdparts="spi0.0:512k@0(uboot)ro,3M@0x100000(Kernel),12M@0x400000(RootFS1),2M@0x200000(Kernel_legacy),256k@0x80000(U-Boot Config),256k@0xc0000(NAS Config)" mtdparts="spi0.0:512k@0(uboot)ro,3M@0x100000(Kernel),12M@0x400000(RootFS1),2M@0x200000(Kernel_legacy),256k@0x80000(U-Boot Config),256k@0xc0000(NAS Config)"
+bootcmd=uart1 0x68;cp.l 0xf8100000 0x800000 0xc0000;cp.l 0xf8400000 0xb00000 0x300000;bootm 0x800000

resources/QNAP_TS419_family_log.txt

@@ -0,0 +1,136 @@
+root@xxxxx:~# ./qnap_mtd_resize.py
+
+[Check of the QNAP model and see if supported]
+kirkwood-qnap: machine: QNAP TS419 family
+DTB file: kirkwood-ts419-6282.dtb
+Partition resize was not tested on this device yet. Do you wan't to continue ? (y/N)
+y
+In case of success, please report the DTB file indication.
+
+
+
+
+Checking: /sbin/flashcp -V
+Checking: /sbin/flash_erase --version
+Checking: /usr/bin/fw_setenv -v
+Compiled with U-Boot 2019.01+dfsg-7
+Checking: /usr/bin/fw_printenv -v
+Compiled with U-Boot 2019.01+dfsg-7
+
+[find on which MTD device partitions are currently mounted]
+   spi0.0
+
+[Dump current U-boot config']
+Current U-boot bootcmd:
+    uart1 0x68;cp.l 0xf8200000 0x800000 0x80000;cp.l 0xf8400000 0xa00000 0x240000;bootm 0x800000
+Current U-boot bootargs:
+    console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=34816
+
+[Prepare new 'bootcmd']
+   Old: uart1 0x68;cp.l 0xf8200000 0x800000 0x80000;cp.l 0xf8400000 0xa00000 0x240000;bootm 0x800000
+   New: uart1 0x68;cp.l 0xf8100000 0x800000 0xc0000;cp.l 0xf8400000 0xb00000 0x300000;bootm 0x800000
+
+[Prepare new 'bootargs']
+   Old: console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=34816
+   New: console=ttyS0,115200 root=/dev/ram initrd=0xb00000,0xc00000 ramdisk=34816 cmdlinepart.mtdparts="spi0.0:512k@0(uboot)ro,3M@0x100000(Kernel),12M@0x400000(RootFS1),2M@0x200000(Kernel_legacy),256k@0x80000(U-Boot Config),256k@0xc0000(NAS Config)" mtdparts="spi0.0:512k@0(uboot)ro,3M@0x100000(Kernel),12M@0x400000(RootFS1),2M@0x200000(Kernel_legacy),256k@0x80000(U-Boot Config),256k@0xc0000(NAS Config)"
+
+[Prepare fw_setenv script (/tmp/fw_setenv.script)]
+
+[Dump current 'NAS config' and 'Kernel' images]
++ cat /dev/mtd5
+[Resize 'NAS config' dump from 1280KB to 256KB.]
++ /usr/sbin/modprobe loop
++ /usr/sbin/losetup /dev/loop0 /tmp/mtd_nas_config.dump
++ /usr/sbin/e2fsck -p -v /dev/loop0
+/dev/loop0 was not cleanly unmounted, check forced.
+
+          18 inodes used (14.06%, out of 128)
+           2 non-contiguous files (11.1%)
+           0 non-contiguous directories (0.0%)
+             # of inodes with ind/dind/tind blocks: 0/0/0
+          54 blocks used (5.27%, out of 1024)
+           0 bad blocks
+           0 large files
+
+           7 regular files
+           2 directories
+           0 character device files
+           0 block device files
+           0 fifos
+           0 links
+           0 symbolic links (0 fast symbolic links)
+           0 sockets
+------------
+           9 files
++ true
++ /usr/sbin/e2fsck -p -v /dev/loop0
+/dev/loop0: clean, 18/128 files, 54/1024 blocks
++ /usr/sbin/resize2fs /dev/loop0 128
+resize2fs 1.44.5 (15-Dec-2018)
+Resizing the filesystem on /dev/loop0 to 128 (1k) blocks.
+The filesystem on /dev/loop0 is now 128 (1k) blocks long.
+
++ /usr/sbin/losetup -d /dev/loop0
+
+[Concatenate first 256K of 'NAS config' with first 1MB of Kernel > /tmp/mtd_nas_config.new]
+
+[Prepare second 1MB of kernel tail > /tmp/mtd_kernel.tail]
+------------------------------------------------------------
+    !!!! Warning !!!!
+
+    Everything is fine up to now.
+    Next steps will write the flash and may be subject to failures.
+
+    It is highly recommended to perform a MTD backup and save the files
+    somewhere (USB device, PC)
+
+        cat /dev/mtd0 > /tmp/mtd0.uboot.backup
+        cat /dev/mtd1 > /tmp/mtd1.kernel.backup
+        cat /dev/mtd2 > /tmp/mtd2.rootfs1.backup
+        cat /dev/mtd3 > /tmp/mtd3.rootfs2.backup
+        cat /dev/mtd4 > /tmp/mtd4.uboot-config.backup
+        cat /dev/mtd5 > /tmp/mtd5.nas-config.backup
+        /usr/bin/fw_printenv -c /tmp/fw_env.config  > /tmp/uboot_config.backup.txt
+        cd /tmp
+        tar cvzf mtd_backup.tgz mtd?.*.backup uboot_config.backup.txt
+
+        # now use scp / sftp to push/pull mtd_backup.tgz on another PC.
+
+    Be sure you will not cut the power until the end of operations.
+    In case of failure, you way need to recover with a Serial Console 
+    to run U-boot commands
+
+        https://www.cyrius.com/debian/kirkwood/qnap/ts-219/serial/
+
+Continue and flash the new partitions ? (y/N)
+y
+
+[Flash 'NAS config' partition content (ie 'NAS config' + head of Kernel) (still a 'safe' op)]
++ /sbin/flashcp -v /tmp/mtd_nas_config.new /dev/mtd5
+Erasing blocks: 5/5 (100%)
+Writing data: 1280k/1280k (100%)
+Verifying data: 1280k/1280k (100%)
+
+[Change U-boot config with new values)]
++ /usr/bin/fw_setenv -c /tmp/fw_env.config -s /tmp/fw_setenv.script
+
+[Flash tail of the kernel in old 'Kernel' Partition]
++ /sbin/flashcp -v /tmp/mtd_kernel.tail /dev/mtd1
+Erasing blocks: 4/4 (100%)
+Writing data: 1024k/1024k (100%)
+Verifying data: 1024k/1024k (100%)
+------------------------------------------------------------
+
+    SUCCESS. You can reboot now.
+
+    Notes: 
+    - Don't perform kernel or system update before the next reboot... 
+      so don't wait too long.
+    - Consider compressing initrd with 'xz' to optimize the size with:
+
+        echo "COMPRESS=xz" > /etc/initramfs-tools/conf.d/compress
+
+
+root@xxx:~# 
+
+