WiFi Access Point

By default WiFi is disabled in Bubbagen to avoid conflicts on non-WiFi boxes. You therefore require a network cable to reach the B3 when you start the Live-USB the first time. Please make sure that you attach that cable to the LAN marked Ethernet port before the B3 is powered on. Failure to do so may cause the network address to be wrong for your network (if connected to an existing network) or services on the B3 not starting correctly (systemd version).

Once the B3 is booted completely and the led on the front is either colored green (Live-USB) or blue (running from internal disk) point your web browser to http://b3 to find the familiar web frontend. To be able to activate the WiFi adapter you must first set a fixed address on the LAN interface. You can then activate the WiFi AP and disconnect the Ethernet cable if you like.