Commands

Note: All commands are CaseSensitive.

Commands to use with kw1281test:

• ActuatorTest

• AdaptationRead CHANNEL [LOGIN]

  • CHANNEL = Channel number (0-99)
  • LOGIN = Optional login (0-65535)

• AdaptationSave CHANNEL VALUE [LOGIN]

  • CHANNEL = Channel number (0-99)
  • VALUE = Channel value (0-65535)
  • LOGIN = Optional login (0-65535)

• AdaptationTest CHANNEL VALUE [LOGIN]

  • CHANNEL = Channel number (0-99)
  • VALUE = Channel value (0-65535)
  • LOGIN = Optional login (0-65535)

• BasicSetting GROUP

  • GROUP = Group number (0-255)
  • (Group 0: Raw controller data)

• ClarionVWPremium4SafeCode

• ClearFaultCodes

• DelcoVWPremium5SafeCode

• DumpEdc15Eeprom [FILENAME]

  • FILENAME = Optional filename

• DumpEeprom START LENGTH [FILENAME]

  • START = Start address in decimal (e.g. 0) or hex (e.g. $0)
  • LENGTH = Number of bytes in decimal (e.g. 2048) or hex (e.g. $800)
  • FILENAME = Optional filename

• DumpMarelliMem START LENGTH [FILENAME]

  • START = Start address in decimal (e.g. 3072) or hex (e.g. $C00)
  • LENGTH = Number of bytes in decimal (e.g. 1024) or hex (e.g. $400)
  • FILENAME = Optional filename

• DumpMem START LENGTH [FILENAME]

  • START = Start address in decimal (e.g. 8192) or hex (e.g. $2000)
  • LENGTH = Number of bytes in decimal (e.g. 65536) or hex (e.g. $10000)
  • FILENAME = Optional filename

• DumpRBxMem START LENGTH [FILENAME]

  • START = Start address in decimal (e.g. 66560) or hex (e.g. $10400)
  • LENGTH = Number of bytes in decimal (e.g. 1024) or hex (e.g. $400)
  • FILENAME = Optional filename

• FindLogins LOGIN

  • LOGIN = Known good login (0-65535)

• GetSKC

• GroupRead GROUP

  • GROUP = Group number (0-255)
  • (Group 0: Raw controller data)

• LoadEeprom START FILENAME

  • START = Start address in decimal (e.g. 0) or hex (e.g. $0)
  • FILENAME = Name of file containing binary data to load into EEPROM

• MapEeprom

• ReadFaultCodes

• ReadIdent

• ReadEeprom ADDRESS

  • ADDRESS = Address in decimal (e.g. 4361) or hex (e.g. $1109)

• ReadRAM ADDRESS

  • ADDRESS = Address in decimal (e.g. 4361) or hex (e.g. $1109)

• ReadROM ADDRESS

  • ADDRESS = Address in decimal (e.g. 4361) or hex (e.g. $1109)

• ReadSoftwareVersion

• Reset

• SetSoftwareCoding CODING WORKSHOP

  • CODING = Software coding in decimal (e.g. 4361) or hex (e.g. $1109)
  • WORKSHOP = Workshop code in decimal (e.g. 4361) or hex (e.g. $1109)

• ToggleRB4Mode

• WriteEeprom ADDRESS VALUE

  • ADDRESS = Address in decimal (e.g. 4361) or hex (e.g. $1109)
  • VALUE = Value in decimal (e.g. 138) or hex (e.g. $8A)