Skip to content

[CLOB-184] - e2e short term order replacement tests (#491) #645

[CLOB-184] - e2e short term order replacement tests (#491)

[CLOB-184] - e2e short term order replacement tests (#491) #645

Triggered via push October 25, 2023 17:55
Status Success
Total duration 13m 23s
Artifacts
This run and associated checks have been archived and are scheduled for deletion. Learn more about checks retention
(Dev) Build and Push ECS Services  /  ...  /  (ender) Build and Push
7m 8s
(Dev) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
(Dev) Build and Push ECS Services  /  ...  /  (comlink) Build and Push
5m 35s
(Dev) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
(Dev) Build and Push ECS Services  /  ...  /  (socks) Build and Push
6m 30s
(Dev) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
(Dev) Build and Push ECS Services  /  ...  /  (roundtable) Build and Push
5m 1s
(Dev) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
(Dev) Build and Push ECS Services  /  ...  /  (vulcan) Build and Push
6m 52s
(Dev) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
(Dev) Build and Push ECS Services  /  ...  /  (bazooka) Build and Push Lambda
9m 3s
(Dev) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
(Dev) Build and Push ECS Services  /  ...  /  (auxo) Build and Push Lambda
7m 32s
(Dev) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
(Dev2) Build and Push ECS Services  /  ...  /  (ender) Build and Push
5m 45s
(Dev2) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
(Dev2) Build and Push ECS Services  /  ...  /  (comlink) Build and Push
5m 57s
(Dev2) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
(Dev2) Build and Push ECS Services  /  ...  /  (socks) Build and Push
6m 53s
(Dev2) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
(Dev2) Build and Push ECS Services  /  ...  /  (roundtable) Build and Push
5m 3s
(Dev2) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
(Dev2) Build and Push ECS Services  /  ...  /  (vulcan) Build and Push
7m 48s
(Dev2) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
(Dev2) Build and Push ECS Services  /  ...  /  (bazooka) Build and Push Lambda
6m 27s
(Dev2) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
(Dev2) Build and Push ECS Services  /  ...  /  (auxo) Build and Push Lambda
7m 8s
(Dev2) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
(Dev3) Build and Push ECS Services  /  ...  /  (ender) Build and Push
6m 4s
(Dev3) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
(Dev3) Build and Push ECS Services  /  ...  /  (comlink) Build and Push
6m 47s
(Dev3) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
(Dev3) Build and Push ECS Services  /  ...  /  (socks) Build and Push
5m 0s
(Dev3) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
(Dev3) Build and Push ECS Services  /  ...  /  (roundtable) Build and Push
6m 7s
(Dev3) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
(Dev3) Build and Push ECS Services  /  ...  /  (vulcan) Build and Push
6m 44s
(Dev3) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
(Dev3) Build and Push ECS Services  /  ...  /  (bazooka) Build and Push Lambda
7m 49s
(Dev3) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
(Dev3) Build and Push ECS Services  /  ...  /  (auxo) Build and Push Lambda
7m 32s
(Dev3) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
(Dev4) Build and Push ECS Services  /  ...  /  (ender) Build and Push
6m 8s
(Dev4) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
(Dev4) Build and Push ECS Services  /  ...  /  (comlink) Build and Push
5m 46s
(Dev4) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
(Dev4) Build and Push ECS Services  /  ...  /  (socks) Build and Push
6m 37s
(Dev4) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
(Dev4) Build and Push ECS Services  /  ...  /  (roundtable) Build and Push
6m 13s
(Dev4) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
(Dev4) Build and Push ECS Services  /  ...  /  (vulcan) Build and Push
6m 1s
(Dev4) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
(Dev4) Build and Push ECS Services  /  ...  /  (bazooka) Build and Push Lambda
8m 56s
(Dev4) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
(Dev4) Build and Push ECS Services  /  ...  /  (auxo) Build and Push Lambda
5m 31s
(Dev4) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
(Dev5) Build and Push ECS Services  /  ...  /  (ender) Build and Push
6m 33s
(Dev5) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
(Dev5) Build and Push ECS Services  /  ...  /  (comlink) Build and Push
5m 15s
(Dev5) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
(Dev5) Build and Push ECS Services  /  ...  /  (socks) Build and Push
5m 14s
(Dev5) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
(Dev5) Build and Push ECS Services  /  ...  /  (roundtable) Build and Push
5m 36s
(Dev5) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
(Dev5) Build and Push ECS Services  /  ...  /  (vulcan) Build and Push
6m 27s
(Dev5) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
(Dev5) Build and Push ECS Services  /  ...  /  (bazooka) Build and Push Lambda
7m 53s
(Dev5) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
(Dev5) Build and Push ECS Services  /  ...  /  (auxo) Build and Push Lambda
7m 0s
(Dev5) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
(Staging) Build and Push ECS Services  /  ...  /  (ender) Build and Push
6m 51s
(Staging) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
(Staging) Build and Push ECS Services  /  ...  /  (comlink) Build and Push
6m 19s
(Staging) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
(Staging) Build and Push ECS Services  /  ...  /  (socks) Build and Push
5m 8s
(Staging) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
(Staging) Build and Push ECS Services  /  ...  /  (roundtable) Build and Push
7m 8s
(Staging) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
(Staging) Build and Push ECS Services  /  ...  /  (vulcan) Build and Push
6m 12s
(Staging) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
(Staging) Build and Push ECS Services  /  ...  /  (bazooka) Build and Push Lambda
6m 14s
(Staging) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
(Staging) Build and Push ECS Services  /  ...  /  (auxo) Build and Push Lambda
6m 33s
(Staging) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
Fit to window
Zoom out
Zoom in

Annotations

126 warnings
(Dev) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev2) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev2) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev4) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev4) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev2) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev2) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev4) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev4) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev2) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev2) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev4) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev4) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev4) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev4) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev4) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev4) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev2) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev2) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev4) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev4) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev2) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev2) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev5) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev5) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev5) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev5) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev2) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev2) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev2) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev2) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev5) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev5) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev5) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev5) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev4) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev4) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev5) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev5) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev3) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev3) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Staging) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Staging) Build and Push ECS Services / call-build-and-push-ecs-service-socks / (socks) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev5) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev5) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev3) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev3) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev5) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev5) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev3) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev3) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev3) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev3) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Staging) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Staging) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Staging) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Staging) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Staging) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Staging) Build and Push ECS Services / call-build-and-push-ecs-service-comlink / (comlink) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Staging) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Staging) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev3) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev3) Build and Push ECS Services / call-build-and-push-vulcan / (vulcan) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Staging) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Staging) Build and Push ECS Services / call-build-and-push-ecs-service-ender / (ender) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev3) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev3) Build and Push ECS Services / call-build-and-push-auxo-lambda / (auxo) Build and Push Lambda
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Dev3) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Dev3) Build and Push ECS Services / call-build-and-push-bazooka-lambda / (bazooka) Build and Push Lambda
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
(Staging) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
The following actions uses node12 which is deprecated and will be forced to run on node16: aws-actions/configure-aws-credentials@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
(Staging) Build and Push ECS Services / call-build-and-push-ecs-service-roundtable / (roundtable) Build and Push
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/