- DES R2-4 standard and lateral (inner column) compatibility for lofree/choc v2 and mx switches
- Note: NOT compatible with Gateron KS-33 switches
- decreased keycap height as much as possible
- added fdm parameter: option to chamfer bottom edges for better bed adhesion
- added slicer settings for printing in PLA
- changed homeDot parameter from homing dots to a homing bar
Some of these changes were made for fdm printing. The uploaded stl's contain chamfers. If you want to print using a different method, be sure to change the tolerance values, remove the chamfers, add sprues, etc.
- to Pseudoku for creating and sharing all of his keycaps and for assisting with debugging.
- to zzeneg for sharing the low profile modifications and for checking ks33 compatibility.
- to wolfwood for sharing the chamfering technique and print setting suggestions.
- to levpopov for the print setting suggestions.
- low profile version - short skirt, bit tighter stems, tested in MJF Nylon (JLCPCB) with KS-33 switches (Gateron Low Profile), probably compatible with other low profiles
- minY version - minimal vertical spacing (19x16mm), tested in MJF Nylon with KS-33 and regular MX switches
- scripts to generate CS, DES, and Liminal Chimera keycaps
- sprued stls packs for MJF/SLS printing
- adding 1.25 to 2.25u Choc CS regular and convex caps
- make sure OpenSCAD is up to date.
- unzip libraries.zip into your OpenSCAD libraries
- select keycap you want to render by changing KeyID value
- change KeyID to corresponding Parameter ID
- press F5 to review
- press F6 to render
- press F7 to export as STL
#Some notes on ## Distorted Ellipsoidal Saddle (DES) High sculpt smooth transition profile
Subtly sculpted choc spaced low profile
Additional sculpt angle and smoother transitions
Minimal spacing
Under construction