Merge android13-5.10 into android13-gs-pixel-5.10-gs101

Bug: 195932551
Bug: 196974386
Signed-off-by: Robin Peng <[email protected]>
Change-Id: I63aacfe7a9925d23a2a872ab994077a71dd66caa

BUILD.bazel

@@ -0,0 +1,17 @@
+# Copyright (C) 2021 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+load("//build/kleaf:common_kernels.bzl", "define_common_kernels")
+
+define_common_kernels()

Documentation/ABI/testing/configfs-usb-gadget-uac2

@@ -8,6 +8,8 @@ Description:
 		c_chmask   capture channel mask
 		c_srate    capture sampling rate
 		c_ssize    capture sample size (bytes)
+		c_sync     capture synchronization type (async/adaptive)
+		fb_max     maximum extra bandwidth in async mode
 		p_chmask   playback channel mask
 		p_srate    playback sampling rate
 		p_ssize    playback sample size (bytes)

Documentation/ABI/testing/evm

@@ -49,8 +49,30 @@ Description:
 		modification of EVM-protected metadata and
 		disable all further modification of policy
 
-		Note that once a key has been loaded, it will no longer be
-		possible to enable metadata modification.
+		Echoing a value is additive, the new value is added to the
+		existing initialization flags.
+
+		For example, after::
+
+		  echo 2 ><securityfs>/evm
+
+		another echo can be performed::
+
+		  echo 1 ><securityfs>/evm
+
+		and the resulting value will be 3.
+
+		Note that once an HMAC key has been loaded, it will no longer
+		be possible to enable metadata modification. Signaling that an
+		HMAC key has been loaded will clear the corresponding flag.
+		For example, if the current value is 6 (2 and 4 set)::
+
+		  echo 1 ><securityfs>/evm
+
+		will set the new value to 3 (4 cleared).
+
+		Loading an HMAC key is the only way to disable metadata
+		modification.
 
 		Until key loading has been signaled EVM can not create
 		or validate the 'security.evm' xattr, but returns

Documentation/ABI/testing/sysfs-bus-papr-pmem

@@ -39,9 +39,11 @@ KernelVersion:	v5.9
 Contact:	linuxppc-dev <[email protected]>, [email protected],
 Description:
 		(RO) Report various performance stats related to papr-scm NVDIMM
-		device.  Each stat is reported on a new line with each line
-		composed of a stat-identifier followed by it value. Below are
-		currently known dimm performance stats which are reported:
+		device. This attribute is only available for NVDIMM devices
+		that support reporting NVDIMM performance stats. Each stat is
+		reported on a new line with each line composed of a
+		stat-identifier followed by it value. Below are currently known
+		dimm performance stats which are reported:
 
 		* "CtlResCt" : Controller Reset Count
 		* "CtlResTm" : Controller Reset Elapsed Time

Documentation/admin-guide/kernel-parameters.txt

@@ -605,6 +605,12 @@
 			loops can be debugged more effectively on production
 			systems.
 
+	clocksource.max_cswd_read_retries= [KNL]
+			Number of clocksource_watchdog() retries due to
+			external delays before the clock will be marked
+			unstable.  Defaults to three retries, that is,
+			four attempts to read the clock under test.
+
 	clearcpuid=BITNUM[,BITNUM...] [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit
@@ -2306,8 +2312,7 @@
 				   state is kept private from the host.
 				   Not valid if the kernel is running in EL2.
 
-			Defaults to VHE/nVHE based on hardware support and
-			the value of CONFIG_ARM64_VHE.
+			Defaults to VHE/nVHE based on hardware support.
 
 	kvm-arm.vgic_v3_group0_trap=
 			[KVM,ARM] Trap guest accesses to GICv3 group-0

Documentation/arm64/tagged-address-abi.rst

@@ -45,14 +45,24 @@ how the user addresses are used by the kernel:
 
 1. User addresses not accessed by the kernel but used for address space
    management (e.g. ``mprotect()``, ``madvise()``). The use of valid
-   tagged pointers in this context is allowed with the exception of
-   ``brk()``, ``mmap()`` and the ``new_address`` argument to
-   ``mremap()`` as these have the potential to alias with existing
-   user addresses.
-
-   NOTE: This behaviour changed in v5.6 and so some earlier kernels may
-   incorrectly accept valid tagged pointers for the ``brk()``,
-   ``mmap()`` and ``mremap()`` system calls.
+   tagged pointers in this context is allowed with these exceptions:
+
+   - ``brk()``, ``mmap()`` and the ``new_address`` argument to
+     ``mremap()`` as these have the potential to alias with existing
+      user addresses.
+
+     NOTE: This behaviour changed in v5.6 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for the ``brk()``,
+     ``mmap()`` and ``mremap()`` system calls.
+
+   - The ``range.start``, ``start`` and ``dst`` arguments to the
+     ``UFFDIO_*`` ``ioctl()``s used on a file descriptor obtained from
+     ``userfaultfd()``, as fault addresses subsequently obtained by reading
+     the file descriptor will be untagged, which may otherwise confuse
+     tag-unaware programs.
+
+     NOTE: This behaviour changed in v5.14 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for this system call.
 
 2. User addresses accessed by the kernel (e.g. ``write()``). This ABI
    relaxation is disabled by default and the application thread needs to

Documentation/devicetree/bindings/connector/usb-connector.yaml

@@ -93,6 +93,28 @@ properties:
       - device
       - dual
 
+  typec-power-opmode:
+    description: Determines the power operation mode that the Type C connector
+      will support and will advertise through CC pins when it has no power
+      delivery support.
+      - "default" corresponds to default USB voltage and current defined by the
+        USB 2.0 and USB 3.2 specifications, 5V 500mA for USB 2.0 ports and
+        5V 900mA or 1500mA for USB 3.2 ports in single-lane or dual-lane
+        operation respectively.
+      - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB
+        Type-C Cable and Connector specification, when Power Delivery is not
+        supported.
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/string
+    enum:
+      - default
+      - 1.5A
+      - 3.0A
+
+  pd-disable:
+    description: Set this property if the Type-C connector has no power delivery support.
+    type: boolean
+
   # The following are optional properties for "usb-c-connector" with power
   # delivery support.
   source-pdos:
@@ -229,6 +251,12 @@ allOf:
         type:
           const: micro
 
+anyOf:
+  - not:
+      required:
+        - typec-power-opmode
+        - new-source-frs-typec-current
+
 additionalProperties: true
 
 examples:

Documentation/devicetree/bindings/i2c/i2c-at91.txt

@@ -73,7 +73,7 @@ i2c0: i2c@f8034600 {
 	pinctrl-0 = <&pinctrl_i2c0>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
 	sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	wm8731: wm8731@1a {
 		compatible = "wm8731";

Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt

@@ -51,6 +51,23 @@ compatible (optional) - standard definition
           used as a shared pool of DMA buffers for a set of devices. It can
           be used by an operating system to instantiate the necessary pool
           management subsystem if necessary.
+        - restricted-dma-pool: This indicates a region of memory meant to be
+          used as a pool of restricted DMA buffers for a set of devices. The
+          memory region would be the only region accessible to those devices.
+          When using this, the no-map and reusable properties must not be set,
+          so the operating system can create a virtual mapping that will be used
+          for synchronization. The main purpose for restricted DMA is to
+          mitigate the lack of DMA access control on systems without an IOMMU,
+          which could result in the DMA accessing the system memory at
+          unexpected times and/or unexpected addresses, possibly leading to data
+          leakage or corruption. The feature on its own provides a basic level
+          of protection against the DMA overwriting buffer contents at
+          unexpected times. However, to protect against general data leakage and
+          system memory corruption, the system needs to provide way to lock down
+          the memory access, e.g., MPU. Note that since coherent allocation
+          needs remapping, one must set up another device coherent pool by
+          shared-dma-pool and use dma_alloc_from_dev_coherent instead for atomic
+          coherent allocation.
         - vendor specific string in the form <vendor>,[<device>-]<usage>
 no-map (optional) - empty property
     - Indicates the operating system must not create a virtual mapping
@@ -85,10 +102,11 @@ memory-region-names (optional) - a list of names, one for each corresponding
 
 Example
 -------
-This example defines 3 contiguous regions are defined for Linux kernel:
+This example defines 4 contiguous regions for Linux kernel:
 one default of all device drivers (named linux,cma@72000000 and 64MiB in size),
-one dedicated to the framebuffer device (named framebuffer@78000000, 8MiB), and
-one for multimedia processing (named multimedia-memory@77000000, 64MiB).
+one dedicated to the framebuffer device (named framebuffer@78000000, 8MiB),
+one for multimedia processing (named multimedia-memory@77000000, 64MiB), and
+one for restricted dma pool (named restricted_dma_reserved@0x50000000, 64MiB).
 
 / {
 	#address-cells = <1>;
@@ -120,6 +138,11 @@ one for multimedia processing (named multimedia-memory@77000000, 64MiB).
 			compatible = "acme,multimedia-memory";
 			reg = <0x77000000 0x4000000>;
 		};
+
+		restricted_dma_reserved: restricted_dma_reserved {
+			compatible = "restricted-dma-pool";
+			reg = <0x50000000 0x4000000>;
+		};
 	};
 
 	/* ... */
@@ -138,4 +161,11 @@ one for multimedia processing (named multimedia-memory@77000000, 64MiB).
 		memory-region = <&multimedia_reserved>;
 		/* ... */
 	};
+
+	pcie_device: pcie_device@0,0 {
+		reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
+		       0x83010000 0x0 0x00100000 0x0 0x00100000>;
+		memory-region = <&restricted_dma_reserved>;
+		/* ... */
+	};
 };

Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml

@@ -24,9 +24,9 @@ allOf:
 select:
   properties:
     compatible:
-      items:
-        - enum:
-            - sifive,fu540-c000-ccache
+      contains:
+        enum:
+          - sifive,fu540-c000-ccache
 
   required:
     - compatible

Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml

@@ -57,7 +57,7 @@ patternProperties:
           rate
 
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle
+        $ref: /schemas/types.yaml#/definitions/phandle-array
         description: phandle of the CPU DAI
 
     patternProperties:
@@ -71,7 +71,7 @@ patternProperties:
 
         properties:
           sound-dai:
-            $ref: /schemas/types.yaml#/definitions/phandle
+            $ref: /schemas/types.yaml#/definitions/phandle-array
             description: phandle of the codec DAI
 
         required:

Documentation/driver-api/early-userspace/early_userspace_support.rst

@@ -69,17 +69,17 @@ early userspace image can be built by an unprivileged user.
 
 As a technical note, when directories and files are specified, the
 entire CONFIG_INITRAMFS_SOURCE is passed to
-usr/gen_initramfs_list.sh.  This means that CONFIG_INITRAMFS_SOURCE
+usr/gen_initramfs.sh.  This means that CONFIG_INITRAMFS_SOURCE
 can really be interpreted as any legal argument to
-gen_initramfs_list.sh.  If a directory is specified as an argument then
+gen_initramfs.sh.  If a directory is specified as an argument then
 the contents are scanned, uid/gid translation is performed, and
 usr/gen_init_cpio file directives are output.  If a directory is
-specified as an argument to usr/gen_initramfs_list.sh then the
+specified as an argument to usr/gen_initramfs.sh then the
 contents of the file are simply copied to the output.  All of the output
 directives from directory scanning and file contents copying are
 processed by usr/gen_init_cpio.
 
-See also 'usr/gen_initramfs_list.sh -h'.
+See also 'usr/gen_initramfs.sh -h'.
 
 Where's this all leading?
 =========================

Documentation/filesystems/ramfs-rootfs-initramfs.rst

@@ -170,7 +170,7 @@ Documentation/driver-api/early-userspace/early_userspace_support.rst for more de
 The kernel does not depend on external cpio tools.  If you specify a
 directory instead of a configuration file, the kernel's build infrastructure
 creates a configuration file from that directory (usr/Makefile calls
-usr/gen_initramfs_list.sh), and proceeds to package up that directory
+usr/gen_initramfs.sh), and proceeds to package up that directory
 using the config file (by feeding it to usr/gen_init_cpio, which is created
 from usr/gen_init_cpio.c).  The kernel's build-time cpio creation code is
 entirely self-contained, and the kernel's boot-time extractor is also

Documentation/hwmon/max31790.rst

@@ -38,6 +38,7 @@ Sysfs entries
 fan[1-12]_input    RO  fan tachometer speed in RPM
 fan[1-12]_fault    RO  fan experienced fault
 fan[1-6]_target    RW  desired fan speed in RPM
-pwm[1-6]_enable    RW  regulator mode, 0=disabled, 1=manual mode, 2=rpm mode
-pwm[1-6]           RW  fan target duty cycle (0-255)
+pwm[1-6]_enable    RW  regulator mode, 0=disabled (duty cycle=0%), 1=manual mode, 2=rpm mode
+pwm[1-6]           RW  read: current pwm duty cycle,
+                       write: target pwm duty cycle (0-255)
 ================== === =======================================================

Documentation/networking/ip-sysctl.rst

@@ -751,7 +751,7 @@ tcp_fastopen_blackhole_timeout_sec - INTEGER
 	initial value when the blackhole issue goes away.
 	0 to disable the blackhole detection.
 
-	By default, it is set to 1hr.
+	By default, it is set to 0 (feature is disabled).
 
 tcp_fastopen_key - list of comma separated 32-digit hexadecimal INTEGERs
 	The list consists of a primary key and an optional backup key. The

Documentation/trace/histogram.rst

@@ -191,7 +191,7 @@ Documentation written by Tom Zanussi
                                 with the event, in nanoseconds.  May be
 			        modified by .usecs to have timestamps
 			        interpreted as microseconds.
-    cpu                    int  the cpu on which the event occurred.
+    common_cpu             int  the cpu on which the event occurred.
     ====================== ==== =======================================
 
 Extended error information

Documentation/usb/gadget-testing.rst

@@ -728,6 +728,8 @@ The uac2 function provides these attributes in its function directory:
 	c_chmask	capture channel mask
 	c_srate		capture sampling rate
 	c_ssize		capture sample size (bytes)
+	c_sync		capture synchronization type (async/adaptive)
+	fb_max          maximum extra bandwidth in async mode
 	p_chmask	playback channel mask
 	p_srate		playback sampling rate
 	p_ssize		playback sample size (bytes)

Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst

@@ -4161,7 +4161,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
     :stub-columns: 0
     :widths:       1 1 2
 
-    * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT``
+    * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED``
       - 0x00000001
       -
     * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT``
@@ -4369,6 +4369,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
     * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED``
       - 0x00000100
       -
+    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT``
+      - 0x00000200
+      -
 
 .. c:type:: v4l2_hevc_dpb_entry