DirectrixDerivedReferenceSweptAreaSolid-1

DirectrixDerivedReferenceSweptAreaSolid-1/DirectrixDerivedReferenceSweptAreaSolid-1.ifc

@@ -0,0 +1,139 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (('ViewDefinition [Ifc4X3NotAssigned]'), '2;1');
+FILE_NAME ('DirectrixDerivedReferenceSweptAreaSolid-1.ifc', '2021-06-29T15:54:08', (), (), 'ACCA_IFC.dll Version 500', 'ACCA IfcRailGenerator', $);
+FILE_SCHEMA (('IFC4X3_RC4'));
+ENDSEC;
+DATA;
+#1 = IFCOWNERHISTORY(#2, #6, $, .NOCHANGE., $, $, $, 1624982048);
+#2 = IFCPERSONANDORGANIZATION(#3, #4, $);
+#3 = IFCPERSON($, 'D\X2\0027\X0\Urso', 'Alfonso', $, $, $, $, $);
+#4 = IFCORGANIZATION($, 'ACCA software', $, $, $);
+#5 = IFCORGANIZATION($, 'ACCA software', $, $, $);
+#6 = IFCAPPLICATION(#5, '100', 'ACCA IfcRailGenerator', 'ACCA IfcRailGenerator');
+#7 = IFCPROJECT('3Vq$iAROT0eO$GFKXsFt6$', #1, 'Test IFC Project', $, $, $, $, (#13), #8);
+#8 = IFCUNITASSIGNMENT((#9, #10, #11, #12));
+#9 = IFCSIUNIT(*, .LENGTHUNIT., $, .METRE.);
+#10 = IFCSIUNIT(*, .AREAUNIT., $, .SQUARE_METRE.);
+#11 = IFCSIUNIT(*, .VOLUMEUNIT., $, .CUBIC_METRE.);
+#12 = IFCSIUNIT(*, .PLANEANGLEUNIT., $, .RADIAN.);
+#13 = IFCGEOMETRICREPRESENTATIONCONTEXT($, 'Model', 3, 1.E-4, #14, #16);
+#14 = IFCAXIS2PLACEMENT3D(#15, $, $);
+#15 = IFCCARTESIANPOINT((0., 0., 0.));
+#16 = IFCDIRECTION((0., 1.));
+#17 = IFCGEOMETRICREPRESENTATIONSUBCONTEXT('Body', 'Model', *, *, *, *, #13, $, .MODEL_VIEW., $);
+#18 = IFCARBITRARYCLOSEDPROFILEDEF(.AREA., 'Simple Profile', #19);
+#19 = IFCINDEXEDPOLYCURVE(#20, (IFCLINEINDEX((1, 2)), IFCLINEINDEX((2, 3)), IFCLINEINDEX((3, 4)), IFCLINEINDEX((4, 1))), $);
+#20 = IFCCARTESIANPOINTLIST2D(((-4., 0.), (-5., -1.), (5., -1.), (4., 0.)), $);
+#21 = IFCARBITRARYCLOSEDPROFILEDEF(.AREA., 'Simple Profile Smaller', #22);
+#22 = IFCINDEXEDPOLYCURVE(#23, (IFCLINEINDEX((1, 2)), IFCLINEINDEX((2, 3)), IFCLINEINDEX((3, 4)), IFCLINEINDEX((4, 1))), $);
+#23 = IFCCARTESIANPOINTLIST2D(((-1., 0.), (-2., -1.), (2., -1.), (1., 0.)), $);
+#24 = IFCSITE('1IJ7WsQirBIhXKVinOvCnh', #1, 'Default Site', $, $, #25, $, $, .ELEMENT., (0, 0, 0), (0, 0, 0), 0., $, $);
+#25 = IFCLOCALPLACEMENT($, #28);
+#26 = IFCDIRECTION((0., 0., 1.));
+#27 = IFCDIRECTION((1., 0., 0.));
+#28 = IFCAXIS2PLACEMENT3D(#15, #26, #27);
+#29 = IFCALIGNMENT('3x3Lwqt4bFAQR4qwhDFynb', #1, 'Test Alignment', $, $, #30, #111, $);
+#30 = IFCLOCALPLACEMENT(#25, #33);
+#31 = IFCDIRECTION((0., 0., 1.));
+#32 = IFCDIRECTION((1., 0., 0.));
+#33 = IFCAXIS2PLACEMENT3D(#15, #31, #32);
+#34 = IFCALIGNMENTHORIZONTAL('3RkUzkvanFh8GmD9Nz6hw1', #1, $, $, $, $, $);
+#35 = IFCALIGNMENTSEGMENT('0s9nv2f4fC_fMru9NdHjYq', #1, $, $, $, $, $, #36);
+#36 = IFCALIGNMENTHORIZONTALSEGMENT($, $, #37, 0., 0., 0., 400., $, .LINE.);
+#37 = IFCCARTESIANPOINT((0., 0.));
+#38 = IFCALIGNMENTSEGMENT('0CJ0a2mKv7Tx5uhTXV2pYN', #1, $, $, $, $, $, #39);
+#39 = IFCALIGNMENTHORIZONTALSEGMENT($, $, #40, 0., 0., -500.000000000002, 150., $, .CLOTHOID.);
+#40 = IFCCARTESIANPOINT((400., 0.));
+#41 = IFCALIGNMENTSEGMENT('2pwfTEmmn40ApNfl9KmOTG', #1, $, $, $, $, $, #42);
+#42 = IFCALIGNMENTHORIZONTALSEGMENT($, $, #43, 6.13318530717958, -500.000000000002, -500.000000000002, 400., $, .CIRCULARARC.);
+#43 = IFCCARTESIANPOINT((549.662851380011, -7.48795505445));
+#44 = IFCRELNESTS('0biedlTdP5yREgRdU$AEiI', #1, 'Linear Element Nesting', $, #34, (#35, #38, #41));
+#45 = IFCALIGNMENTVERTICAL('2JhvlAVLD5yhQip$dgdIMC', #1, $, $, $, $, $);
+#46 = IFCALIGNMENTSEGMENT('1xDWUuPCXCUQ9POql$Cn9Y', #1, $, $, $, $, #88, #47);
+#47 = IFCALIGNMENTVERTICALSEGMENT($, $, 0., 449.999993741124, 150., -9.99999999995544E-4, -9.99999999995544E-4, $, .CONSTANTGRADIENT.);
+#48 = IFCALIGNMENTSEGMENT('3oZ8f1Uxr9ShyisF8oorC4', #1, $, $, $, $, #99, #49);
+#49 = IFCALIGNMENTVERTICALSEGMENT($, $, 449.999993741124, 100.000006258876, 149.550000006261, -9.99999999995544E-4, 4.44444444449813E-4, 69230.7952744269, .CIRCULARARC.);
+#50 = IFCALIGNMENTSEGMENT('1eUP1TyTP6DwVirRK3jwvS', #1, $, $, $, $, #109, #51);
+#51 = IFCALIGNMENTVERTICALSEGMENT($, $, 550., 400., 149.522222225005, 4.44444444449813E-4, 4.44444444449813E-4, $, .CONSTANTGRADIENT.);
+#52 = IFCRELNESTS('3RR2QUaLz2R99R6b9RJ9kY', #1, 'Linear Element Nesting', $, #45, (#46, #48, #50));
+#53 = IFCRELNESTS('1AApY_4xPAaAYbBqg_usA1', #1, 'Alignment Nesting', $, #29, (#34, #45));
+#54 = IFCCOMPOSITECURVE((#55, #63, #71), .U.);
+#55 = IFCCURVESEGMENT(.CONTSAMEGRADIENTSAMECURVATURE., #58, IFCNONNEGATIVELENGTHMEASURE(0.), IFCNONNEGATIVELENGTHMEASURE(400.), #59);
+#56 = IFCCARTESIANPOINT((0., 0.));
+#57 = IFCDIRECTION((1., 0.));
+#58 = IFCAXIS2PLACEMENT2D(#56, #57);
+#59 = IFCLINE(#60, #61);
+#60 = IFCCARTESIANPOINT((0., 0.));
+#61 = IFCVECTOR(#62, 1.);
+#62 = IFCDIRECTION((1., 0.));
+#63 = IFCCURVESEGMENT(.CONTSAMEGRADIENTSAMECURVATURE., #66, IFCNONNEGATIVELENGTHMEASURE(0.), IFCPARAMETERVALUE(150.), #67);
+#64 = IFCCARTESIANPOINT((400., 0.));
+#65 = IFCDIRECTION((1., 0.));
+#66 = IFCAXIS2PLACEMENT2D(#64, #65);
+#67 = IFCCLOTHOID(#70, -273.861278752584);
+#68 = IFCCARTESIANPOINT((0., 0.));
+#69 = IFCDIRECTION((1., 0.));
+#70 = IFCAXIS2PLACEMENT2D(#68, #69);
+#71 = IFCCURVESEGMENT(.DISCONTINUOUS., #74, IFCNONNEGATIVELENGTHMEASURE(0.), IFCPARAMETERVALUE(-7.99999999999997E-1), #75);
+#72 = IFCCARTESIANPOINT((549.662851380011, -7.48795505445));
+#73 = IFCDIRECTION((9.88771077936042E-1, -1.49438132473604E-1));
+#74 = IFCAXIS2PLACEMENT2D(#72, #73);
+#75 = IFCCIRCLE(#78, 500.000000000002);
+#76 = IFCCARTESIANPOINT((0., 0.));
+#77 = IFCDIRECTION((1., 0.));
+#78 = IFCAXIS2PLACEMENT2D(#76, #77);
+#79 = IFCGRADIENTCURVE((#80, #91, #101), .U., #54, $);
+#80 = IFCCURVESEGMENT(.CONTSAMEGRADIENTSAMECURVATURE., #83, IFCNONNEGATIVELENGTHMEASURE(0.), IFCPARAMETERVALUE(450.000218741065), #84);
+#81 = IFCCARTESIANPOINT((0., 150.));
+#82 = IFCDIRECTION((9.99999500000375E-1, -9.99999499995919E-4));
+#83 = IFCAXIS2PLACEMENT2D(#81, #82);
+#84 = IFCLINE(#85, #86);
+#85 = IFCCARTESIANPOINT((0., 0.));
+#86 = IFCVECTOR(#87, 1.);
+#87 = IFCDIRECTION((1., 0.));
+#88 = IFCPRODUCTDEFINITIONSHAPE($, $, (#90));
+#89 = IFCGEOMETRICREPRESENTATIONSUBCONTEXT('Axis', 'Model', *, *, *, *, #13, $, .MODEL_VIEW., $);
+#90 = IFCSHAPEREPRESENTATION(#89, 'Axis', 'GeometricCurveSet', (#80));
+#91 = IFCCURVESEGMENT(.CONTSAMEGRADIENTSAMECURVATURE., #94, IFCNONNEGATIVELENGTHMEASURE(4.71138898071803), IFCPARAMETERVALUE(1.44444408184885E-3), #95);
+#92 = IFCCARTESIANPOINT((449.999993741124, 149.550000006261));
+#93 = IFCDIRECTION((9.99999500000375E-1, -9.99999499995919E-4));
+#94 = IFCAXIS2PLACEMENT2D(#92, #93);
+#95 = IFCCIRCLE(#98, 69230.7996321627);
+#96 = IFCCARTESIANPOINT((0., 0.));
+#97 = IFCDIRECTION((1., 0.));
+#98 = IFCAXIS2PLACEMENT2D(#96, #97);
+#99 = IFCPRODUCTDEFINITIONSHAPE($, $, (#100));
+#100 = IFCSHAPEREPRESENTATION(#89, 'Axis', 'GeometricCurveSet', (#91));
+#101 = IFCCURVESEGMENT(.DISCONTINUOUS., #104, IFCNONNEGATIVELENGTHMEASURE(0.), IFCPARAMETERVALUE(400.000039506171), #105);
+#102 = IFCCARTESIANPOINT((550., 149.522222225005));
+#103 = IFCDIRECTION((9.99999901234583E-1, 4.44444400554072E-4));
+#104 = IFCAXIS2PLACEMENT2D(#102, #103);
+#105 = IFCLINE(#106, #107);
+#106 = IFCCARTESIANPOINT((0., 0.));
+#107 = IFCVECTOR(#108, 1.);
+#108 = IFCDIRECTION((1., 0.));
+#109 = IFCPRODUCTDEFINITIONSHAPE($, $, (#110));
+#110 = IFCSHAPEREPRESENTATION(#89, 'Axis', 'GeometricCurveSet', (#101));
+#111 = IFCPRODUCTDEFINITIONSHAPE($, $, (#112));
+#112 = IFCSHAPEREPRESENTATION(#89, 'Axis', 'Curve3D', (#79));
+#113 = IFCBUILTELEMENT('1bNl5dfr5CmhEmoRtp_rxP', #1, 'SimpleProfile', $, $, #114, #118, $);
+#114 = IFCLOCALPLACEMENT(#25, #117);
+#115 = IFCDIRECTION((0., 0., 1.));
+#116 = IFCDIRECTION((1., 0., 0.));
+#117 = IFCAXIS2PLACEMENT3D(#15, #115, #116);
+#118 = IFCPRODUCTDEFINITIONSHAPE($, $, (#128));
+#119 = IFCDIRECTRIXDERIVEDREFERENCESWEPTAREASOLID(#120, #126, #79, IFCNONNEGATIVELENGTHMEASURE(300.), IFCNONNEGATIVELENGTHMEASURE(700.), #127);
+#120 = IFCDERIVEDPROFILEDEF(.AREA., $, #18, #121, $);
+#121 = IFCCARTESIANTRANSFORMATIONOPERATOR2D(#122, $, #123, $);
+#122 = IFCDIRECTION((0., -1.));
+#123 = IFCCARTESIANPOINT((0., 0.));
+#124 = IFCDIRECTION((0., 0., 1.));
+#125 = IFCDIRECTION((1., 0., 0.));
+#126 = IFCAXIS2PLACEMENT3D(#15, #124, #125);
+#127 = IFCDIRECTION((0., 0., 1.));
+#128 = IFCSHAPEREPRESENTATION(#17, 'Body', 'AdvancedSweptSolid', (#119));
+#129 = IFCRELCONTAINEDINSPATIALSTRUCTURE('1YzId9bnX4CPaQgmnjU6T2', #1, 'Container', 'Container to Contained', (#29, #113), #24);
+#130 = IFCRELAGGREGATES('1POavehI9FOO_m55M80Gut', #1, 'Project Container', 'Project to Spatial Element', #7, (#24));
+ENDSEC;
+END-ISO-10303-21;

DirectrixDerivedReferenceSweptAreaSolid-1/README.md

@@ -0,0 +1,37 @@
+### Intent
+
+This scenario allows testing of a fixed reference swept area solid using IfcDirectrixDerivedReferenceSweptAreaSolid. 
+
+### Prerequisites
+
+This scenario builds upon the alignment semantic and geometry definition.
+
+### Content
+
+This scenario covers the following concepts and/or IFC entities:
+
+- IfcAlignment
+- IfcAlignmentSegment
+- IfcAlignmentHorizontal
+- IfcAlignmentHorizontalSegment
+- IfcLine
+- IfcCircle
+- IfcClothoid
+- IfcCompositeCurve
+- IfcAlignmentVertical
+- IfcAlignmentVerticalSegment
+- IfcGradientCurve
+- IfcDirectrixDerivedReferenceSweptAreaSolid
+- IfcDerivedProfileDef
+- IfcArbitraryClosedProfileDef
+- IfcIndexedPolyCurve
+
+
+### Supporting files
+
+Following files correspond to this scenario:
+
+| Filename                          | Description                                 |
+|-----------------------------------|---------------------------------------------|
+| DirectrixDerivedReferenceSweptAreaSolid-1.ifc              | contains the definition of a simple profile and the use of IfcDirectrixDerivedReferenceSweptAreaSolid to sweep along the gradient curve of the defined alignment|
+| DirectrixDerivedReferenceSweptAreaSolid-1.png              | screenshot of the IFC model |