nanopi-r6s: Use mainline U-Boot

config/boards/nanopi-r6s.csc

@@ -32,3 +32,25 @@ function post_family_tweaks__nanopir6s_naming_udev_network_interfaces() {
 		SUBSYSTEM=="net", ACTION=="add", DRIVERS=="r8169", KERNELS=="0004:41:00.0", NAME:="lan2"
 	EOF
 }
+
+# Mainline U-Boot
+function post_family_config__nanopi_r6s_use_mainline_uboot() {
+	display_alert "$BOARD" "Using mainline U-Boot for $BOARD / $BRANCH" "info"
+
+	declare -g BOOTCONFIG="generic-rk3588_defconfig"             # Use generic defconfig which should boot all RK3588 boards
+	declare -g BOOTDELAY=1                                       # Wait for UART interrupt to enter UMS/RockUSB mode etc
+	declare -g BOOTSOURCE="https://github.com/u-boot/u-boot.git" # We ❤️ Mainline U-Boot
+	declare -g BOOTBRANCH="tag:v2024.07"
+	declare -g BOOTPATCHDIR="v2024.07"
+	# Don't set BOOTDIR, allow shared U-Boot source directory for disk space efficiency
+
+	declare -g UBOOT_TARGET_MAP="BL31=${RKBIN_DIR}/${BL31_BLOB} ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin"
+
+	# Disable stuff from rockchip64_common; we're using binman here which does all the work already
+	unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd
+
+	# Just use the binman-provided u-boot-rockchip.bin, which is ready-to-go
+	function write_uboot_platform() {
+		dd "if=$1/u-boot-rockchip.bin" "of=$2" bs=32k seek=1 conv=notrunc status=none
+	}
+}