Device configuration for Samsung Galaxy S5 mini SM-G800F (kminilte)

Spec Sheet

Feature	Specification
CPU	Quad-core 1.4 GHz
Chipset	Exynos 3 Quad 3470
GPU	Mali-400MP4
Memory	1.5GB RAM
Shipped Android Version	(4.4.2)
Storage	16 GB
MicroSD	Up to 64GB
Battery	2100 mAh
Dimensions	131.1 x 64.8 x 9.1 mm
Display	720 x 1280 pixels
Camera	8 MP, 3264 × 2448 pixels
Release Date	August 2014

Device Picture

---

##How To Build CyanogenMod Android for Samsung Galaxy S5 mini (G800F/M/Y)

CyanogenMod provides "How to build" instructions for some devices. Although this device is not officially supported, the build-steps are not that different between devices. Most of the information on this page also apply to this device: http://wiki.cyanogenmod.org/w/Build_for_t0lte

Requirements:

• At least 8GB RAM (build will stop without a warning with 6GB)
• 65GB (sources and build results) + 35GB (CCACHE)

Perform the following steps from the above "How to build":

1. Install the SDK

2. Install the Build Packages

3. Create the directories

   $ mkdir -p ~/bin
   $ mkdir -p ~/android/system

   Note: you can replace the build root "/android/system" with any directory you like. Let's assume it is "/android/system" in the following steps.

4. Install the repo command

   $ curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
   $ chmod a+x ~/bin/repo

5. Put the ~/bin directory in your path of execution

6. Initialize the CyanogenMod source repository

   $ cd ~/android/system/
   $ repo init -u https://github.com/CyanogenMod/android.git -b cm-13.0

7. Download the source code

   $ repo sync

8. Patch sources

   8.1. Clone the local manifests with the following commands:

   $ cd ~/android/system/
   $ git clone https://github.com/cm-3470/android_.repo_local_manifests -b cm-13.0 .repo/local_manifests

   However if you already obtained local manifests from a different device, just copy at least the following files into .repo/local_manifests :

   • https://github.com/cm-3470/android_.repo_local_manifests/blob/cm-13.0/kminilte.xml
   • https://github.com/cm-3470/android_.repo_local_manifests/blob/cm-13.0/common.xml

   8.2. Fetch device specific repos by synching all repos

   $ repo sync

   8.3. Apply device specific patches (also repeat this step whenever the patches in the directory "patch" are modified):

   $ cd device/samsung/smdk3470-common/patch
   $ ./apply.sh

9. Prepare the device-specific code

   This step is device specific and hence different from the "How to build".

   $ source build/envsetup.sh
   $ lunch cm_kminilte-userdebug

   These commands only have a temporary effect, you will have to perform these commands again, when you use a new terminal window.

10. Turn on caching to speed up build

    Only if you want to rebuilt CM multiple times you also should enable CCACHE

11. Start the build

    $ croot
    $ mka bacon

###Build-results:

The build-process takes a lot of time - the initial build can take about 10h. If CCACHE is enabled, the next builds only take 3-4 hours. Note that especially the linking process (ld) needs a huge amount of memory. The building process stops without a warning if only 6GB are present. In this case you can try to build with only one process (mka bacon -j1).

When the build-process finished the following files will be available:

CyanogenMod image: out/target/product/kminilte/cm-13.0-<date>-UNOFFICIAL-<device>.zip
recovery: out/target/product/kminilte/recovery.img

###Rebuild:

If you want to rebuild the ROM, perform the following steps:

$ repo sync
$ mka clean
$ mka bacon

"repo sync" might fail due to local source code modifications. In this case temporarily revert the changes and reapply them after the update:

$ repo sync (-> fails due to local modifications, failing subprojects are listed in log-output)

For each failing subproject, revert the changes (e.g. with git reset --hard ...)

$ croot
$ repo sync

Now reapply the patches (see section about device/samsung/kminilte/patch/apply.sh)

---

Copyright

#
# Copyright (C) 2014 The CyanogenMod Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#