Graphics Buffer Update -- New PR

cura/Layer.py

@@ -15,6 +15,7 @@ def __init__(self, layer_id: int) -> None:
         self._height = 0.0
         self._thickness = 0.0
         self._polygons = []  # type: List[LayerPolygon]
+        self._vertex_count = 0
         self._element_count = 0
 
     @property
@@ -29,6 +30,10 @@ def thickness(self):
     def polygons(self) -> List[LayerPolygon]:
         return self._polygons
 
+    @property
+    def vertexCount(self):
+        return self._vertex_count
+
     @property
     def elementCount(self):
         return self._element_count
@@ -43,24 +48,40 @@ def lineMeshVertexCount(self) -> int:
         result = 0
         for polygon in self._polygons:
             result += polygon.lineMeshVertexCount()
-
         return result
 
     def lineMeshElementCount(self) -> int:
         result = 0
         for polygon in self._polygons:
             result += polygon.lineMeshElementCount()
+        return result
 
+    def lineMeshCumulativeTypeChangeCount(self, path: int) -> int:
+        """ The number of line-type changes in this layer up until #path.
+        See also LayerPolygon::cumulativeTypeChangeCounts.
+
+        :param path: The path-index up until which the cumulative changes are counted.
+        :return: The cumulative number of line-type changes up until this path.
+        """
+        result = 0
+        for polygon in self._polygons:
+            num_counts = len(polygon.cumulativeTypeChangeCounts)
+            if path < num_counts:
+                return result + polygon.cumulativeTypeChangeCounts[path]
+            path -= num_counts
+            result += polygon.cumulativeTypeChangeCounts[num_counts - 1]
         return result
 
     def build(self, vertex_offset, index_offset, vertices, colors, line_dimensions, feedrates, extruders, line_types, indices):
         result_vertex_offset = vertex_offset
         result_index_offset = index_offset
+        self._vertex_count = 0
         self._element_count = 0
         for polygon in self._polygons:
             polygon.build(result_vertex_offset, result_index_offset, vertices, colors, line_dimensions, feedrates, extruders, line_types, indices)
             result_vertex_offset += polygon.lineMeshVertexCount()
             result_index_offset += polygon.lineMeshElementCount()
+            self._vertex_count += polygon.vertexCount
             self._element_count += polygon.elementCount
 
         return result_vertex_offset, result_index_offset

cura/LayerDataBuilder.py

@@ -63,6 +63,7 @@ def build(self, material_color_map, line_type_brightness = 1.0):
         feedrates = numpy.empty((vertex_count), numpy.float32)
         extruders = numpy.empty((vertex_count), numpy.float32)
         line_types = numpy.empty((vertex_count), numpy.float32)
+        vertex_indices = numpy.arange(0, vertex_count, 1, dtype = numpy.float32)
 
         vertex_offset = 0
         index_offset = 0
@@ -109,6 +110,12 @@ def build(self, material_color_map, line_type_brightness = 1.0):
                 "value": feedrates,
                 "opengl_name": "a_feedrate",
                 "opengl_type": "float"
+                },
+            # Can't use glDrawElements to index (due to oversight in (Py)Qt), can't use gl_PrimitiveID (due to legacy support):
+            "vertex_indices": {
+                "value": vertex_indices,
+                "opengl_name": "a_vertex_index",
+                "opengl_type": "float"
                 }
             }
 

cura/LayerPolygon.py

@@ -55,6 +55,14 @@ def __init__(self, extruder: int, line_types: numpy.ndarray, data: numpy.ndarray
 
         self._jump_mask = self.__jump_map[self._types]
         self._jump_count = numpy.sum(self._jump_mask)
+        self._cumulative_type_change_counts = numpy.zeros(len(self._types))  # See the comment on the 'cumulativeTypeChangeCounts' property below.
+        last_type = self.types[0]
+        current_type_count = 0
+        for i in range(0, len(self._cumulative_type_change_counts)):
+            if last_type != self.types[i]:
+                current_type_count += 1
+                last_type = self.types[i]
+            self._cumulative_type_change_counts[i] = current_type_count
         self._mesh_line_count = len(self._types) - self._jump_count
         self._vertex_count = self._mesh_line_count + numpy.sum(self._types[1:] == self._types[:-1])
 
@@ -179,6 +187,10 @@ def types(self):
     def data(self):
         return self._data
 
+    @property
+    def vertexCount(self):
+        return self._vertex_end - self._vertex_begin
+
     @property
     def elementCount(self):
         return (self._index_end - self._index_begin) * 2  # The range of vertices multiplied by 2 since each vertex is used twice
@@ -207,6 +219,17 @@ def meshLineCount(self):
     def jumpCount(self):
         return self._jump_count
 
+    @property
+    def cumulativeTypeChangeCounts(self):
+        """ This polygon class stores with a vertex the type of the line to the next vertex. However, in other contexts,
+        other ways of representing this might be more suited to the task (for example, when a vertex can possibly only
+        have _one_ type, it's unavoidable to duplicate vertices when the type is changed). In such situations it's might
+        be useful to know how many times the type has changed, in order to keep the various vertex-indices aligned.
+
+        :return: The total times the line-type changes from one type to another within this LayerPolygon.
+        """
+        return self._cumulative_type_change_counts
+
     def getNormals(self) -> numpy.ndarray:
         """Calculate normals for the entire polygon using numpy.
 

plugins/SimulationView/SimulationPass.py

@@ -142,6 +142,7 @@ def render(self):
                 if self._layer_view._current_layer_num > -1 and ((not self._layer_view._only_show_top_layers) or (not self._layer_view.getCompatibilityMode())):
                     start = 0
                     end = 0
+                    current_polygon_offset = 0
                     element_counts = layer_data.getElementCounts()
                     for layer in sorted(element_counts.keys()):
                         # In the current layer, we show just the indicated paths
@@ -155,18 +156,25 @@ def render(self):
                                 if index >= polygon.data.size // 3 - offset:
                                     index -= polygon.data.size // 3 - offset
                                     offset = 1  # This is to avoid the first point when there is more than one polygon, since has the same value as the last point in the previous polygon
+                                    current_polygon_offset += 1
                                     continue
                                 # The head position is calculated and translated
                                 head_position = Vector(polygon.data[index+offset][0], polygon.data[index+offset][1], polygon.data[index+offset][2]) + node.getWorldPosition()
                                 break
                             break
-                        if self._layer_view._minimum_layer_num > layer:
-                            start += element_counts[layer]
-                        end += element_counts[layer]
-
-                    # Calculate the range of paths in the last layer
+                        end += layer_data.getLayer(layer).vertexCount
+                        if layer < self._layer_view._minimum_layer_num:
+                            start = end
+
+                    # Calculate the range of paths in the last layer. -- The type-change count is needed to keep the
+                    # vertex-indices aligned between the two different ways we represent polygons here.
+                    # Since there is one type per line, that could give a vertex two different types, if it's a vertex
+                    # where a type-chage occurs. However, the shader expects vertices to have only one type. In order to
+                    # fix this, those vertices are duplicated. This introduces a discrepancy that we have to take into
+                    # account, which is done by the type-change-count.
+                    type_change_count = layer_data.getLayer(self._layer_view._current_layer_num).lineMeshCumulativeTypeChangeCount(max(self._layer_view._current_path_num - 1, 0))
                     current_layer_start = end
-                    current_layer_end = end + self._layer_view._current_path_num * 2 # Because each point is used twice
+                    current_layer_end = current_layer_start + self._layer_view._current_path_num + current_polygon_offset + type_change_count
 
                     # This uses glDrawRangeElements internally to only draw a certain range of lines.
                     # All the layers but the current selected layer are rendered first

plugins/SimulationView/layers.shader

@@ -13,9 +13,11 @@ vertex =
     attribute highp vec4 a_vertex;
     attribute lowp vec4 a_color;
     attribute lowp vec4 a_material_color;
+    attribute highp float a_vertex_index;
 
     varying lowp vec4 v_color;
     varying float v_line_type;
+    varying highp float v_vertex_index;
 
     void main()
     {
@@ -28,6 +30,7 @@ vertex =
         }
 
         v_line_type = a_line_type;
+        v_vertex_index = a_vertex_index;
     }
 
 fragment =
@@ -40,14 +43,21 @@ fragment =
     #endif // GL_ES
     varying lowp vec4 v_color;
     varying float v_line_type;
+    varying highp float v_vertex_index;
 
     uniform int u_show_travel_moves;
     uniform int u_show_helpers;
     uniform int u_show_skin;
     uniform int u_show_infill;
 
+    uniform highp vec2 u_drawRange;
+
     void main()
     {
+        if (u_drawRange.x >= 0 && u_drawRange.y >= 0 && (v_vertex_index < u_drawRange.x || v_vertex_index > u_drawRange.y))
+        {
+            discard;
+        }
         if ((u_show_travel_moves == 0) && (v_line_type >= 7.5) && (v_line_type <= 9.5)) {  // actually, 8 and 9
             // discard movements
             discard;
@@ -77,77 +87,6 @@ fragment =
         gl_FragColor = v_color;
     }
 
-vertex41core =
-    #version 410
-    uniform highp mat4 u_modelMatrix;
-    uniform highp mat4 u_viewMatrix;
-    uniform highp mat4 u_projectionMatrix;
-
-    uniform lowp float u_active_extruder;
-    uniform lowp float u_shade_factor;
-    uniform highp int u_layer_view_type;
-
-    in highp float a_extruder;
-    in highp float a_line_type;
-    in highp vec4 a_vertex;
-    in lowp vec4 a_color;
-    in lowp vec4 a_material_color;
-
-    out lowp vec4 v_color;
-    out float v_line_type;
-
-    void main()
-    {
-        gl_Position = u_projectionMatrix * u_viewMatrix * u_modelMatrix * a_vertex;
-        v_color = a_color;
-        if ((a_line_type != 8) && (a_line_type != 9)) {
-            v_color = (a_extruder == u_active_extruder) ? v_color : vec4(u_shade_factor * v_color.rgb, v_color.a);
-        }
-
-        v_line_type = a_line_type;
-    }
-
-fragment41core =
-    #version 410
-    in lowp vec4 v_color;
-    in float v_line_type;
-    out vec4 frag_color;
-
-    uniform int u_show_travel_moves;
-    uniform int u_show_helpers;
-    uniform int u_show_skin;
-    uniform int u_show_infill;
-
-    void main()
-    {
-        if ((u_show_travel_moves == 0) && (v_line_type >= 7.5) && (v_line_type <= 9.5)) {  // actually, 8 and 9
-            // discard movements
-            discard;
-        }
-        // helpers: 4, 5, 7, 10
-        if ((u_show_helpers == 0) && (
-            ((v_line_type >= 3.5) && (v_line_type <= 4.5)) ||
-            ((v_line_type >= 6.5) && (v_line_type <= 7.5)) ||
-            ((v_line_type >= 9.5) && (v_line_type <= 10.5)) ||
-            ((v_line_type >= 4.5) && (v_line_type <= 5.5))
-            )) {
-            discard;
-        }
-        // skin: 1, 2, 3
-        if ((u_show_skin == 0) && (
-            (v_line_type >= 0.5) && (v_line_type <= 3.5)
-            )) {
-            discard;
-        }
-        // infill:
-        if ((u_show_infill == 0) && (v_line_type >= 5.5) && (v_line_type <= 6.5)) {
-            // discard movements
-            discard;
-        }
-
-        frag_color = v_color;
-    }
-
 [defaults]
 u_active_extruder = 0.0
 u_shade_factor = 0.60
@@ -159,14 +98,18 @@ u_show_helpers = 1
 u_show_skin = 1
 u_show_infill = 1
 
+u_drawRange = [-1, -1]
+
 [bindings]
 u_modelMatrix = model_matrix
 u_viewMatrix = view_matrix
 u_projectionMatrix = projection_matrix
+u_drawRange = draw_range
 
 [attributes]
 a_vertex = vertex
 a_color = color
 a_extruder = extruder
 a_line_type = line_type
 a_material_color = material_color
+a_vertex_index = vertex_index

plugins/SimulationView/layers3d.shader

@@ -27,6 +27,7 @@ vertex41core =
     in highp float a_extruder;
     in highp float a_prev_line_type;
     in highp float a_line_type;
+    in highp float a_vertex_index;
     in highp float a_feedrate;
     in highp float a_thickness;
 
@@ -37,8 +38,9 @@ vertex41core =
     out lowp vec2 v_line_dim;
     out highp int v_extruder;
     out highp mat4 v_extruder_opacity;
-    out float v_prev_line_type;
-    out float v_line_type;
+    out highp float v_prev_line_type;
+    out highp float v_line_type;
+    out highp float v_index;
 
     out lowp vec4 f_color;
     out highp vec3 f_vertex;
@@ -168,6 +170,7 @@ vertex41core =
         v_extruder = int(a_extruder);
         v_prev_line_type = a_prev_line_type;
         v_line_type = a_line_type;
+        v_index = a_vertex_index;
         v_extruder_opacity = u_extruder_opacity;
 
         // for testing without geometry shader
@@ -191,6 +194,8 @@ geometry41core =
     uniform int u_show_infill;
     uniform int u_show_starts;
 
+    uniform highp vec2 u_drawRange;
+
     layout(lines) in;
     layout(triangle_strip, max_vertices = 40) out;
 
@@ -202,6 +207,7 @@ geometry41core =
     in mat4 v_extruder_opacity[];
     in float v_prev_line_type[];
     in float v_line_type[];
+    in float v_index[];
 
     out vec4 f_color;
     out vec3 f_normal;
@@ -231,6 +237,10 @@ geometry41core =
         float size_x;
         float size_y;
 
+        if (u_drawRange[0] >= 0 && u_drawRange[1] >= 0 && (v_index[0] < u_drawRange[0] || v_index[0] >= u_drawRange[1]))
+        {
+             return;
+        }
         if ((v_extruder_opacity[0][int(mod(v_extruder[0], 4))][v_extruder[0] / 4] == 0.0) && (v_line_type[0] != 8) && (v_line_type[0] != 9)) {
             return;
         }
@@ -427,12 +437,15 @@ u_max_feedrate = 1
 u_min_thickness = 0
 u_max_thickness = 1
 
+u_drawRange = [-1, -1]
+
 [bindings]
 u_modelMatrix = model_matrix
 u_viewMatrix = view_matrix
 u_projectionMatrix = projection_matrix
 u_normalMatrix = normal_matrix
 u_lightPosition = light_0_position
+u_drawRange = draw_range
 
 [attributes]
 a_vertex = vertex
@@ -445,3 +458,4 @@ a_prev_line_type = prev_line_type
 a_line_type = line_type
 a_feedrate = feedrate
 a_thickness = thickness
+a_vertex_index = vertex_index