Merge pull request #17421 from Ultimaker/CURA-11379_fix_primetower_pos

[CURA-11379] Fix Prime-Tower position for printers with explicit disallowed areas.

resources/definitions/Mark2_for_Ultimaker2.def.json

@@ -137,10 +137,9 @@
         "machine_start_gcode": { "value": "\"\"  if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T0 ;reset filament diameter\\nM200 D0 T1\\nG28 Z0; home all\\nG28 X0 Y0\\nG0 Z20 F2400 ;move the platform to 20mm\\nG92 E0\\nM190 S{material_bed_temperature_layer_0}\\nM109 T0 S{material_standby_temperature, 0}\\nM109 T1 S{material_print_temperature_layer_0, 1}\\nM104 T0 S{material_print_temperature_layer_0, 0}\\nT1 ; move to the 2th head\\nG0 Z20 F2400\\nG92 E-7.0 ;prime distance\\nG1 E0 F45 ;purge nozzle\\nG1 E-5.1 F1500 ; retract\\nG1 X90 Z0.01 F5000 ; move away from the prime poop\\nG1 X50 F9000\\nG0 Z20 F2400\\nT0 ; move to the first head\\nM104 T1 S{material_standby_temperature, 1}\\nG0 Z20 F2400\\nM104 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\\nG92 E-7.0\\nG1 E0 F45 ;purge nozzle\\nG1 X60 Z0.01 F5000 ; move away from the prime poop\\nG1 X20 F9000\\nM400 ;finish all moves\\nG92 E0\\n;end of startup sequence\\n\"" },
         "machine_use_extruder_offset_to_offset_coords": { "default_value": false },
         "machine_width": { "default_value": 223 },
+        "prime_tower_position_y": { "value": "170" },
         "retraction_amount": { "default_value": 5.1 },
         "retraction_speed": { "default_value": 25 },
-        "speed_support": { "value": "speed_wall_0" },
-        "speed_wall_x": { "value": "speed_wall" },
         "switch_extruder_prime_speed":
         {
             "enabled": false,

resources/definitions/dagoma_pro_430_dual.def.json

@@ -55,6 +55,7 @@
                     [215, 160]
                 ]
             ]
-        }
+        },
+        "prime_tower_position_x": { "value": "350" }
     }
 }

resources/definitions/deltacomb_dc20dual.def.json

@@ -101,6 +101,8 @@
         },
         "machine_height": { "default_value": 250 },
         "machine_name": { "default_value": "Deltacomb DC-20 DUAL" },
-        "machine_width": { "default_value": 190 }
+        "machine_width": { "default_value": 190 },
+        "prime_tower_position_x": { "value": "60" },
+        "prime_tower_position_y": { "value": "60" }
     }
 }

resources/definitions/dxu.def.json

@@ -131,10 +131,9 @@
         "machine_width": { "default_value": 238 },
         "material_adhesion_tendency": { "enabled": true },
         "material_diameter": { "default_value": 1.75 },
+        "prime_tower_position_x": { "value": "200" },
         "retraction_amount": { "default_value": 6.5 },
         "retraction_speed": { "default_value": 25 },
-        "speed_support": { "value": "speed_wall_0" },
-        "speed_wall_x": { "value": "speed_wall" },
         "switch_extruder_prime_speed":
         {
             "enabled": false,

resources/definitions/fdmprinter.def.json

@@ -6640,7 +6640,7 @@
                     "unit": "mm",
                     "enabled": "resolveOrValue('prime_tower_enable')",
                     "default_value": 200,
-                    "value": "(resolveOrValue('machine_width') / 2 + resolveOrValue('prime_tower_size') / 2) if resolveOrValue('machine_shape') == 'elliptic' else (resolveOrValue('machine_width') - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_x'))), 1)) - (resolveOrValue('machine_width') / 2 if resolveOrValue('machine_center_is_zero') else 0)",
+                    "value": "(resolveOrValue('machine_width') / 2 + resolveOrValue('prime_tower_size') / 2) if resolveOrValue('machine_shape') == 'elliptic' else (resolveOrValue('machine_width') - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('machine_nozzle_offset_x')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_x'))), 1)) - (resolveOrValue('machine_width') / 2 if resolveOrValue('machine_center_is_zero') else 0)",
                     "maximum_value": "(machine_width / 2 if machine_center_is_zero else machine_width) - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0)",
                     "minimum_value": "resolveOrValue('prime_tower_size') + (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - (machine_width / 2 if machine_center_is_zero else 0)",
                     "settable_per_mesh": false,
@@ -6654,7 +6654,7 @@
                     "unit": "mm",
                     "enabled": "resolveOrValue('prime_tower_enable')",
                     "default_value": 200,
-                    "value": "machine_depth - prime_tower_size - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_y'))), 1) - (resolveOrValue('machine_depth') / 2 if resolveOrValue('machine_center_is_zero') else 0)",
+                    "value": "machine_depth - prime_tower_size - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('machine_nozzle_offset_y')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_y'))), 1) - (resolveOrValue('machine_depth') / 2 if resolveOrValue('machine_center_is_zero') else 0)",
                     "maximum_value": "(machine_depth / 2 - resolveOrValue('prime_tower_size') if machine_center_is_zero else machine_depth - resolveOrValue('prime_tower_size')) - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0)",
                     "minimum_value": "(machine_depth / -2 if machine_center_is_zero else 0) + (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0)",
                     "settable_per_mesh": false,

resources/definitions/ultimaker3.def.json

@@ -150,6 +150,7 @@
             "value": "resolveOrValue('print_sequence') != 'one_at_a_time'"
         },
         "prime_tower_enable": { "default_value": true },
+        "prime_tower_position_x": { "value": "185" },
         "prime_tower_wipe_enabled": { "default_value": false },
         "retraction_amount": { "value": "6.5" },
         "retraction_hop": { "value": "2" },