Add RAK2560 onboarding (#1294)

* doc: Initial file creation

* doc: Update file content

* doc: Add feedback

doc/content/devices/models/dragino-lht52/_index.md

@@ -22,7 +22,7 @@ Provisioning information (the **JoinEUI/AppEUI**, **DevEUI** and **AppKey**) can
 
 The LHT52 can be onboarded to {{% tts %}} using the **Device Repository** or by **manually** entering the device specifics.
 
-The [LoRaWAN® Device repository](https://github.com/TheThingsNetwork/lorawan-devices) comprises over 600 end-device profiles, including the Dragino LHT52, which enables quick and easy onboarding to {{% tts %}}.
+The [LoRaWAN® Device repository](https://github.com/TheThingsNetwork/lorawan-devices) comprises over 800 end-device profiles, including the Dragino LHT52, which enables quick and easy onboarding to {{% tts %}}.
 
 In the **End device type** section, under **Input method**, select either the **Select the end device in the LoRaWAN Device Repository** or **Enter end device specifics manually** option. The [Onboarding devices without QR codes]({{< ref "/devices/adding-devices/#onboarding-devices-without-qr-codes" >}}) section of the [Adding Devices]({{< ref "/devices/adding-devices/" >}}) guide explains this procedure in detail. Following details are LHT52-specific:
 

doc/content/devices/models/generic-node-se/_index.md

@@ -40,7 +40,7 @@ To continue with the rest of the registration process you can choose either **Lo
 
 ### Using the LoRaWAN Device Repository
 
-The [LoRaWAN® Device repository](https://github.com/TheThingsNetwork/lorawan-devices) comprises over 600 end-device profiles, including the Generic Node Sensor Edition, which requires less information for registration with {{% tts %}}.
+The [LoRaWAN® Device repository](https://github.com/TheThingsNetwork/lorawan-devices) comprises over 800 end-device profiles, including the Generic Node Sensor Edition, which requires less information for registration with {{% tts %}}.
 
 In the **End device type** section, under **Input Method** select **Select the end device in the LoRaWAN device repository**. Then select/enter the following values:
 

doc/content/devices/models/lw001-bg-pro/_index.md

@@ -41,7 +41,7 @@ The device can be onboarded using the **Device Repository** or **manually**.
 
 {{< note "The LW001-BG Pro does not support onboarding with a QR code." />}}
 
-The [LoRaWAN® Device repository](https://github.com/TheThingsNetwork/lorawan-devices) comprises over 600 end-device profiles, including the Moko Smart LW001-BG Pro, which enables quick and easy registration with {{% tts %}}.
+The [LoRaWAN® Device repository](https://github.com/TheThingsNetwork/lorawan-devices) comprises over 800 end-device profiles, including the Moko Smart LW001-BG Pro, which enables quick and easy registration with {{% tts %}}.
 
 In the **End device type** section, under **Input method**, select either the **Select the end device in the LoRaWAN Device Repository** or **Enter end device specifics manually** option. The [Onboarding devices without QR codes]({{< ref "/devices/adding-devices/#onboarding-devices-without-qr-codes" >}}) section of the [Adding Devices]({{< ref "/devices/adding-devices/" >}}) guide explains this procedure in detail. Following details are LW001-BG Pro-specific:
 

doc/content/devices/models/rakwireless-rak2560/_index.md

@@ -0,0 +1,63 @@
+---
+title: "RAKwireless RAK2560 Sensor Hub"
+description: ""
+weight: 
+---
+
+{{< figure src="rak2560.png" alt="RAK2560" class="float plain" width="80%">}}
+
+The RAKwireless [RAK2560 WisNode Sensor Hub](https://store.rakwireless.com/products/sensor-hub) is a modular sensor ecosystem consisting of the Sensor Hub Smart Datalogger and multiple pre-configured sensor probes. With pluggable, interchangeable probes, and the option to add third-party sensors to the mixture, the Sensor Hub is a suitable and versatile solution platform for various IoT applications where environmental monitoring is needed. 
+
+<!--more-->
+
+## Sensor Setup
+
+To acquire the provisioning information and properly setup the sensor, you must download the **WisToolBox** App from the Play Store or the App Store on your phone.
+
+After opening the app it will ask you to log in/create an account, but you can click on **Skip** in the top right if you don't wish to sign up.
+
+Then press **Start**, select **NFC Activation** and follow the instructions for connecting to the device.
+
+Once you reach the device menu, select the **LORA & LORAWAN PARAMETERS** tab. Open the **Global Settings** dropdown and make sure the **Join mode** and **Region** are set correctly. 
+
+Then open the **LoRaWAN keys, ID, EUI** dropdown and copy the **Device EUI**, **AppEUI** and **AppKey** and save them somewhere as they will be needed later for onboarding.
+
+{{< figure src="wistoolbox.png" alt="Settings tab of the device." width="40%">}}
+
+Finally, select the **Sensor Probe** tab up top and open the dropdowns for the sensors that are used. Here you can set the intervals or thresholds for transmitting data.
+
+Make sure you enable the **Send uplink** toggle depending on which method you use.
+
+## Onboarding to {{% tts %}}
+
+The device can be onboarded using the **Device Repository** or **manually**.
+
+{{< note "The RAK2560 does not support onboarding with a QR code." />}}
+
+The [LoRaWAN® Device repository](https://github.com/TheThingsNetwork/lorawan-devices) comprises over 800 end-device profiles, including the RAK2560, which enables quick and easy registration with {{% tts %}}.
+
+In the **End device type** section, under **Input method**, select either the **Select the end device in the LoRaWAN Device Repository** or **Enter end device specifics manually** option. The [Onboarding devices without QR codes]({{< ref "/devices/adding-devices/#onboarding-devices-without-qr-codes" >}}) section of the [Adding Devices]({{< ref "/devices/adding-devices/" >}}) guide explains this procedure in detail. Following details are RAK2560-specific:
+
+- End device brand: **RAKwireless Technology Co.**
+- Model: **RAK2560 Sensor Hub**
+- Hardware Ver.: **1.0**
+- Firmware Ver.: **1.0.0**
+
+After configuring your device, select the **Register end device** button.
+
+{{< figure src="rak2560-register.png" alt="Settings for registration through device repository" >}}
+
+If you prefer onboarding **manually**, in the **End device type** section, under **Input Method**, select the **Enter end device specifics manually** option. The [Manually adding devices]({{< ref "/devices/adding-devices/manual/" >}}) and [Over the Air Activation (OTAA)]({{< ref "/devices/adding-devices/manual/otaa/" >}}) guides explain this procedure in detail. Following details are specific to the RAK2560:
+
+- LoRaWAN version: **LoRaWAN Specification 1.0.3**
+- Regional parameters version: **RP001 Regional Parameters 1.0.3 revision A** 
+
+After configuring your device, select the **Register end device** button.
+
+{{< figure src="manual-register.png" alt="Settings for manual registration" >}}
+
+## Monitoring Live Data
+
+When your device is registered, select the **Live Data** tab to view all messages exchanged between your end device and {{% tts %}}.
+
+{{< figure src="rak2560-live-data.png" alt="Live Data tab" >}}

doc/content/devices/models/seeed-s210x/_index.md

@@ -30,7 +30,7 @@ The device can be onboarded using the **Device Repository** or **manually**.
 
 {{< note "The S210x does not support onboarding with a QR code." />}}
 
-The [LoRaWAN® Device repository](https://github.com/TheThingsNetwork/lorawan-devices) comprises over 600 end-device profiles, including the Seeed Studio, which enables quick and easy registration with {{% tts %}}.
+The [LoRaWAN® Device repository](https://github.com/TheThingsNetwork/lorawan-devices) comprises over 800 end-device profiles, including the Seeed Studio, which enables quick and easy registration with {{% tts %}}.
 
 In the **End device type** section, under **Input method**, select either the **Select the end device in the LoRaWAN Device Repository** or **Enter end device specifics manually** option. The [Onboarding devices without QR codes]({{< ref "/devices/adding-devices/#onboarding-devices-without-qr-codes" >}}) section of the [Adding Devices]({{< ref "/devices/adding-devices/" >}}) guide explains this procedure in detail. Following details are S210x-specific:
 

doc/content/devices/models/sensative-strips/_index.md

@@ -22,7 +22,7 @@ Provisioning information (the **JoinEUI/AppEUI**, **DevEUI** and **AppKey**) can
 
 The device can be onboarded using the **Device Repository** or by **manually** entering the specific information.
 
-The [LoRaWAN® Device repository](https://github.com/TheThingsNetwork/lorawan-devices) comprises over 600 end-device profiles, including the Sensative Strips, which enables quick and easy registration with {{% tts %}}.
+The [LoRaWAN® Device repository](https://github.com/TheThingsNetwork/lorawan-devices) comprises over 800 end-device profiles, including the Sensative Strips, which enables quick and easy registration with {{% tts %}}.
 
 In the **End device type** section, under **Input method**, select either the **Select the end device in the LoRaWAN Device Repository** or **Enter end device specifics manually** option. The [Onboarding devices without QR codes]({{< ref "/devices/adding-devices/#onboarding-devices-without-qr-codes" >}}) section of the [Adding Devices]({{< ref "/devices/adding-devices/" >}}) guide explains this procedure in detail. Following details are Strips-specific: