PCell DC Series Rings

klayout_dot_config/pymacros/SiEPIC_EBeam_PCells.lym

@@ -2322,6 +2322,138 @@ class ebeam_taper_te1550(pya.PCellDeclarationHelper):
     return "ebeam_taper_te1550(" + ('%.3f-%.3f-%.3f' % (self.wg_width1,self.wg_width2,self.wg_length) ) + ")"
 
 
+class DirectionalCoupler_SeriesRings(pya.PCellDeclarationHelper):
+  """
+  The PCell declaration for the DirectionalCoupler_SeriesRings.
+
+  """
+
+  def __init__(self):
+
+    # Important: initialize the super class
+    super(DirectionalCoupler_SeriesRings, self).__init__()
+
+    # declare the parameters
+    self.param("silayer", self.TypeLayer, "Si Layer", default = pya.LayerInfo(1, 0))
+    self.param("r2", self.TypeDouble, "Radius of Upper Ring", default = 10)
+    self.param("r1", self.TypeDouble, "Radius of Lower Ring", default = 10)
+    self.param("w", self.TypeDouble, "Waveguide Width", default = 0.5)
+    self.param("g", self.TypeDouble, "Gap", default = 0.2)
+    self.param("Lc", self.TypeDouble, "Coupler Length", default = 0.0)
+    self.param("pinrec", self.TypeLayer, "PinRec Layer", default = pya.LayerInfo(69, 0))
+    self.param("devrec", self.TypeLayer, "DevRec Layer", default = pya.LayerInfo(68, 0))
+    self.param("textl", self.TypeLayer, "Text Layer", default = pya.LayerInfo(10, 0))
+
+  def display_text_impl(self):
+    # Provide a descriptive text for the cell
+    return "DirectionalCoupler_SeriesRings(R1=" + ('%.3f' % self.r1)+ ",R2=" + ('%.3f' % self.r2) + ",g=" + ('%g' % (1000*self.g)) + ")"
+
+  def can_create_from_shape_impl(self):
+    return False
+
+  def produce_impl(self):
+    # This is the main part of the implementation: create the layout
+
+    from math import pi, cos, sin
+
+    # fetch the parameters
+    dbu = self.layout.dbu
+    ly = self.layout
+
+    LayerSi = self.silayer
+    LayerSiN = ly.layer(LayerSi)
+    LayerPinRecN = ly.layer(self.pinrec)
+    LayerDevRecN = ly.layer(self.devrec)
+    TextLayerN = ly.layer(self.textl)
+
+
+    w = int(round( self.w/dbu))
+    r1 = int(round( self.r1/dbu))
+    r2 = int(round( self.r2/dbu))
+    g = int(round( self.g/dbu))
+    Lc = int(round( self.Lc/dbu))
+
+    # draw the half-circle
+    x = 0
+    y = r1+r2+g+w
+    layout_arc_wg_dbu( self.cell, LayerSiN, x-Lc/2, y, r2, w, 180, 270)
+    layout_arc_wg_dbu( self.cell, LayerSiN, x+Lc/2, y, r2, w, 270, 360)
+
+    # Create the pins, as short paths:
+    pin_length = 200 # database units, = 0.2 microns
+
+    # Pins on the top side:
+    pin = pya.Path([pya.Point(-r2-Lc/2, y+pin_length/2), pya.Point(-r2-Lc/2, y-pin_length/2)], w)
+    self.cell.shapes(LayerPinRecN).insert(pin)
+    t = pya.Trans(-r2-Lc/2, y)
+    text = pya.Text ("pin2", t)
+    shape =  self.cell.shapes(LayerPinRecN).insert(text)
+    shape.text_size = 0.4/dbu
+
+    pin = pya.Path([pya.Point(r2+Lc/2, y+pin_length/2), pya.Point(r2+Lc/2, y-pin_length/2)], w)
+    self.cell.shapes(LayerPinRecN).insert(pin)
+    t = pya.Trans(r2+Lc/2, y)
+    text = pya.Text ("pin4", t)
+    shape =  self.cell.shapes(LayerPinRecN).insert(text)
+    shape.text_size = 0.4/dbu
+
+    if Lc > 0:
+      wg1 = pya.Box(-Lc/2,w + w/2+ g+ r1 , Lc/2, w/2 + g+ r1)
+      self.cell.shapes(LayerSiN).insert(wg1)
+
+
+    y = 0
+    layout_arc_wg_dbu( self.cell, LayerSiN, x-Lc/2, y, r1, w, 90, 180)
+    layout_arc_wg_dbu( self.cell, LayerSiN, x+Lc/2, y, r1, w, 0, 90)
+
+    # Pins on the lower side:
+    pin = pya.Path([pya.Point(-r1-Lc/2, y+pin_length/2), pya.Point(-r1-Lc/2, y-pin_length/2)], w)
+    self.cell.shapes(LayerPinRecN).insert(pin)
+    t = pya.Trans(-r1-Lc/2, y)
+    text = pya.Text ("pin1", t)
+    shape = self.cell.shapes(LayerPinRecN).insert(text)
+    shape.text_size = 0.4/dbu
+
+    pin = pya.Path([pya.Point(r1+Lc/2, y+pin_length/2), pya.Point(r1+Lc/2, y-pin_length/2)], w)
+    self.cell.shapes(LayerPinRecN).insert(pin)
+    t = pya.Trans(r1+Lc/2, y)
+    text = pya.Text ("pin3", t)
+    shape = self.cell.shapes(LayerPinRecN).insert(text)
+    shape.text_size = 0.4/dbu
+
+    if Lc > 0:
+      wg1 = pya.Box(-Lc/2,  r1 -w/2, Lc/2, w/2 + r1)
+      self.cell.shapes(LayerSiN).insert(wg1)
+
+    if(r1>r2):
+      r = r1
+    else: 
+      r = r2
+
+
+    # Create the device recognition layer -- make it 1 * wg_width away from the waveguides.
+    dev = pya.Box(-r-w/2-w-Lc/2,r1+r2+g+w, r+w/2+w+Lc/2, y )
+    self.cell.shapes(LayerDevRecN).insert(dev)
+
+
+    # Compact model information
+    t = pya.Trans(((r1+r2)/2)/4, 0)
+    text = pya.Text ("Lumerical_INTERCONNECT_library=Design kits/ebeam_v1.2", t)
+    shape = self.cell.shapes(LayerDevRecN).insert(text)
+    shape.text_size =  r*0.017
+    t = pya.Trans(((r1+r2)/2)/4, ((r1+r2)/2)/4)
+    text = pya.Text ('Lumerical_INTERCONNECT_component=ebeam_dc_seriesrings', t)
+    shape = self.cell.shapes(LayerDevRecN).insert(text)
+    shape.text_size =  r*0.017
+    t = pya.Trans(((r1+r2)/2)/4, ((r1+r2)/2)/2)
+  #  text = pya.Text ('Spice_param:wg_width=%.3fu gap="%s" radius="%s"'% ( w, g,int( r)), t)
+    text = pya.Text ('Spice_param:wg_width=%.3fu gap=%.3fu radius1=%.3fu radius2=%.3fu'% ( w, g,int( r1), int(r2)), t)
+    shape = self.cell.shapes(LayerDevRecN).insert(text)
+    shape.text_size =  r*0.017
+
+    print("Done drawing the layout for - DirectionalCoupler_SeriesRings: %.3f-%.3f-%g" % ( self.r1, self.r2, self.g) )
+
+
 
 
 class SiEPIC(pya.Library):
@@ -2353,6 +2485,7 @@ class SiEPIC(pya.Library):
     self.layout().register_pcell("SWG_waveguide", SWG_waveguide())
     self.layout().register_pcell("SWG_to_strip_waveguide", SWG_to_strip_waveguide())
     self.layout().register_pcell("spiral", spiral())
+    self.layout().register_pcell("DirectionalCoupler_SeriesRings", DirectionalCoupler_SeriesRings())
 
     # Register us with the name "SiEPIC_EBeam_PCells".
     # If a library with that name already existed, it will be replaced then.