Update README.md

README.md

@@ -1,35 +1,3 @@
-# Wifi in macOS Sonoma
-
-With macOS Sonoma, the Broadcom based Wifi cards don't work plug and play anymore. It is actually a very annoying process now, that you have to repeat after every macOS Update!
-
-First, I recommend you to install Sonoma using the Full Installer. So create a Installer USB Stick and run the Sonoma Installer from there.
-
-With macOS Sonoma, the following is required to get the Broadcom based Wifi cards to work, also our beloved Fenvi T919:
-- Additional Kexts: ```IO80211FamilyLegacy.kext```, ```IOSkywalkFamily.kext```, ```AMFIPass.kext```. Also these Kexts in a very high priority after Lilu and VirtualSMC.
-- Blocking Kexts: ```com.apple.iokit.IOSkywalkFamily```
-- Bootarg: ```-amfipassbeta```
-- ```csr-active-config = <03080000>```
-- ```SecureBootModel = Disabled``` (temporary, can be enabled after the OCLP Patcher)
-- ```DmgLoading = Any``` (temporary, can be set to Signed after the OCLP Patcher)
-
-After you have installed Sonoma, you need to run a tool called OCLP Patcher: https://dortania.github.io/OpenCore-Legacy-Patcher/BUILD.html
-
-Therefore you need to go into the Actions Tab of their Github page and search for a build that has an artifact, the OCLP GUI app.
-
-E.g. https://github.com/dortania/OpenCore-Legacy-Patcher/actions/runs/6216414710
-
-Run the OCLP Patcher an "Post-install Root Patch". It will run through if SecureBoot and SIP is disabled.
-
-<img src="Docs/OCLP_1.png" height="300">
-
-<img src="Docs/OCLP_2.png" height="500">
-
-After the reboot, you can enable SecureBoot again. Wifi will still work. 
-
-But as I said, you have to repeat these steps for every macOS update: 
-- ```Disable SecureBoot``` in BIOS
-- config.plist: ```SecureBootModel = Disabled``` and ```DmgLoading = Any```
-
 # Hackintosh-Intel-i9-10900k-Gigabyte-Z490-Vision-D
 
 ![About this mac](Docs/macOSBigSur.png)
@@ -75,6 +43,28 @@ https://youtu.be/szOofRy7uBc
 
 # Details
 
+# Wifi in macOS Sonoma
+
+With macOS Sonoma, the Broadcom based Wifi cards don't work plug and play anymore. It is a very annoying process now, that you have to repeat after every macOS Update!
+
+General Requirements for Broadcom Wifi in Sonoma: 
+- Additional Kexts: ```IO80211FamilyLegacy.kext```, ```IOSkywalkFamily.kext```, ```AMFIPass.kext```. Also these Kexts in a very high priority after Lilu and VirtualSMC.
+- Blocking Kexts: ```com.apple.iokit.IOSkywalkFamily```
+- Bootarg: ```-amfipassbeta```
+
+To be repeated for every macOS Update: 
+
+1. Disable SecureBoot via config.plist: ```SecureBootModel = Disabled``` and ```DmgLoading = Any```
+2. ```Disable SecureBoot``` in BIOS
+3. Install the macOS Update
+4. Run the OCLP Patcher and start the "Post-install Root Patch".
+5. Enable SecureBoot via config.plist: ```SecureBootModel = ```(your SecureBootModel according to here: https://dortania.github.io/OpenCore-Post-Install/universal/security/applesecureboot.html#securebootmodel) and ```DmgLoading = Any```
+6. Enable SecureBoot in BIOS again
+
+## Getting the OpenCore Legacy Patcher
+
+Install the newest release from here: https://github.com/dortania/OpenCore-Legacy-Patcher/releases
+
 ## Installation steps
 
 1. Create an MacOS Catalina 10.15.6 USB-Installer Stick. Do this on a real Mac.