Add SPIDMA TEST

examples_v20x/spidmatest/Makefile

@@ -0,0 +1,11 @@
+all : flash
+
+TARGET:=spidmatest
+TARGET_MCU:=CH32V203
+
+include ../../ch32v003fun/ch32v003fun.mk
+
+flash : cv_flash
+clean : cv_clean
+
+

examples_v20x/spidmatest/funconfig.h

@@ -0,0 +1,9 @@
+#ifndef _FUNCONFIG_H
+#define _FUNCONFIG_H
+
+#define FUNCONF_USE_DEBUGPRINTF 0
+#define FUNCONF_USE_UARTPRINTF  1
+
+
+#endif
+

examples_v20x/spidmatest/spidmatest.c

@@ -0,0 +1,131 @@
+#include "ch32v003fun.h"
+#include <stdio.h>
+#include <string.h>
+
+
+#define SENDBUFF_WORDS 256
+uint16_t sendbuff[SENDBUFF_WORDS];
+
+// Bits are shifted out MSBit first, then to LSBit
+
+
+void DMA1_Channel5_IRQHandler( void ) __attribute__((interrupt));
+void DMA1_Channel5_IRQHandler( void ) 
+{
+	//GPIOD->BSHR = 1;	 // Turn on GPIOD0 for profiling
+
+	// Backup flags.
+	volatile int intfr = DMA1->INTFR;
+	do
+	{
+		// Clear all possible flags.
+		DMA1->INTFCR = DMA1_IT_GL5;
+
+
+		uint16_t * sb = 0;
+		if( intfr & DMA1_IT_HT5 )
+		{
+			sb = sendbuff;
+		}
+		else if( intfr & DMA1_IT_TC5 )
+		{
+			sb = sendbuff + SENDBUFF_WORDS/2;
+		}
+
+		if( sb )
+		{
+			//memset( sb, 0xf0, SENDBUFF_WORDS/2*2 );
+			int i;
+			for( i = 0; i < SENDBUFF_WORDS/2; i++ )
+			{
+				sb[i] = 0x0AAF;
+			}
+		}
+
+		// Can abort send with  DMA1_Channel3->CFGR &= ~DMA_Mode_Circular;
+		intfr = DMA1->INTFR;
+	} while( intfr );
+
+	//GPIOD->BSHR = 1<<16; // Turn off GPIOD0 for profiling
+}
+
+
+int main()
+{
+	SystemInit();
+
+	funGpioInitAll();
+
+	// Force HCLK to be nodiv. ch32vfun sets it to be a reasonbly high div.
+	RCC->CFGR0 &= ~RCC_PPRE1_DIV16;
+
+// MCO for testing.
+//	funPinMode( PA8, GPIO_CFGLR_OUT_50Mhz_AF_PP );	RCC->CFGR0 |= RCC_CFGR0_MCO_PLL;
+
+	funPinMode( PB12, GPIO_CFGLR_OUT_50Mhz_AF_PP );
+	funPinMode( PB13, GPIO_CFGLR_OUT_50Mhz_AF_PP );
+	funPinMode( PB14, GPIO_CFGLR_OUT_50Mhz_AF_PP );
+	funPinMode( PB15, GPIO_CFGLR_OUT_50Mhz_AF_PP );
+
+	memset( sendbuff, 0xac, sizeof(sendbuff) ); 
+
+	RCC->APB1PRSTR = RCC_SPI2RST;
+	RCC->APB1PRSTR = 0;
+	RCC->APB1PCENR |= RCC_APB1Periph_SPI2;
+	RCC->AHBPCENR |= RCC_AHBPeriph_DMA1;
+
+	// Configure SPI 
+	SPI2->CTLR1 = 
+		SPI_NSS_Soft | SPI_CPHA_1Edge | SPI_CPOL_Low | SPI_DataSize_16b |
+		SPI_Mode_Master | SPI_Direction_1Line_Tx |
+		0 |
+		0<<3; // Divisior = 0
+
+	// If using DMA may need this.
+	SPI2->CTLR2 = SPI_CTLR2_TXDMAEN;
+
+
+	SPI2->HSCR = 1; // High-speed enable.
+
+
+	SPI2->I2SCFGR |= SPI_I2SCFGR_I2SE; // Enable
+	SPI2->CTLR1 |= CTLR1_SPE_Set;
+	//SPI2->DATAR = 0x55aa; // Set SPI line Low.
+
+	//DMA1_Channel5 is for SPI2TX
+	DMA1_Channel5->PADDR = (uint32_t)&SPI2->DATAR;
+	DMA1_Channel5->MADDR = (uint32_t)sendbuff;
+	DMA1_Channel5->CNTR  = 0;// sizeof( bufferset )/2; // Number of unique copies.  (Don't start, yet!)
+	DMA1_Channel5->CFGR  =
+		DMA_M2M_Disable |		 
+		DMA_Priority_VeryHigh |
+		DMA_MemoryDataSize_HalfWord |
+		DMA_PeripheralDataSize_HalfWord |
+		DMA_MemoryInc_Enable |
+		DMA_Mode_Normal | // OR DMA_Mode_Circular or DMA_Mode_Normal
+		DMA_DIR_PeripheralDST |
+		DMA_IT_TC | DMA_IT_HT; // Transmission Complete + Half Empty Interrupts. 
+
+	NVIC_EnableIRQ( DMA1_Channel5_IRQn );
+	DMA1_Channel5->CFGR |= DMA_CFGR1_EN;
+
+
+	memset( sendbuff, 0xaa, sizeof( sendbuff ) );
+
+
+	// Enter critical section.
+	//__disable_irq();
+	DMA1_Channel5->CFGR &= ~DMA_Mode_Circular;
+	DMA1_Channel5->CNTR  = 0;
+	DMA1_Channel5->MADDR = (uint32_t)sendbuff;
+	//__enable_irq();
+
+	DMA1_Channel5->CNTR = SENDBUFF_WORDS; // Number of unique uint16_t entries.
+	DMA1_Channel5->CFGR |= DMA_Mode_Circular;
+
+
+	while(1)
+	{
+	}
+}
+