Ikea E1525/E1745: Fix pairing instructions (#3414)

Koenkk · Jan 10, 2025 · 491d5b4 · 491d5b4
1 parent a5a499c
commit 491d5b4
Showing 1 changed file with 4 additions and 3 deletions.
diff --git a/docs/devices/E1525_E1745.md b/docs/devices/E1525_E1745.md
@@ -27,9 +27,10 @@ pageClass: device-page
 
 
 ### Pairing
-Pair the sensor to Zigbee2MQTT by long pressing the pair button for more than 10 seconds.
-The red light on the front side should flash a few times and then turn off. If the light red light does not show up and batteries are OK, try pressing the pair button 4 short times.
-After a few seconds it turns back on and pulsate. When connected, the light turns off.
+Pair the sensor to Zigbee2MQTT by pressing the pair button 4 short times.
+The red light on the front side should flash a few times and then turn off. After a couple of seconds it will turn on again and pulsate to indicate that the pairing is in process. When connected, the light turns off.
+
+A long press of 10 seconds on the pair button will enter the Zigbee Light Link (ZLL) pairing mode. Use this if you don't want to pair the device to Zigbee2MQTT and instead to a smart light bulb directly. 
 
 ### Binding
 #### Warning! You need to activate the motion sensor and then immediately press bind in the Zigbee2MQTT interface. If the sensor is sleeping the bind will fail. credits: [issue #3831](https://github.com/Koenkk/zigbee2mqtt/issues/3831)