gPORT_bootloader_V02.01.00.00

gPORT-Firmware

Bootloader

A Bootloader is a small piece of code that runs (normally just for a few seconds) when gPORT is powered on. One of the bootloader’s primary responsibilities is to allow easy upgrading of the main firmware

Nearly all gPORT ship with a bootloader pre-installed and most users will never need to upgrade it but there are some advantages to upgrading to the latest gPORT specific bootloader

Download the latest bootloader

The gPORT specific bootloader is included within the GPORT Firmware.

NOTE

Using interface cable to flash the Bootloader at address 0x08000000

PixyC_V01.00.01.04

What's new?

• Update change camera profile
• Update new profile value to remote widget

PixyC_V01.00.01.01

Features

Capturing and live streaming video from DJI drone system

gPort lets your payload (including camera & Gremsy gimbal) communicate with the DJI drone's transmission system to capture and live stream video in real-time as well as provide high-quality video with efficient H.264 encoding.

Gathering data from the Drone and Gimbal to tag your pictures

Controlling and configuring the Gimbal

Controlling and configuring the Camera

PixyC_V03.09.00.02

What's new?

• Update new Payload SDK V3.9.0

Note

1. Only support the camera video stream in h264 DJI format
2. Firmware gimbal

• PixyU v.7.8.3 or above
• Download firmware at: https://github.com/Gremsy/PixyU-Firmware/releases/tag/v7.8.3_Official

3. Firmware HDMI converter

• v1.0.8.Beta
• Download firmware at: https://github.com/Gremsy/gPort_HDMI_Converter/releases/tag/v1.0.8.Beta