sunfish: Update gps.conf

Apply the following commits from the GPS HAL gps.conf:
9cc808c GPS NMEA: enhance gga fix qualtiy for sensor contributed fix
7bd18fd FR56985: NMEA reporting rate configuration in N-Hz2.0 mode
d71529a Logging buffer implemented by skip list
d9182f7 update default gps.conf entries
fdbbb0d Remove XTRA version check.
61260d6 update gps.conf configurations for eDGNSS
8dc2ec8 Enable new LPP Profile options for 5G
b72ebe3 Add option for pds api deployment config
c42382c Remove CDFW_USERS from gps.conf
3edeba1 Support baseband C/N0 in SV info for older modems
17923fd add nmea tag block grouping feature

No functional changes.

Change-Id: Idd15f56ad7280887dcb5645330c7b430c9066d63

gps.conf

@@ -1,10 +1,3 @@
-#Version check for XTRA
-#DISABLE = 0
-#AUTO    = 1
-#XTRA2   = 2
-#XTRA3   = 3
-XTRA_VERSION_CHECK=0
-
 # Error Estimate
 # _SET = 1
 # _CLEAR = 0
@@ -81,10 +74,12 @@ CAPABILITIES=0x17
 ####################################
 #  LTE Positioning Profile Settings
 ####################################
+# LPP_PROFILE is a bit mask
 # 0: Enable RRLP on LTE(Default)
-# 1: Enable LPP_User_Plane on LTE
-# 2: Enable LPP_Control_Plane
-# 3: Enable both LPP_User_Plane and LPP_Control_Plane
+# 0x1: LPP User Plane
+# 0x2: LPP Control Plane
+# 0x4: LPP User Plane for NR5G
+# 0x8: LPP Control Plane for NR5G
 #LPP_PROFILE = 2
 
 ####################################
@@ -99,6 +94,49 @@ DATUM_TYPE = 0
 ################################
 # NMEA provider (1=Modem Processor, 0=Application Processor)
 NMEA_PROVIDER=0
+
+################################
+# NMEA TAG BLOCK GROUPING
+################################
+# NMEA tag block grouping is only applicable to GSA
+# Default is disabled
+# 0 - disabled
+# 1 - enabled
+NMEA_TAG_BLOCK_GROUPING_ENABLED = 0
+
+# Customized NMEA GGA fix quality that can be used to tell
+# whether SENSOR contributed to the fix.
+#
+# When this configuration item is not enabled (set to any value that is not 1),
+# GGA fix quality conforms to NMEA standard spec as below:
+# PPP/DGNSS/SBAS correction fix w/ or w/o sensor: 2
+# RTK fixed fix w/ or w/o sensor: 4
+# RTK float fix w/ or w/o sensor: 5
+# SPE fix w/ or w/o sensor: 1
+# Sensor dead reckoning fix: 6
+#
+# When this configuration is enabled (set to 1), GGA fix quality
+# will be output as below:
+# PPP fix w/o sensor: 59,                  w/ sensor: 69
+# DGNSS/SBAS correction fix w/o sensor: 2, w/ sensor: 62
+# RTK fixed fix w/o sensor: 4,             w/ sensor: 64
+# RTK float fix w/o sensor: 5,             w/ sensor: 65,
+# SPE fix w/o sensor: 1,               and w/ sensor: 61
+# Sensor dead reckoning fix: 6
+#
+# any value that is not 1 - disabled
+# 1 - enabled
+CUSTOM_NMEA_GGA_FIX_QUALITY_ENABLED = 0
+
+################################
+# NMEA Reporting Rate Config, valid only when NMEA_PROVIDER is set to "0"
+################################
+# NMEA Reporting Rate
+# Set it to "1HZ" for 1Hz NMEA Reporting
+# Set it to "NHZ" for NHz NMEA Reporting
+#Default : NHZ (overridden by position update rate if set to lower rates)
+NMEA_REPORT_RATE=NHZ
+
 # Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
 SGLTE_TARGET=0
 
@@ -159,16 +197,6 @@ AGPS_CONFIG_INJECT = 1
 # is able to acquire better timing information
 AP_TIMESTAMP_UNCERTAINTY = 10
 
-##################################################
-# QDR engine availability status
-##################################################
-# 0 : NO QDR (default)
-# 1 : QDR enabled
-# This settings enables QDR Configuration for
-# automotive use case, if enabled then
-# DR_AP_Service needs to be enabled in izat.conf
-#EXTERNAL_DR_ENABLED = 0
-
 #####################################
 # DR_SYNC Pulse Availability
 #####################################
@@ -293,7 +321,71 @@ CP_MTLR_ES=1
 ##################################################
 # 0 : Enable QTI GNSS (default)
 # 1 : Enable QCSR SS5
-# This setting use to select between QTI GNSS
-# and QCSR SS5 hardware receiver.
+# 2 : Enable PDS API
+# This setting use to select between QTI GNSS,
+# QCSR SS5 hardware receiver, and PDS API.
 # By default QTI GNSS receiver is enabled.
 # GNSS_DEPLOYMENT = 0
+
+##################################################
+## LOG BUFFER CONFIGURATION
+##################################################
+#LOG_BUFFER_ENABLED, 1=enable, 0=disable
+#*_LEVEL_TIME_DEPTH, maximum time depth of level *
+#in log buffer, unit is second
+#*_LEVEL_MAX_CAPACITY, maximum numbers of level *
+#log print sentences in log buffer
+LOG_BUFFER_ENABLED = 0
+E_LEVEL_TIME_DEPTH = 600
+E_LEVEL_MAX_CAPACITY = 50
+W_LEVEL_TIME_DEPTH = 500
+W_LEVEL_MAX_CAPACITY = 100
+I_LEVEL_TIME_DEPTH = 400
+I_LEVEL_MAX_CAPACITY = 200
+D_LEVEL_TIME_DEPTH = 30
+D_LEVEL_MAX_CAPACITY = 300
+V_LEVEL_TIME_DEPTH = 200
+V_LEVEL_MAX_CAPACITY = 400
+
+##################################################
+# Allow buffer diag log packets when diag memory allocation
+# fails during boot up time.
+##################################################
+BUFFER_DIAG_LOGGING = 1
+
+#######################################
+#  NTRIP CLIENT LIBRARY NAME
+#######################################
+# NTRIP_CLIENT_LIB_NAME =
+
+##################################################
+# Correction Data Framework settings
+# Default values:
+# CDFW_SOURCE_PRIORITY_1 = INTERNAL_1 RTCM
+# CDFW_INJECT_DATA_INTERVAL = 600000 //10 mins
+# CDFW_RTCM_MESSAGE_INTERVAL = 1000  //1 second
+#
+# If multiple sources coexist on a PL,
+# the prorioty sequence can be set by the integer number.
+# PRIORITY_1 is higher than PRIORITY_2, for example,
+# CDFW_SOURCE_PRIORITY_1 = INTERNAL_1 RTCM
+# CDFW_SOURCE_PRIORITY_2 = CV2X RTCM
+##################################################
+
+##################################################
+# RF LOSS
+# The loss in 0.1 dbHz from the C/N0 at the antenna port
+# These values must be configured by OEM if not
+# supported in QMI LOC message
+# There is one entry for each signal type
+##################################################
+RF_LOSS_GPS = 0
+RF_LOSS_GPS_L5 = 0
+RF_LOSS_GLO_LEFT = 0
+RF_LOSS_GLO_CENTER = 0
+RF_LOSS_GLO_RIGHT = 0
+RF_LOSS_BDS = 0
+RF_LOSS_BDS_B2A = 0
+RF_LOSS_GAL = 0
+RF_LOSS_GAL_E5 = 0
+RF_LOSS_NAVIC = 0