Skip to content

Installation

Jump to bottom
valadas edited this page Jul 10, 2018 · 2 revisions

Installing the Repository Module

The procedure to install the DotNetNuke Repository module is the same as installing any other module.

  • Log into your portal using an account with Host credentials.
  • Select Module Definitions from the Host menu items.

Figure 1 - Module Definitions

Select 'Upload New Module'. Depending on your container skin there will either be a pull down menu along the top, a link along the bottom, or both.

Figure 2 - Upload New Module

  • Browse to the location on your computer that you saved the DRM .zip file.
  • Click on the Add link to place the Repository install file in the Upload file box.
  • Click on the Upload New File link. This will start the DNN Private Assembly Installer process.

Figure 3 - File Upload View

The DNN Private Assembly Installer will display a list of messages to indicate success or any failures as it uploads and installs the module. If you encounter any errors during the installation process please check the Repository forum on the DNN site. It's possible that the error is already known to exist and remedies for the error will be listed. If the error does not exist then please post the error on the forum and someone will reply to you as soon as possible.

Clone this wiki locally