Change the default to Move pattern up and down and all a round when selected without using ctrl + drag.

[gtr3qq]

Useful when you have a Oopsie.
When pattern is selected, you can move it up a line or to move it to a different channel.
Famitracker and OpenMPT has it.
Pls, I can't do anther Ctl + X and Ctl + V or retype it anymore.

edit:
Scam!
I just learn that apparently you can drag but only when ctrl is pressed.
...why?
With no real beneficent insight, else other trackers would do the same.
And it really confuses me, while every other behavior translate well from other FastTracaker II based trackers.
I didn't refer back to the manual for everything else works as expected, and manual itself is...well... itself.

This really messing up my smel brain.

As such, I'd sincerely ask the possibility of changing this to default to the main stream behavior.
If anything, just to avoid confused ones like me.

[Toonlink8101]

Are you referring to changing the pattern order?

If you want to move a pattern up or down, you can do that with the up and down arrows next to the order view, just like in FamiTracker.

If you're referring to changing the pattern of one channel, you can do that with the mouse instead of the keyboard by changing the "order edit mode." If you click the last button in the order view, it will cycle between four different modes, one of which is the "click to change" mode. In this mode, you can left-click to increment the pattern value and right-click to decrement it.

If you're talking about physically moving the notes and values in a pattern, you can still use the mouse to do that, as long as it isn't going vertically. Otherwise, you can just highlight the desired selection, and click and drag where you want it to go, even between channels.

[Toonlink8101]

Although, personally, I'd recommend using the keyboard for as much as possible. Trackers as a whole were designed with keyboard use in mind, especially when in the pattern editor. Adlib Tracker II is an extreme example of this, which exclusively uses the keyboard without any mouse input.

[gtr3qq]

Nay, It's the pattern itself.
G#3 7F E57A for example.
In OpenMPT, you can highlight the notes and then drag it all directions then it will snap in place.
Fami also has it.
I'll see if I can get a GIF here or something if it's still confusing.

[gtr3qq]

https://youtube.com/shorts/27zBY8frd3U

[Toonlink8101]

I understand what you mean now.

Huh. I always thought this was a feature, but you're right; it isn't.

I guess as a copy-paste fanatic, I never noticed that this was missing

[Toonlink8101]

So, it turns out that Furnace does have this feature, but it's just slightly less intuitive by default.

In order to drag a selection like in Famitracker or OpenMPT, you have to Ctrl+click; otherwise, you will just make a new selection

[gtr3qq]

what ???
scam!

[IceDragonDee]

I don't remember where the option is, but there is a way to change it to just dragging on its own. Also you keep using the word scam as of you don't know what it means.

[gtr3qq]

err? Are we like speaking the same English now?
No offence, but if you find it hard to understand, just think it as the F word.
I feel dumb for going through these work reporting back making video for it just to learn a month later it all went in vain.
As such, I kinda want to discuss the possibility of changing it to default to the main stream behavior.
If anything, just to avoid intellectuals like me.

[IceDragonDee]

Well then you're just using it incorrectly. And if you're upset at the option being in the program, but not finding it, yes that's annoying and should probably be addressed, but it's certainly not a "scam" and it is also partly on you for not finding it. If you want to find it, go to settings > general, then scroll to the bottom. There should be an option called "allow dragging selection:" set that to "Yes"

Also, imagine using the word "intellectual" in such a way unironically.