From e808218233416283e92f37097b00e31291caed81 Mon Sep 17 00:00:00 2001 From: Klaas Schoute Date: Mon, 12 Feb 2024 05:31:27 +0100 Subject: [PATCH] Small textual change --- docs/docs/getting-started.mdx | 2 +- docs/docs/introduction.md | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/docs/getting-started.mdx b/docs/docs/getting-started.mdx index 3edc488..c2e2ca8 100644 --- a/docs/docs/getting-started.mdx +++ b/docs/docs/getting-started.mdx @@ -27,7 +27,7 @@ _Make sure this page is opened in a Chromium-based browser on a desktop. The sof - _Note_: this prevents the device from reconnecting repeatedly. 3. In the pop-up window, a new entry should appear. Select this USB serial port and click **Connect**. 4. Choose **Install Onju Voice Satellite**, then click **Install**. -5. After installation, select **Next**. +5. After installation, click **Next**. - _Note_: since the device is still in BOOT mode, you'll return to a previous pop-up window. 6. Refresh the browser page. 7. Press the `RST` button on the Onju Voice PCB and repeat steps 1 and 3 to reconnect to the device. diff --git a/docs/docs/introduction.md b/docs/docs/introduction.md index e3843d0..168c344 100644 --- a/docs/docs/introduction.md +++ b/docs/docs/introduction.md @@ -21,7 +21,7 @@ The purpose of this project is to be able to use such a modded Nest Mini as a vo - Uses the original Mini's microphone mute button to prevent the wake word engine from starting unintendedly - Automatic continuous touch control calibration -## Pre-requisites +## Prerequisites - Home Assistant 2023.11.3 or newer - A voice assistant [configured in HA](https://my.home-assistant.io/redirect/voice_assistants/) with STT and TTS in a language of your choice