| layout | title |
|---|---|
documentation |
CT30 - ZWave |
{% include base.html %}
This describes the Z-Wave device CT30, manufactured by Radio Thermostat Company of America (RTC) with the thing type UID of rtc_ct30_00_000.
The device is in the category of HVAC, defining Air condition devices, Fans.
The CT30 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
This thermostat was made by Radio Thermostat Company of America or 2Gig. It can use either WiFi or Z-Wave or both depending on
which USNAP modules are installed.
- Put your primary controller in include mode.
- Press the MENU button
- Tap the MATE button under the radio tower icon. A large "r1" or "r2" wil be displayed indicating which slot the USNAP module is in.
- Tap the MATE button under the radio tower icon again to include.
- Put your primary controller in exclude mode.
- Press the MENU button
- Tap the MATE button under the radio tower icon. A large "r1" or "r2" wil be displayed indicating which slot the USNAP module is in.
- Tap the MATE button under the radio tower icon again to exclude.
The following table summarises the channels available for the CT30 -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Sensor (temperature) | sensor_temperature | sensor_temperature | Temperature | Number:Temperature |
| Thermostat mode | thermostat_mode | thermostat_mode | Temperature | Number |
| Operating State | thermostat_state | thermostat_state | Temperature | Number |
| Setpoint (cooling) | thermostat_setpoint | thermostat_setpoint | Heating | Number:Temperature |
| Setpoint (heating) | thermostat_setpoint | thermostat_setpoint | Heating | Number:Temperature |
| Thermostat fan mode | thermostat_fanmode | thermostat_fanmode | ||
| Battery Level | battery-level | system.battery_level | Battery | Number |
| Clock Time Offset | time_offset | time_offset | Time | Number |
Indicates the current temperature.
The sensor_temperature channel is of type sensor_temperature and supports the Number:Temperature item and is in the Temperature category.
Sets the thermostat.
The thermostat_mode channel is of type thermostat_mode and supports the Number item and is in the Temperature category.
The following state translation is provided for this channel to the Number item type -:
| Value | Label |
|---|---|
| 0 | Off |
| 1 | Heat |
| 2 | Cool |
| 3 | Auto |
| 4 | Aux Heat |
| 5 | Resume |
| 6 | Fan Only |
| 7 | Furnace |
| 8 | Dry Air |
| 9 | Moist Air |
| 10 | Auto Changeover |
| 11 | Heat Economy |
| 12 | Cool Economy |
| 13 | Away |
Sets the thermostat operating state.
The thermostat_state channel is of type thermostat_state and supports the Number item and is in the Temperature category.
The following state translation is provided for this channel to the Number item type -:
| Value | Label |
|---|---|
| 0 | Idle |
| 1 | Heating |
| 2 | Cooling |
| 3 | Fan Only |
| 4 | Pending Heat |
| 5 | Pending Cool |
| 6 | Vent / Economiser |
Sets the thermostat setpoint.
The thermostat_setpoint channel is of type thermostat_setpoint and supports the Number:Temperature item and is in the Heating category.
Sets the thermostat setpoint.
The thermostat_setpoint channel is of type thermostat_setpoint and supports the Number:Temperature item and is in the Heating category.
Channel type information on this channel is not found.
Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.
The system.battery-level channel is of type system.battery-level and supports the Number item and is in the Battery category.
This channel provides the battery level as a percentage and also reflects the low battery warning state. If the battery state is in low battery warning state, this will read 0%.
Provides the current time difference for the devices time.
The time_offset channel is of type time_offset and supports the Number item and is in the Time category.
The following table provides a summary of the 6 configuration parameters available in the CT30. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 1 | Temperature Reporting Threshold | Temperature Reporting Threshold |
| 3 | Utility Lock Enable/Disable | Utility Lock Enable/Disable |
| 5 | Humidity Reporting Threshold | Humidity Reporting Threshold |
| 6 | Auxiliary/Emergency | Auxiliary/Emergency |
| 7 | Thermostat Swing Temperature | Thermostat Swing Temperature |
| 8 | Thermostat Diff Temperature | Thermostat Diff Temperature |
Temperature Reporting Threshold Sets the reporting threshold for changes in the ambient temperature as detected by the thermostat. The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Disabled |
| 1 | 0.5° |
| 2 | 1.0° |
| 3 | 1.5° |
| 4 | 2.0° |
The manufacturer defined default value is 0 (Disabled).
This parameter has the configuration ID config_1_1 and is of type INTEGER.
Utility Lock Enable/Disable The Utility Lock Configuration Set command enables or disables the utility lock. If the utility lock is enabled, the setpoint cannot be modified directly via the thermostat screen. The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Utility lock disable |
| 1 | Utility lock enable |
The manufacturer defined default value is 0 (Utility lock disable).
This parameter has the configuration ID config_3_1 and is of type INTEGER.
Humidity Reporting Threshold The Humidity Threshold Configuration Set Command sets the reporting threshold for changes in the relative humidity as detected by the thermostat. The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Disabled |
| 1 | 3% RH |
| 2 | 5% RH |
| 3 | 10%RH |
The manufacturer defined default value is 0 (Disabled).
This parameter has the configuration ID config_5_1 and is of type INTEGER.
Auxiliary/Emergency The Auxiliary/Emergency configuration command enables or disables auxiliary / emergency heating in the thermostat. Auxiliary / emergency heating is only available if the thermostat is configured in heat pump mode and with at least one stage of auxiliary heat. The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Auxiliary/Emergency heat disabled |
| 1 | Auxiliary/Emergency heat enable |
The manufacturer defined default value is 0 (Auxiliary/Emergency heat disabled).
This parameter has the configuration ID config_6_1 and is of type INTEGER.
Thermostat Swing Temperature The Thermostat Swing Temperature configuration command sets swing temperature on the thermostat. The swing temperature is applied to the setpoint to determine when the thermostat will turn on the HVAC system. If the thermostat is heating, the swing temper The following option values may be configured -:
| Value | Description |
|---|---|
| 1 | 0.05F |
| 2 | 0.1F |
| 8 | 4F |
The manufacturer defined default value is 1 (0.05F).
This parameter has the configuration ID config_7_1 and is of type INTEGER.
Thermostat Diff Temperature The Thermostat Differential Temperature configuration command sets the differential temperature for multi-stage HVAC systems. The differential temperature delta defines when the thermostat will turn on additional stages. There are two differential tempera The following option values may be configured -:
| Value | Description |
|---|---|
| 4 | 2.0 F |
| 8 | 4.0 F |
| 12 | 6.0 F |
The manufacturer defined default value is 4 (2.0 F).
This parameter has the configuration ID config_8_1 and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The device does not support associations.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SENSOR_MULTILEVEL_V2 | |
| COMMAND_CLASS_THERMOSTAT_MODE_V2 | |
| COMMAND_CLASS_THERMOSTAT_OPERATING_STATE_V1 | |
| COMMAND_CLASS_THERMOSTAT_SETPOINT_V2 | |
| COMMAND_CLASS_THERMOSTAT_FAN_MODE_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_BATTERY_V1 | |
| COMMAND_CLASS_CLOCK_V1 | |
| COMMAND_CLASS_VERSION_V1 | |
| COMMAND_CLASS_INDICATOR_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.