| layout | title |
|---|---|
documentation |
EV100 - ZWave |
{% include base.html %}
This describes the Z-Wave device EV100, manufactured by EcoNet Controls with the thing type UID of econet_ev100_00_000.
The device is in the category of HVAC, defining Air condition devices, Fans.
The EV100 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is unable to participate in the routing of data from other devices.
Specifications
- The EV100 Z-Vent requires 2x AAA batteries (not included with the unit). The batteries must be equal (both equally new or equally worn). Two new, good quality alkaline AAA batteries should last for over a year with an average use of 2 operations a day. For best results and extended operation time (over 2 years of normal use), use Lithium AAA batteries.
- The EV100 Z-Vent can be paired with, and controlled using, any Z-Wave compatible controller.
Press the SET button 3 or more times rapidly (within 1.5 seconds). This will pair the Z-Vent with your Z-Wave controller
Press the SET button 3 or more times rapidly (within 1.5 seconds). This will clear the Z-Vent’s memory of any previous pairings
The following table summarises the channels available for the EV100 -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer |
| Battery Level | battery-level | system.battery_level | Battery | Number |
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.
Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.
The system.battery-level channel is of type system.battery-level and supports the Number item and is in the Battery category.
This channel provides the battery level as a percentage and also reflects the low battery warning state. If the battery state is in low battery warning state, this will read 0%.
The device has no configuration parameters defined.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The device does not support associations.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V3 | Linked to BASIC |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_NODE_NAMING_V1 | |
| COMMAND_CLASS_BATTERY_V1 | |
| COMMAND_CLASS_VERSION_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.