nmake.opt

########################################################################
# nmake.opt - mapcache
########################################################################


#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# Uncomment the following if you are building for 64-bit windows
# (x64). You'll need to have PATH, INCLUDE and LIB set up for 64-bit
# compiles.
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#WIN64=YES

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# Check compiler version given in command line
# nmake -f makefile.vc MSVC_VER=xxxx
# 1310 = 7.1 (2003)   1400 = 8.0 (2005)
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
!IFNDEF MSVC_VER
#assume msvc 7.1
MSVC_VER=1500
!ENDIF

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# File locations and where to install things
# ----------------------------------------------------------------------
# If you are using the MapServer Build Kit, almost everything should be
# relative to this directory throughout this option file.
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

# Set the following to point to the directory adjacent to the dependent libs.
!IFNDEF MAPCACHE_BASE
MAPCACHE_BASE =  D:\build\mapserver-buildkit-2008\mapcache-git-master
#MAPCACHE_BASE =  .
!ENDIF


#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# Optmization, debug, and related compile flags.
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

!IF $(MSVC_VER) == 1400
# Optimized, with using MSVCRT.
OPTFLAGS =	/nologo /Ox /MD $(WARNING_LEVEL) $(DEBUG) /EHsc /D_CRT_SECURE_NO_DEPRECATE /D_CRT_NONSTDC_NO_DEPRECATE
# Debug with MSVCRT
#OPTFLAGS = /nologo /Zi /MD $(WARNING_LEVEL) $(DEBUG) /EHsc /D_CRT_SECURE_NO_DEPRECATE /D_CRT_NONSTDC_NO_DEPRECATE
#LDFLAGS =  /NODEFAULTLIB:msvcrt /NODEFAULTLIB:libcd /DEBUG
!ELSE
# Optimized, with using MSVCRT.
OPTFLAGS =	/nologo /Ox /MD $(WARNING_LEVEL) $(DEBUG) /EHsc
# Debug with MSVCRT
#OPTFLAGS = /nologo /Zi /MDd $(WARNING_LEVEL) $(DEBUG) /EHsc
#LDFLAGS =  /NODEFAULTLIB:msvcrt /NODEFAULTLIB:libcd /DEBUG
!ENDIF

# Set the Warning level for the compiler (defaults to W1)
WARNING_LEVEL=/W3

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# Debugging Options
# ----------------------------------------------------------------------
#NEED_NONBLOCKING_STDERR=-DNEED_NONBLOCKING_STDERR
ENABLE_STDERR_DEBUG=-DENABLE_STDERR_DEBUG

# Set the linker debug option
LDEBUG=/debug

# DEBUG Build flags
# Set the DEBUG flag if you wish to make a debug build
DEBUG=/DDEBUG

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# APR: Apache Protable Runtime library
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
APR_DIR = $(MAPCACHE_BASE)\..\apr-1.4.5
APR_ICONV_DIR = $(MAPCACHE_BASE)\..\apr-iconv-1.2.1
APR_UTIL_DIR = $(MAPCACHE_BASE)\..\apr-util-1.4.1

# APACHE HTTPD (Only required for apache module)
APACHE_DIR=$(MAPCACHE_BASE)\..\httpd-2.2.22

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# PNG support
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PNG_DIR=$(MAPCACHE_BASE)\..\libpng-1.5.10
ZLIB_DIR=$(MAPCACHE_BASE)\..\zlib-1.2.7
ZLIB_INC=-I$(ZLIB_DIR)


CURL=-DUSE_CURL
CURL_DIR=$(MAPCACHE_BASE)\..\curl-7.25.0
WINSOCK_LIB ="C:\Program Files\Microsoft SDKs\Windows\v6.1\Lib\WS2_32.Lib"


JPEG_DIR=$(MAPCACHE_BASE)\..\jpeg-8d
JPEG_INC = -I$(JPEG_DIR)

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# SQLite3 Support
# ----------------------------------------------------------------------
# Uncomment, and update accordingly.
SQLITE_DEF=-DUSE_SQLITE
SQLITE_DIR=$(MAPCACHE_BASE)\..\libspatialite-amalgamation-2.3.1

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# TIFF Support
# ----------------------------------------------------------------------
# Uncomment, and update accordingly.
TIFF_DEF=-DUSE_TIFF -DUSE_TIFF_WRITE
TIFF_DIR=$(MAPCACHE_BASE)\..\libtiff-4.0.1

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# GEOTIFF Support
# ----------------------------------------------------------------------
# Uncomment, and update accordingly.
GEOTIFF_DEF=-DUSE_GEOTIFF
GEOTIFF_DIR=$(MAPCACHE_BASE)\..\libgeotiff-svn-05232012

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# FastCGI Support
# ----------------------------------------------------------------------
# Uncomment, and update accordingly.
FCGI_DEF=-DUSE_FASTCGI
FCGI_DIR=$(MAPCACHE_BASE)\..\fcgi-2.4.0

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# GDAL/OGR Support
# ----------------------------------------------------------------------
# Uncomment, and update accordingly.
#GDAL_DEF=-DUSE_GDAL
#GDAL_DIR=$(MAPCACHE_BASE)\..\gdal-trunk

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# GEOS Support
# ----------------------------------------------------------------------
# Uncomment, and update accordingly.
#GEOS_DEF=-DUSE_GEOS
#GEOS_DIR=$(MAPCACHE_BASE)\..\geos-3.3.7

#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# Berkeley DB Support
# ----------------------------------------------------------------------
# Uncomment, and update accordingly.
BDB_DEF=-DUSE_BDB
BDB_DIR=$(MAPCACHE_BASE)\..\berkeley-db-5.3.21

########################################################################
# Section II: Mapserver Rendering Configuration
########################################################################


########################################################################
# Section VI: Support Libraries.
########################################################################
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# REGEX Libary
# ----------------------------------------------------------------------
# VC++ does not include the REGEX library... so we must provide our one.
# The following definitions will try to build GNU regex-0.12 located in the
# regex-0.12 sub-directory.
# If it was not included in the source distribution, then you can get it from:
#    ftp://ftp.gnu.org/pub/gnu/regex/regex-0.12.tar.gz
# Provide the full path to the REGEX project directory
# You do not need this library if you are compiling for PHP mapscript.
# In that case the PHP regex library will be used instead
#~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

REGEX_DIR=$(MAPCACHE_BASE)\..\regex-0.12



# Set the png support libaries
!IFDEF PNG_DIR
!IFNDEF PNG_LIB
PNG_LIB=$(PNG_DIR)\projects\visualc71\Win32_LIB_Release\libpng.lib $(ZLIB_DIR)/contrib/vstudio/vc9/x86/ZlibDllRelease/zlibwapi.lib
!ENDIF
PNG_INC=-I$(PNG_DIR)
!ENDIF

CURL_INC = -I$(CURL_DIR)/include
CURL_LIB = $(CURL_DIR)/lib/libcurl_imp.lib

!IFDEF JPEG_DIR
JPEG_LIB=$(JPEG_DIR)/libjpeg.lib
!ENDIF

!IFDEF SQLITE_DIR
SQLITE_LIB=$(SQLITE_DIR)\lib\spatialite_i.lib
SQLITE_INC=-I$(SQLITE_DIR)\include
!ENDIF

!IFDEF TIFF_DIR
TIFF_LIB=$(TIFF_DIR)\libtiff\libtiff_i.lib
TIFF_INC=-I$(TIFF_DIR)\libtiff
!ENDIF

!IFDEF GEOTIFF_DIR
GEOTIFF_LIB=$(GEOTIFF_DIR)\geotiff_i.lib
GEOTIFF_INC=-I$(GEOTIFF_DIR) -I$(GEOTIFF_DIR)\libxtiff
!ENDIF

FCGI_LIB=$(FCGI_DIR)\libfcgi\Release\libfcgi.lib
FCGI_INC=-I$(FCGI_DIR)\include

!IFDEF GDAL_DIR
GDAL_INC = -I$(GDAL_DIR)/gcore -I$(GDAL_DIR)/alg -I$(GDAL_DIR)/ogr -I$(GDAL_DIR)/port
GDAL_LIB = $(GDAL_DIR)/gdal_i.lib
!ENDIF

!IFDEF GEOS_DIR
GEOS_LIB=$(GEOS_DIR)/src/geos_c_i.lib
GEOS_INC=-I$(GEOS_DIR)/include -I$(GEOS_DIR)/capi
!ENDIF

!IFDEF BDB_DIR
BDB_LIB=$(BDB_DIR)/build_windows/Win32/Release/libdb53.lib
BDB_INC=-I$(BDB_DIR)/build_windows
!ENDIF


########################################################################
# Section VII: Variable Setup
########################################################################
# Should not need to be updated.
########################################################################
MAPCACHE_LIB =    mapcache.lib

MAPCACHE_INC= -I$(MAPCACHE_BASE)\include

#APR
APR_INC=-I$(APR_DIR)\include -I$(APR_ICONV_DIR)\include -I$(APR_UTIL_DIR)\include
#APR_LIB=$(APR_DIR)/lib/apr-1.lib $(APR_DIR)/lib/aprutil-1.lib $(APR_DIR)/lib/libapr-1.lib $(APR_DIR)/lib/libaprutil-1.lib
#APR_LIB=$(APR_DIR)/LibR/apr-1.lib $(APR_DIR)/Release/libapr-1.lib $(APR_ICONV_DIR)/LibR/apriconv-1.lib $(APR_UTIL_DIR)/LibR/aprutil-1.lib $(APR_UTIL_DIR)/Release/libaprutil-1.lib
APR_LIB=$(APR_DIR)/Release/libapr-1.lib $(APR_ICONV_DIR)/Release/libapriconv-1.lib $(APR_UTIL_DIR)/Release/libaprutil-1.lib

#APACHE
APACHE_INC=-I$(APACHE_DIR)\include
APACHE_LIB=$(APACHE_DIR)\Release\libhttpd.lib

# Setup REGEX object and includes
REGEX_OBJ=$(REGEX_DIR)\regex.obj
REGEX_INC=-I$(REGEX_DIR)

# REGEX needs some special flags... here they are for VC++ 6.0
REGEX_OPT=-DHAVE_STRING_H -DREGEX_MALLOC



#######################################################################
# Section IX: Collect compiler flags
########################################################################
# Should not need to be updated.
########################################################################

!IFNDEF EXTERNAL_LIBS
EXTERNAL_LIBS= $(PNG_LIB) $(CURL_LIB) $(JPEG_LIB) $(APR_LIB) $(APACHE_LIB) $(FRIBIDI_LIB) $(SQLITE_LIB) $(TIFF_LIB) $(GEOTIFF_LIB) $(FCGI_LIB) $(GDAL_LIB) $(GEOS_LIB) $(BDB_LIB)
!ENDIF

LIBS=$(MAPCACHE_LIB) $(EXTERNAL_LIBS)

!IFNDEF INCLUDES
INCLUDES=$(MAPCACHE_INC) $(APR_INC) $(APACHE_INC) $(REGEX_INC) $(PNG_INC) $(ZLIB_INC) $(CURL_INC) $(JPEG_INC) $(SQLITE_INC) $(TIFF_INC) $(GEOTIFF_INC) $(FCGI_INC) $(GDAL_INC) $(GEOS_INC) $(BDB_INC)
!ENDIF


MAPCACHE_DEFS =$(REGEX_OPT) $(SQLITE_DEF) $(TIFF_DEF) $(GEOTIFF_DEF) $(FCGI_DEF) $(GDAL_DEF) $(GEOS_DEF) $(BDB_DEF)



!IFDEF WIN64
MAPCACHE_CFLAGS=$(INCLUDES) $(MAPCACHE_DEFS) -DWIN32 -D_WIN32 -DUSE_GENERIC_MS_NINT
!ELSE
MAPCACHE_CFLAGS=$(INCLUDES) $(MAPCACHE_DEFS) -DWIN32 -D_WIN32
!ENDIF