-
|
What is the origin for motion region. I am seeing different manufacturers make different assumptions and I do not see it called out. I think I see axis assume lower left(quadrant 1) and Hanwha assume upper left (quandrant 4) Also issues with points x and y being float or integer. One camera tries to supply an AnaylticsEngine with a layout but that seems wrong, with spec stating Bounds element should be used. But I wanted to check if that is allowed at all. Where as a client writer, do I determine what the device is using for layout? |
Beta Was this translation helpful? Give feedback.
Replies: 2 comments
-
|
Hi! I think this question is better posted posted in spec-section https://github.com/onvif/specs/discussions to be answered by our technical team. This discussion board deals with the test specification of the ONVIF Test Tools. I hope it helps. Regards, |
Beta Was this translation helpful? Give feedback.
-
|
The motion region detector bounds refer to the coordinate system of the VideouSourceConfiguration. Section 5.2.2 of the Media2 Service Specification states: Hope this addresses your question. |
Beta Was this translation helpful? Give feedback.
The motion region detector bounds refer to the coordinate system of the VideouSourceConfiguration.
Section 5.2.2 of the Media2 Service Specification states:
Hope this addresses your question.