DVCPRO50 (avfctl captures clean, dvrescue gui does not)

[JaredGibsonAVF]

Apple M1 and M2 mini's Sonoma (12) and Ventura (13), attempt at capturing dvcpro50 tapes.

avfctl -cmd capture TEST.dv -- was successful! Produced a good looking dvcpro50 file. [DVCPRO50_avfctl_TEST.dv in google drive link.]

dvrescue device://0 -m TEST2.dv -- not successful. Did not produce a file at all. Repeated message shown below:

DVRescue v.24.07 (MediaInfoLib v.24.06) by MIPoPS
File read issue.
File read issue.03 (1.0x, DV 120)
File read issue.04 (1.0x, DV 120)
File read issue.05 (1.0x, DV 120)
File read issue.06 (1.0x, DV 120)
File read issue.07 (1.0x, DV 120)
File read issue.08 (1.0x, DV 120)
File read issue.09 (1.0x, DV 120)
File read issue.10 (1.0x, DV 120)
File read issue.11 (1.0x, DV 120)
File read issue.12 (1.0x, DV 120)
File read issue.13 (1.0x, DV 120)
File read issue.14 (1.0x, DV 120)
File read issue.15 (1.0x, DV 120)
File read issue.16 (1.0x, DV 120)
File read issue.17 (1.0x, DV 120)
File read issue.18 (1.0x, DV 120)
File read issue.19 (1.0x, DV 120)
File read issue.20 (1.0x, DV 120)
File read issue.21 (1.0x, DV 120)
[etc..... went on until hitting stop on the deck.]

dvrescue GUI (24.07 release) will capture a file but is heavily distorted (looks like macroblocking, puzzle pieces moved around.)
[DVCPRO50_DVRescueGUI_TEST.dv in google drive link.]

Samples Here:
https://drive.google.com/drive/folders/1_6Z7RZWx-7NtooWRGlKwLpCFXOUDhPXT?usp=drive_link