From 18dde2739a505ccbbc9069572b57795db37e21a6 Mon Sep 17 00:00:00 2001 From: Gerhard Lausser Date: Mon, 22 Jun 2015 20:34:37 +0200 Subject: [PATCH] scheisdreckstabelln --- README.md | 107 +++++++++++++++++++++++++++--------------------------- 1 file changed, 54 insertions(+), 53 deletions(-) diff --git a/README.md b/README.md index 9f76e248..14e5ff46 100644 --- a/README.md +++ b/README.md @@ -19,60 +19,61 @@ Command line parameters Modi ---- +| Mode | Function | |-------------------------------|------------------------------------------------------------------------| -| hardware-health | Check the status of environmental equipment (fans, temperatures, power)| -| cpu-load | Check the CPU load of the device)| -| memory-usage | Check the memory usage of the device)| -| interface-usage | Check the utilization of interfaces)| -| interface-errors | Check the error-rate of interfaces | -| interface-discards | Check the discard-rate of interfaces)| -| interface-status | Check the status of interfaces (oper/admin)| -| interface-nat-count-sessions | Count the number of nat sessions)| -| interface-nat-rejects | Count the number of nat sessions rejected due to lack of resources)| -| list-interfaces | Show the interfaces of the device and update the name cache)| -| list-interfaces-detail | Show the interfaces of the device and some details)| -| interface-availability | Show the availability (oper != up of interfaces)| -| link-aggregation-availability | Check the percentage of up interfaces in a link aggregation)| -| list-routes | Check the percentage of up interfaces in a link aggregation)| -| route-exists | Check if a route exists. --name is the dest, --name2 check also the next hop))| -| count-routes | Count the routes. --name is the dest, --name2 is the hop))| -| vpn-status | Check the status of vpns (up/down))| -| create-shinken-service | Create a Shinken service definition)| -| hsrp-state | Check the state in a HSRP group)| -| hsrp-failover | Check if a HSRP group's nodes have changed their roles| -| list-hsrp-groups | Show the HSRP groups configured on this device| -| bgp-peer-status | Check status of BGP peers| -| list-bgp-peers | Show BGP peers known to this device| -| ospf-neighbor-status | Check status of OSPF neighbors| -| list-ospf-neighbors | Show OSPF neighbors| -| ha-role | Check the role in a ha group| -| svn-status | Check the status of the svn subsystem| -| mngmt-status | Check the status of the management subsystem| -| fw-policy | Check the installed firewall policy| -| fw-connections | Check the number of firewall policy connections| -| session-usage | Check the session limits of a load balancer| -| security-status | Check if there are security-relevant incidents| -| pool-completeness | Check the members of a load balancer pool| -| pool-connections | Check the number of connections of a load balancer pool| -| pool-complections | Check the members and connections of a load balancer pool| -| list-pools | List load balancer pools| -| check-licenses | Check the installed licences/keys| -| count-users | Count the | connected) users/sessions| -| check-config | Check the status of configs (cisco, unsaved config changes)| -| check-connections | Check the quality of connections| -| count-connections | Check the number of connections (-client, -server is possible)| -| watch-fexes | Check if FEXes appear and disappear (use --lookup)| -| accesspoint-status | Check the status of access points| -| count-accesspoints | Check if the number of access points is within a certain range| -| watch-accesspoints | Check if access points appear and disappear (use --lookup)| -| list-accesspoints | List access points managed by this device| -| phone-cm-status | Check if the callmanager is up| -| phone-status | Check the number of registered/unregistered/rejected phones| -| list-smart-home-devices | List Fritz!DECT 200 plugs managed by this device| -| smart-home-device-status | Check if a Fritz!DECT 200 plug is on| -| smart-home-device-energy | Show the current power consumption of a Fritz!DECT 200 plug| -| walk | Show snmpwalk command with the oids necessary for a simulation| -| supportedmibs | Shows the names of the mibs which this devices has implemented (only lausser may run this command)| +| hardware-health | Check the status of environmental equipment (fans, temperatures, power) | +| cpu-load | Check the CPU load of the device) | +| memory-usage | Check the memory usage of the device) | +| interface-usage | Check the utilization of interfaces) | +| interface-errors | Check the error-rate of interfaces | +| interface-discards | Check the discard-rate of interfaces) | +| interface-status | Check the status of interfaces (oper/admin) | +| interface-nat-count-sessions | Count the number of nat sessions) | +| interface-nat-rejects | Count the number of nat sessions rejected due to lack of resources) | +| list-interfaces | Show the interfaces of the device and update the name cache) | +| list-interfaces-detail | Show the interfaces of the device and some details) | +| interface-availability | Show the availability (oper != up of interfaces) | +| link-aggregation-availability | Check the percentage of up interfaces in a link aggregation) | +| list-routes | Check the percentage of up interfaces in a link aggregation) | +| route-exists | Check if a route exists. --name is the dest, --name2 check also the next hop)) | +| count-routes | Count the routes. --name is the dest, --name2 is the hop)) | +| vpn-status | Check the status of vpns (up/down)) | +| create-shinken-service | Create a Shinken service definition) | +| hsrp-state | Check the state in a HSRP group) | +| hsrp-failover | Check if a HSRP group's nodes have changed their roles | +| list-hsrp-groups | Show the HSRP groups configured on this device | +| bgp-peer-status | Check status of BGP peers | +| list-bgp-peers | Show BGP peers known to this device | +| ospf-neighbor-status | Check status of OSPF neighbors | +| list-ospf-neighbors | Show OSPF neighbors | +| ha-role | Check the role in a ha group | +| svn-status | Check the status of the svn subsystem | +| mngmt-status | Check the status of the management subsystem | +| fw-policy | Check the installed firewall policy | +| fw-connections | Check the number of firewall policy connections | +| session-usage | Check the session limits of a load balancer | +| security-status | Check if there are security-relevant incidents | +| pool-completeness | Check the members of a load balancer pool | +| pool-connections | Check the number of connections of a load balancer pool | +| pool-complections | Check the members and connections of a load balancer pool | +| list-pools | List load balancer pools | +| check-licenses | Check the installed licences/keys | +| count-users | Count the | connected) users/sessions | +| check-config | Check the status of configs (cisco, unsaved config changes) | +| check-connections | Check the quality of connections | +| count-connections | Check the number of connections (-client, -server is possible) | +| watch-fexes | Check if FEXes appear and disappear (use --lookup) | +| accesspoint-status | Check the status of access points | +| count-accesspoints | Check if the number of access points is within a certain range | +| watch-accesspoints | Check if access points appear and disappear (use --lookup) | +| list-accesspoints | List access points managed by this device | +| phone-cm-status | Check if the callmanager is up | +| phone-status | Check the number of registered/unregistered/rejected phones | +| list-smart-home-devices | List Fritz!DECT 200 plugs managed by this device | +| smart-home-device-status | Check if a Fritz!DECT 200 plug is on | +| smart-home-device-energy | Show the current power consumption of a Fritz!DECT 200 plug | +| walk | Show snmpwalk command with the oids necessary for a simulation | +| supportedmibs | Shows the names of the mibs which this devices has implemented (only lausser may run this command) | The list is not complete. Some devices that are not listed here can possibly be monitored because they implement the same MIBs as supported models. Just try it .... (If a device is not recognized, i can extend the plugin. But not for free)