diff --git a/meshtastic/telemetry.proto b/meshtastic/telemetry.proto index f3ab552d..98404cf4 100644 --- a/meshtastic/telemetry.proto +++ b/meshtastic/telemetry.proto @@ -1,428 +1,428 @@ -syntax = "proto3"; - -package meshtastic; - -option csharp_namespace = "Meshtastic.Protobufs"; -option go_package = "github.com/meshtastic/go/generated"; -option java_outer_classname = "TelemetryProtos"; -option java_package = "com.geeksville.mesh"; -option swift_prefix = ""; - -/* - * Key native device metrics such as battery level - */ -message DeviceMetrics { - /* - * 0-100 (>100 means powered) - */ - uint32 battery_level = 1; - - /* - * Voltage measured - */ - float voltage = 2; - - /* - * Utilization for the current channel, including well formed TX, RX and malformed RX (aka noise). - */ - float channel_utilization = 3; - - /* - * Percent of airtime for transmission used within the last hour. - */ - float air_util_tx = 4; - - /* - * How long the device has been running since the last reboot (in seconds) - */ - uint32 uptime_seconds = 5; -} - -/* - * Weather station or other environmental metrics - */ -message EnvironmentMetrics { - /* - * Temperature measured - */ - float temperature = 1; - - /* - * Relative humidity percent measured - */ - float relative_humidity = 2; - - /* - * Barometric pressure in hPA measured - */ - float barometric_pressure = 3; - - /* - * Gas resistance in MOhm measured - */ - float gas_resistance = 4; - - /* - * Voltage measured (To be depreciated in favor of PowerMetrics in Meshtastic 3.x) - */ - float voltage = 5; - - /* - * Current measured (To be depreciated in favor of PowerMetrics in Meshtastic 3.x) - */ - float current = 6; - - /* - * relative scale IAQ value as measured by Bosch BME680 . value 0-500. - * Belongs to Air Quality but is not particle but VOC measurement. Other VOC values can also be put in here. - */ - uint32 iaq = 7; - - /* - * RCWL9620 Doppler Radar Distance Sensor, used for water level detection. Float value in mm. - */ - float distance = 8; - - /* - * VEML7700 high accuracy ambient light(Lux) digital 16-bit resolution sensor. - */ - float lux = 9; - - /* - * VEML7700 high accuracy white light(irradiance) not calibrated digital 16-bit resolution sensor. - */ - float white_lux = 10; - - /* - * Infrared lux - */ - float ir_lux = 11; - - /* - * Ultraviolet lux - */ - float uv_lux = 12; - - /* - * Wind direction in degrees - * 0 degrees = North, 90 = East, etc... - */ - uint32 wind_direction = 13; - - /* - * Wind speed in m/s - */ - float wind_speed = 14; - - /* - * Weight in KG - */ - float weight = 15; - - /* - * Wind gust in m/s - */ - float wind_gust = 16; - - /* - * Wind lull in m/s - */ - float wind_lull = 17; -} - -/* - * Power Metrics (voltage / current / etc) - */ -message PowerMetrics { - /* - * Voltage (Ch1) - */ - float ch1_voltage = 1; - - /* - * Current (Ch1) - */ - float ch1_current = 2; - - /* - * Voltage (Ch2) - */ - float ch2_voltage = 3; - - /* - * Current (Ch2) - */ - float ch2_current = 4; - - /* - * Voltage (Ch3) - */ - float ch3_voltage = 5; - - /* - * Current (Ch3) - */ - float ch3_current = 6; -} - -/* - * Air quality metrics - */ -message AirQualityMetrics { - /* - * Concentration Units Standard PM1.0 - */ - uint32 pm10_standard = 1; - - /* - * Concentration Units Standard PM2.5 - */ - uint32 pm25_standard = 2; - - /* - * Concentration Units Standard PM10.0 - */ - uint32 pm100_standard = 3; - - /* - * Concentration Units Environmental PM1.0 - */ - uint32 pm10_environmental = 4; - - /* - * Concentration Units Environmental PM2.5 - */ - uint32 pm25_environmental = 5; - - /* - * Concentration Units Environmental PM10.0 - */ - uint32 pm100_environmental = 6; - - /* - * 0.3um Particle Count - */ - uint32 particles_03um = 7; - - /* - * 0.5um Particle Count - */ - uint32 particles_05um = 8; - - /* - * 1.0um Particle Count - */ - uint32 particles_10um = 9; - - /* - * 2.5um Particle Count - */ - uint32 particles_25um = 10; - - /* - * 5.0um Particle Count - */ - uint32 particles_50um = 11; - - /* - * 10.0um Particle Count - */ - uint32 particles_100um = 12; -} - -/* - * Types of Measurements the telemetry module is equipped to handle - */ -message Telemetry { - /* - * Seconds since 1970 - or 0 for unknown/unset - */ - fixed32 time = 1; - - oneof variant { - /* - * Key native device metrics such as battery level - */ - DeviceMetrics device_metrics = 2; - - /* - * Weather station or other environmental metrics - */ - EnvironmentMetrics environment_metrics = 3; - - /* - * Air quality metrics - */ - AirQualityMetrics air_quality_metrics = 4; - - /* - * Power Metrics - */ - PowerMetrics power_metrics = 5; - } -} - -/* - * Supported I2C Sensors for telemetry in Meshtastic - */ -enum TelemetrySensorType { - /* - * No external telemetry sensor explicitly set - */ - SENSOR_UNSET = 0; - - /* - * High accuracy temperature, pressure, humidity - */ - BME280 = 1; - - /* - * High accuracy temperature, pressure, humidity, and air resistance - */ - BME680 = 2; - - /* - * Very high accuracy temperature - */ - MCP9808 = 3; - - /* - * Moderate accuracy current and voltage - */ - INA260 = 4; - - /* - * Moderate accuracy current and voltage - */ - INA219 = 5; - - /* - * High accuracy temperature and pressure - */ - BMP280 = 6; - - /* - * High accuracy temperature and humidity - */ - SHTC3 = 7; - - /* - * High accuracy pressure - */ - LPS22 = 8; - - /* - * 3-Axis magnetic sensor - */ - QMC6310 = 9; - - /* - * 6-Axis inertial measurement sensor - */ - QMI8658 = 10; - - /* - * 3-Axis magnetic sensor - */ - QMC5883L = 11; - - /* - * High accuracy temperature and humidity - */ - SHT31 = 12; - - /* - * PM2.5 air quality sensor - */ - PMSA003I = 13; - - /* - * INA3221 3 Channel Voltage / Current Sensor - */ - INA3221 = 14; - - /* - * BMP085/BMP180 High accuracy temperature and pressure (older Version of BMP280) - */ - BMP085 = 15; - - /* - * RCWL-9620 Doppler Radar Distance Sensor, used for water level detection - */ - RCWL9620 = 16; - - /* - * Sensirion High accuracy temperature and humidity - */ - SHT4X = 17; - - /* - * VEML7700 high accuracy ambient light(Lux) digital 16-bit resolution sensor. - */ - VEML7700 = 18; - - /* - * MLX90632 non-contact IR temperature sensor. - */ - MLX90632 = 19; - - /* - * TI OPT3001 Ambient Light Sensor - */ - OPT3001 = 20; - - /* - * Lite On LTR-390UV-01 UV Light Sensor - */ - LTR390UV = 21; - - /* - * AMS TSL25911FN RGB Light Sensor - */ - TSL25911FN = 22; - - /* - * AHT10 Integrated temperature and humidity sensor - */ - AHT10 = 23; - - /* - * DFRobot Lark Weather station (temperature, humidity, pressure, wind speed and direction) - */ - DFROBOT_LARK = 24; - - /* - * NAU7802 Scale Chip or compatible - */ - NAU7802 = 25; - - /* - * BMP3XX High accuracy temperature and pressure - */ - BMP3XX = 26; - - /* - * ICM-20948 9-Axis digital motion processor - */ - ICM20948 = 27; - - /* - * MAX17048 1S lipo battery sensor (voltage, state of charge, time to go) - */ - MAX17048 = 28; -} - -/* - * NAU7802 Telemetry configuration, for saving to flash - */ -message Nau7802Config { - /* - * The offset setting for the NAU7802 - */ - int32 zeroOffset = 1; - - /* - * The calibration factor for the NAU7802 - */ - float calibrationFactor = 2; -} +syntax = "proto3"; + +package meshtastic; + +option csharp_namespace = "Meshtastic.Protobufs"; +option go_package = "github.com/meshtastic/go/generated"; +option java_outer_classname = "TelemetryProtos"; +option java_package = "com.geeksville.mesh"; +option swift_prefix = ""; + +/* + * Key native device metrics such as battery level + */ +message DeviceMetrics { + /* + * 0-100 (>100 means powered) + */ + uint32 battery_level = 1; + + /* + * Voltage measured + */ + float voltage = 2; + + /* + * Utilization for the current channel, including well formed TX, RX and malformed RX (aka noise). + */ + float channel_utilization = 3; + + /* + * Percent of airtime for transmission used within the last hour. + */ + float air_util_tx = 4; + + /* + * How long the device has been running since the last reboot (in seconds) + */ + uint32 uptime_seconds = 5; +} + +/* + * Weather station or other environmental metrics + */ +message EnvironmentMetrics { + /* + * Temperature measured + */ + float temperature = 1; + + /* + * Relative humidity percent measured + */ + float relative_humidity = 2; + + /* + * Barometric pressure in hPA measured + */ + float barometric_pressure = 3; + + /* + * Gas resistance in MOhm measured + */ + float gas_resistance = 4; + + /* + * Voltage measured (To be depreciated in favor of PowerMetrics in Meshtastic 3.x) + */ + float voltage = 5; + + /* + * Current measured (To be depreciated in favor of PowerMetrics in Meshtastic 3.x) + */ + float current = 6; + + /* + * relative scale IAQ value as measured by Bosch BME680 . value 0-500. + * Belongs to Air Quality but is not particle but VOC measurement. Other VOC values can also be put in here. + */ + uint32 iaq = 7; + + /* + * RCWL9620 Doppler Radar Distance Sensor, used for water level detection. Float value in mm. + */ + float distance = 8; + + /* + * VEML7700 high accuracy ambient light(Lux) digital 16-bit resolution sensor. + */ + float lux = 9; + + /* + * VEML7700 high accuracy white light(irradiance) not calibrated digital 16-bit resolution sensor. + */ + float white_lux = 10; + + /* + * Infrared lux + */ + float ir_lux = 11; + + /* + * Ultraviolet lux + */ + float uv_lux = 12; + + /* + * Wind direction in degrees + * 0 degrees = North, 90 = East, etc... + */ + uint32 wind_direction = 13; + + /* + * Wind speed in m/s + */ + float wind_speed = 14; + + /* + * Weight in KG + */ + float weight = 15; + + /* + * Wind gust in m/s + */ + float wind_gust = 16; + + /* + * Wind lull in m/s + */ + float wind_lull = 17; +} + +/* + * Power Metrics (voltage / current / etc) + */ +message PowerMetrics { + /* + * Voltage (Ch1) + */ + float ch1_voltage = 1; + + /* + * Current (Ch1) + */ + float ch1_current = 2; + + /* + * Voltage (Ch2) + */ + float ch2_voltage = 3; + + /* + * Current (Ch2) + */ + float ch2_current = 4; + + /* + * Voltage (Ch3) + */ + float ch3_voltage = 5; + + /* + * Current (Ch3) + */ + float ch3_current = 6; +} + +/* + * Air quality metrics + */ +message AirQualityMetrics { + /* + * Concentration Units Standard PM1.0 + */ + uint32 pm10_standard = 1; + + /* + * Concentration Units Standard PM2.5 + */ + uint32 pm25_standard = 2; + + /* + * Concentration Units Standard PM10.0 + */ + uint32 pm100_standard = 3; + + /* + * Concentration Units Environmental PM1.0 + */ + uint32 pm10_environmental = 4; + + /* + * Concentration Units Environmental PM2.5 + */ + uint32 pm25_environmental = 5; + + /* + * Concentration Units Environmental PM10.0 + */ + uint32 pm100_environmental = 6; + + /* + * 0.3um Particle Count + */ + uint32 particles_03um = 7; + + /* + * 0.5um Particle Count + */ + uint32 particles_05um = 8; + + /* + * 1.0um Particle Count + */ + uint32 particles_10um = 9; + + /* + * 2.5um Particle Count + */ + uint32 particles_25um = 10; + + /* + * 5.0um Particle Count + */ + uint32 particles_50um = 11; + + /* + * 10.0um Particle Count + */ + uint32 particles_100um = 12; +} + +/* + * Types of Measurements the telemetry module is equipped to handle + */ +message Telemetry { + /* + * Seconds since 1970 - or 0 for unknown/unset + */ + fixed32 time = 1; + + oneof variant { + /* + * Key native device metrics such as battery level + */ + DeviceMetrics device_metrics = 2; + + /* + * Weather station or other environmental metrics + */ + EnvironmentMetrics environment_metrics = 3; + + /* + * Air quality metrics + */ + AirQualityMetrics air_quality_metrics = 4; + + /* + * Power Metrics + */ + PowerMetrics power_metrics = 5; + } +} + +/* + * Supported I2C Sensors for telemetry in Meshtastic + */ +enum TelemetrySensorType { + /* + * No external telemetry sensor explicitly set + */ + SENSOR_UNSET = 0; + + /* + * High accuracy temperature, pressure, humidity + */ + BME280 = 1; + + /* + * High accuracy temperature, pressure, humidity, and air resistance + */ + BME680 = 2; + + /* + * Very high accuracy temperature + */ + MCP9808 = 3; + + /* + * Moderate accuracy current and voltage + */ + INA260 = 4; + + /* + * Moderate accuracy current and voltage + */ + INA219 = 5; + + /* + * High accuracy temperature and pressure + */ + BMP280 = 6; + + /* + * High accuracy temperature and humidity + */ + SHTC3 = 7; + + /* + * High accuracy pressure + */ + LPS22 = 8; + + /* + * 3-Axis magnetic sensor + */ + QMC6310 = 9; + + /* + * 6-Axis inertial measurement sensor + */ + QMI8658 = 10; + + /* + * 3-Axis magnetic sensor + */ + QMC5883L = 11; + + /* + * High accuracy temperature and humidity + */ + SHT31 = 12; + + /* + * PM2.5 air quality sensor + */ + PMSA003I = 13; + + /* + * INA3221 3 Channel Voltage / Current Sensor + */ + INA3221 = 14; + + /* + * BMP085/BMP180 High accuracy temperature and pressure (older Version of BMP280) + */ + BMP085 = 15; + + /* + * RCWL-9620 Doppler Radar Distance Sensor, used for water level detection + */ + RCWL9620 = 16; + + /* + * Sensirion High accuracy temperature and humidity + */ + SHT4X = 17; + + /* + * VEML7700 high accuracy ambient light(Lux) digital 16-bit resolution sensor. + */ + VEML7700 = 18; + + /* + * MLX90632 non-contact IR temperature sensor. + */ + MLX90632 = 19; + + /* + * TI OPT3001 Ambient Light Sensor + */ + OPT3001 = 20; + + /* + * Lite On LTR-390UV-01 UV Light Sensor + */ + LTR390UV = 21; + + /* + * AMS TSL25911FN RGB Light Sensor + */ + TSL25911FN = 22; + + /* + * AHT10 Integrated temperature and humidity sensor + */ + AHT10 = 23; + + /* + * DFRobot Lark Weather station (temperature, humidity, pressure, wind speed and direction) + */ + DFROBOT_LARK = 24; + + /* + * NAU7802 Scale Chip or compatible + */ + NAU7802 = 25; + + /* + * BMP3XX High accuracy temperature and pressure + */ + BMP3XX = 26; + + /* + * ICM-20948 9-Axis digital motion processor + */ + ICM20948 = 27; + + /* + * MAX17048 1S lipo battery sensor (voltage, state of charge, time to go) + */ + MAX17048 = 28; +} + +/* + * NAU7802 Telemetry configuration, for saving to flash + */ +message Nau7802Config { + /* + * The offset setting for the NAU7802 + */ + int32 zeroOffset = 1; + + /* + * The calibration factor for the NAU7802 + */ + float calibrationFactor = 2; +}