Skip to content
This repository has been archived by the owner on May 31, 2023. It is now read-only.

Sketch: MQTT

Jump to bottom
mcer12 edited this page Sep 4, 2019 · 6 revisions

First run

  1. Push any of the buttons. Led indicator will start blinking and new wifi access point will appear for 5 minutes.
  2. Connect to the network with phone or PC and open URL 10.10.10.1
  3. There you will set your wifi credentials, broker credentials and topic + payload for each button. (OPTIONAL: If you use Home Assistant, just use suggested topics.)
  4. (Optional) To potentially improve performance and battery life, you can add your router's gateway IP address and also pick a static IP for your remote. You will also have to set the static IP on your router.

Home Assistant

In case you use Home Assistant built-in MQTT broker, you can push second and fourth button together until the led lights up to register the device. It will appear in Settings / Integrations / MQTT: Mosquitto broker. This assumes you have MQTT and Mosquitto correctly set up beforehand.
Use suggested topics and payloads with Home Assistant.

Clone this wiki locally