| layout | title | permalink | redirect_from | |||
|---|---|---|---|---|---|---|
page |
COMPAQ DeskPro 386 ROMs |
/devices/pc/rom/compaq/deskpro386/ |
|
The oldest COMPAQ DeskPro 386 ROM I have is a Rev J.4 ROM from a "Version 2" motherboard designed in 1987 and released in 1988.
Thanks to folks on the Vintage Computer forums, I also have a Rev N.1 ROM from 1989.
However, I'm still on the lookout for any "Version 1" motherboards from 1986, so that I can obtain dumps of COMPAQ's ROMs for their earliest 80386-based systems.
U13 (EVEN)
U15 (ODD)
Rev Even ROM # Odd ROM # Size Date
--- ---------- ---------- ---- ----
E 108285-001 108284-001
F 108328-001 108327-001
G 108328-002 108327-002
H.8 113270-008 113269-008
J.4 109592-001 109591-001 32Kb 1988-01-28 (from a 386/16 motherboard)
K.2 109592-003 109591-003 32Kb 1988-05-10 (from a 386/25 motherboard)
M.1 109592-004 109591-004
N.1 109592-005 109591-005 32Kb 1989-04-14
1988-01-28.json was created with the following FileDump command:
cd 1988-01-28
filedump --file=109592-001.hex --merge=109591-001.hex --output=1988-01-28.json
For a more human-readable dump, use the --comments option:
filedump --file=109592-001.hex --merge=109591-001.hex --output=1988-01-28.dump --comments
And for those who want a binary file, the FileDump API can be used to recreate binary data from JSON data:
http://localhost:8088/api/v1/dump?file=http://localhost:8088/devices/pc/rom/compaq/deskpro386/1988-01-28/1988-01-28.json&format=rom
Similarly, 1989-04-14.json was generated by first creating 1989-04-14.rom from the two 16Kb BIN files provided by Al Kossow:
cd 1989-04-14
filedump --file=archive/109592-005.U11.bin --merge=archive/109591-005.U13.bin --output=archive/1989-04-14.rom --format=rom
filedump --file=archive/1989-04-14.rom --output=1989-04-14.json
The .hex files for the 1988-01-28 DeskPro ROM were produced by running eeprom_read on a chipKIT Uno32 Arduino-compatible prototyping board, and capturing the serial port output on my MacBook Pro -- as outlined in "Stick a Straw in Its Brain and Suck: How to Read a ROM" by NYC Resistor contributor phooky.
The DeskPro 386 ROMs were P27128A-2 chips, so I wired my Uno32 based on this 27128A datasheet -- the closest match I could find online.
On my first dump attempt, every ROM address returned 0xFF. After looking at the 27128A datasheet more closely, I noticed the DEVICE OPERATION table indicated that, for a READ operation, /CE and /OE pins should be connected to INPUT LOW VOLTAGE, while the /PGM should be connected to INPUT HIGH VOLTAGE. So I wired pin 27 (/PGM) to +5V instead of GND, and the dump worked perfectly. The NYC Resistor article implied that every active low pin should be connected to GND, but apparently there are exceptions to that general rule.
In the current directory, an original ROM can be regenerated from the JSON-encoded file:
cd 1988-01-28
node ../../../../../../modules/filedump/bin/filedump --file=1988-01-28.json --output=1988-01-28.rom --format=rom
The ROM can then be fed into NDISASM, the disassembler included with NASM:
ndisasm -o0x8000 -se105h -se05ah -se6ffh -sf025h -sf8aah 1988-01-28.rom > 1988-01-28.asm
The -o0x8000 argument is required to "org" the file at the proper starting address, but the -s arguments
are optional; they simply establish a few sync points within the ROM image that save a little cleanup effort, by
preventing disassembly in the middle of instructions.
Next, the PCjs TextOut command, with the --nasm option, prepares the code for reassembly:
node ../../../../../../modules/textout/bin/textout --file=1988-01-28.asm --nasm > temp.asm
mv temp.asm 1988-01-28.asm
The result, 1988-01-28.asm, after a small amount of manual cleanup, can now be successfully reassembled:
nasm -f bin 1988-01-28.asm -l 1988-01-28.lst -o 1988-01-28.rom
However, it does NOT produce a binary identical to the original ROM, in part because of instruction ambiguities (ie, instructions that can be assembled multiple ways). It's possible the reassembled ROM may still work, but more research is required.
One interesting section of the COMPAQ DeskPro ROM is this string at offset 0xE002:
db 'AUTHORS CAB93GLB93RWS93DJC93NPB(C)Copyright COMPAQ Computer Corporation 1982,83,84,85,86'
which appears to list the initials of 5 authors: CAB, GLB, RWS, DJC, and NPB. The meaning of the "93" sequences is unknown; they may have simply been a form of obfuscation.