Time Calibration continuously written to Eventlog

[rete04]

Hi, I switched from the ESP32 version (Version 0.1.28) to the ESP32-S3 version (Version 2025.02.10) and I noticed that the "Time calibration" message appears very often in the Eventlog, which did not appear often in the previous version. The feeling is that the inverter is then limited in power and no longer delivers as much as it can deliver, so much so that the grid power remains very high.

if I restart the inverter, the functionality resumes correctly.

it seems as if it entered a prevention mode that does not allow the inverter to deliver more than a certain number of watts

Do you have any idea why this happens and above all if the fact that the power is limited can be linked to this message?

Thanks to everyone

[rete04]

[AndreasBoehm]

Those two things are not connected.

time calibration should not be an issue.

check this issue if you have a solar powered inverter: #1675

[rete04]

Hi and thanks for the report, I took a look at the post and I'm trying to understand something more, unfortunately in the discussion there are people who know the topic better so they take for granted concepts and configurations that escape me. Anyway I did a test and let's see if it solves the problem

Thanks

[AndreasBoehm]

Just ask your questions there and we will try to explain more if needed

[rete04]

Ok.

I realized that it is not exactly the same if I configure that ODTUoBat is connected to the solar panels or to the battery and I had configured it as connected to the solar panels even though I had a 25.6 volt 100ah battery connected. Now I have configured that it is connected to a battery and let's see how it goes.

Thanks