In this section you will find specific products, not shared on the regular CAD side. It can be bought at BRS Shop. As prototyping is time hungry and expensive, this is a mean for you to participate further in the next developments ;)
IF you dont want to change the motor bracket, (very simple installation) Good for already working machines
| Product | Status | View | Manual EN | Release date | Shop Product | Shop CAD | License |
|---|---|---|---|---|---|---|---|
| BRS-E L3VER M1 1.0 (A1.1) Tensionner module | Active |  L3VER M1 1.0 A1 Tensionner A full Vcore 3 compatible manual tensionner block removing the need of the EVA tensionner, can open the compatibility for the upcomming VZ-Bot Al/CF Toolhead set, and the next Flathead V3 iteration. NEED D5M4 Shoulder bolt |
Download | 01/06/22 | SHOP | Shop CAD |  |
| BRS-E L3VER M1 1.1 (A1.6) Tensionner module | Active |  L3VER M1 1.1 A1 Tensionner A full Vcore 3 compatible manual tensionner block removing the need of the EVA tensionner, can open the compatibility for the upcomming VZ-Bot Al/CF Toolhead set, and the next Flathead V3 iteration. NEED D5M4 Shoulder bolt, This is a revised version from the 1.0, more dense, few parts less, same performances |
Download | 01/05/23 | SHOP Soon | Shop CAD Soon | |
Rear part is meant to be printed, the front one is to be cut (metal/PC)
| Product | Status | View | Manual EN | Release date | Shop Product | CAD | License |
|---|---|---|---|---|---|---|---|
| M2 Enclosure plates 1.0 | Active |  M2 Enclosure plates A set of plates to close the rear electronic top for the M2 Lever. Has been designed with the Cpap hole but can be use with any layout you can add; Made for Vcore 3.x 200mm, 300mm, 400mm, 500mm, and 600mm |
none | 24/05/23 | soon | CAD |  |
| Product | Status | View | Manual EN | Release date | Shop Product | CAD | Credit |
|---|---|---|---|---|---|---|---|
| M2/WS7040 CPAP V0 - Enclosure plates | Deprecated |  M2/WS7040 CPAP - Enclosure plates A set of plates to close the rear electronic top for the M2 Lever. Has been designed with the Cpap hole but can be use with any layout you can add; This iteration use the excellent mod from my friend Dan Cernogorsky, named "RatRig V-Core WS7040 CPAP Fan Shelf Mount", housing the CPAP fan and electronic in a dampered solution meant to reduce the sound of the turbofan, and ease the mounting of it. Made for Vcore 3.x 200mm, 300mm, 400mm, 500mm, and 600mm |
soon | 24/05/23 | Soon | CAD | CREDIT |
| M2/WS7040 CPAP Cutted v0.3- Enclosure plates | Active | M2/WS7040 CPAP - Enclosure plates 2nd Revision to correct huge design flaw resulting a M2 misfitment |
Soon | 14/02/23 | Soon | CAD | CREDIT |
| Product | Status | View | Manual EN | Release date | Shop Product | CAD | STL | License |
|---|---|---|---|---|---|---|---|---|
| M1+refreshed Enclosure plates 1.0 | Active |  M1 Enclosure plates A set of plates to close the rear electronic top for the M1 and M1.1 refresh Lever. |
none | soon | soon | CAD | soon | |
| Product | Status | View | Manual EN | Release date | Shop Product | CAD | STL | License |
|---|---|---|---|---|---|---|---|---|
| M1+refreshed Enclosure plates 1.0 | Active | M1 Enclosure plates A set of plates to close the rear electronic top for the M1 and M1.1 refresh Lever. |
none | soon | soon | CAD | STL | |
| Product | Status | View | Manual EN | Release date | Shop Product | CAD | STL | License |
|---|---|---|---|---|---|---|---|---|
| M1+refreshed Enclosure plates 1.0 | Active | M1 Enclosure plates A set of plates to close the rear electronic top for the M1 and M1.1 refresh Lever. |
none | soon | soon | CAD | soon | |
A more drastic integration, lower profile, with an upgraded motor block design to dampen the motor vibrations and noises, and reinforced shaft for more longevity and precision.
| Product | Status | View | Manual EN | Release date | Shop Product | Shop CAD | License |
|---|---|---|---|---|---|---|---|
| BRS-E PMB 2.0 with L3VER M2 A1 Tensionner module | ACTIVE |  PMB 2.0 L3VER M2 Tensionner A full Vcore 3 compatible manual tensionner block merged with the PMB mod, removing the need of the EVA tensionner, can open the compatibility for the upcomming VZ-Bot Al/CF Toolhead set, and the next Flathead V3 iteration. NEED D5M4 Shoulder bolt |
Download | 22/06/22 | SHOP | Shop CAD | |
| BRS-E PMB 2.0 with L3VER M2 A2 Tensionner module | ACTIVE |  PMB 2.0 L3VER M2 Tensionner First revison,adding the SKL tops, adding NEMA23 compatibility holder (need to swap the electronic bay plate to the front (VC3.x) |
Download | 21/02/23 | SHOP | Shop CAD | |
IF you dont want to change the motor bracket, (very simple installation) Good for already working machines
| Product | Status | View | Release date | Shop Product | License |
|---|---|---|---|---|---|
| M1/M2 Knob | ACTIVE |  Knob M1/M2 A handy knob to adjust the tension without using a tool! Works with all L3VER M1/M2 variations |
16/10/2023 | FREE on the STORE | NONE |
IF you dont want to change the motor bracket, (very simple installation) Good for already working machines
| Product | Status | View | Manual EN | Release date | Shop Product | Shop CAD | License |
|---|---|---|---|---|---|---|---|
| BRS-IDEX A1.0 (proto designed 01/02/23) | POC |  BRS-IDEX A1.0 A full IDEX mechanism for Vcore 3.x platform, Designed to be compatible with any VCore and most of his mods like Enclosure 2.0, V1, L3ver M1, and many more, WITHOUT having to modify the FRAME |
Q1 2024 | |