pc_system.cc

/////////////////////////////////////////////////////////////////////////
// $Id: pc_system.cc 11478 2012-10-03 15:49:45Z sshwarts $
/////////////////////////////////////////////////////////////////////////
//
//  Copyright (C) 2002-2009  The Bochs Project
//
//  This library is free software; you can redistribute it and/or
//  modify it under the terms of the GNU Lesser General Public
//  License as published by the Free Software Foundation; either
//  version 2 of the License, or (at your option) any later version.
//
//  This library is distributed in the hope that it will be useful,
//  but WITHOUT ANY WARRANTY; without even the implied warranty of
//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
//  Lesser General Public License for more details.
//
//  You should have received a copy of the GNU Lesser General Public
//  License along with this library; if not, write to the Free Software
//  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
//
/////////////////////////////////////////////////////////////////////////

#include "bochs.h"
#include "cpu/cpu.h"
#include "iodev/iodev.h"
#define LOG_THIS bx_pc_system.

#if EMSCRIPTEN
#include <time.h>
#endif

#ifdef WIN32
#ifndef __MINGW32__
// #include <winsock2.h> // +++
#include <winsock.h>
#endif
#endif

#if defined(PROVIDE_M_IPS)
double     m_ips; // Millions of Instructions Per Second
#endif

// Option for turning off BX_TIMER_DEBUG?
// Check out m_ips and ips

#define SpewPeriodicTimerInfo 0
#define MinAllowableTimerPeriod 1

const Bit64u bx_pc_system_c::NullTimerInterval = 0xffffffff;

  // constructor
bx_pc_system_c::bx_pc_system_c()
{
  this->put("pc_system", "SYS");

  BX_ASSERT(numTimers == 0);

  // Timer[0] is the null timer.  It is initialized as a special
  // case here.  It should never be turned off or modified, and its
  // duration should always remain the same.
  ticksTotal = 0; // Reset ticks since emulator started.
  timer[0].inUse      = 1;
  timer[0].period     = NullTimerInterval;
  timer[0].active     = 1;
  timer[0].continuous = 1;
  timer[0].funct      = nullTimer;
  timer[0].this_ptr   = this;
  numTimers = 1; // So far, only the nullTimer.
}

void bx_pc_system_c::initialize(Bit32u ips)
{
  ticksTotal = 0;
  timer[0].timeToFire = NullTimerInterval;
  currCountdown       = NullTimerInterval;
  currCountdownPeriod = NullTimerInterval;
  lastTimeUsec = 0;
  usecSinceLast = 0;
  triggeredTimer = 0;
  HRQ = 0;
  kill_bochs_request = 0;

  // parameter 'ips' is the processor speed in Instructions-Per-Second
  m_ips = ((double)ips) / 1000000.0;
  BX_DEBUG(("system - initialize, ips %lu, m_ips %f", ips, m_ips));
  BX_DEBUG(("currCountdown: %u", currCountdown));

  BX_DEBUG(("ips = %u", (unsigned) ips));
}

void bx_pc_system_c::set_HRQ(bx_bool val)
{
  HRQ = val;
  if (val)
    BX_CPU(0)->async_event = 1;
}

void bx_pc_system_c::raise_INTR(void)
{
  if (bx_dbg.interrupts)
    BX_INFO(("pc_system: Setting INTR=1 on bootstrap processor %d", BX_BOOTSTRAP_PROCESSOR));

  BX_CPU(BX_BOOTSTRAP_PROCESSOR)->raise_INTR();
}

void bx_pc_system_c::clear_INTR(void)
{
  if (bx_dbg.interrupts)
    BX_INFO(("pc_system: Setting INTR=0 on bootstrap processor %d", BX_BOOTSTRAP_PROCESSOR));

  BX_CPU(BX_BOOTSTRAP_PROCESSOR)->clear_INTR();
}

//
// Read from the IO memory address space
//

  Bit32u BX_CPP_AttrRegparmN(2)
bx_pc_system_c::inp(Bit16u addr, unsigned io_len)
{
  Bit32u ret = bx_devices.inp(addr, io_len);
  return ret;
}

//
// Write to the IO memory address space.
//

  void BX_CPP_AttrRegparmN(3)
bx_pc_system_c::outp(Bit16u addr, Bit32u value, unsigned io_len)
{
  bx_devices.outp(addr, value, io_len);
}

void bx_pc_system_c::set_enable_a20(bx_bool value)
{
#if BX_SUPPORT_A20
  bx_bool old_enable_a20 = enable_a20;

  if (value) {
    enable_a20 = 1;
#if BX_CPU_LEVEL < 2
    a20_mask =    0xfffff;
#elif BX_CPU_LEVEL == 2
    a20_mask =   0xffffff;
#elif BX_PHY_ADDRESS_LONG
    a20_mask = BX_CONST64(0xffffffffffffffff);
#else  /* 386+ */
    a20_mask = 0xffffffff;
#endif
  }
  else {
    enable_a20 = 0;
    /* mask off A20 address line */
#if BX_PHY_ADDRESS_LONG
    a20_mask = BX_CONST64(0xffffffffffefffff);
#else
    a20_mask = 0xffefffff;
#endif
  }

  BX_DBG_A20_REPORT(enable_a20);

  BX_DEBUG(("A20: set() = %u", (unsigned) enable_a20));

  // If there has been a transition, we need to notify the CPUs so
  // they can potentially invalidate certain cache info based on
  // A20-line-applied physical addresses.
  if (old_enable_a20 != enable_a20) MemoryMappingChanged();
#else
  BX_DEBUG(("set_enable_a20: ignoring: BX_SUPPORT_A20 = 0"));
#endif
}

bx_bool bx_pc_system_c::get_enable_a20(void)
{
#if BX_SUPPORT_A20
  BX_DEBUG(("A20: get() = %u", (unsigned) enable_a20));

  return enable_a20;
#else
  BX_DEBUG(("get_enable_a20: ignoring: BX_SUPPORT_A20 = 0"));
  return 1;
#endif
}

void bx_pc_system_c::MemoryMappingChanged(void)
{
  for (unsigned i=0; i<BX_SMP_PROCESSORS; i++)
    BX_CPU(i)->TLB_flush();
}

void bx_pc_system_c::invlpg(bx_address addr)
{
  for (unsigned i=0; i<BX_SMP_PROCESSORS; i++)
    BX_CPU(i)->TLB_invlpg(addr);
}

int bx_pc_system_c::Reset(unsigned type)
{
  // type is BX_RESET_HARDWARE or BX_RESET_SOFTWARE
  BX_INFO(("bx_pc_system_c::Reset(%s) called",type==BX_RESET_HARDWARE?"HARDWARE":"SOFTWARE"));

  set_enable_a20(1);

  // Always reset cpu
  for (int i=0; i<BX_SMP_PROCESSORS; i++) {
    BX_CPU(i)->reset(type);
  }

  // Reset devices only on Hardware resets
  if (type==BX_RESET_HARDWARE) {
    DEV_reset_devices(type);
  }

  return(0);
}

Bit8u bx_pc_system_c::IAC(void)
{
  return DEV_pic_iac();
}

void bx_pc_system_c::exit(void)
{
  // delete all registered timers (exception: null timer and APIC timer)
  numTimers = 1 + BX_SUPPORT_APIC;
  bx_devices.exit();
  if (bx_gui) {
    bx_gui->cleanup();
    bx_gui->exit();
  }
}

void bx_pc_system_c::register_state(void)
{
  bx_list_c *list = new bx_list_c(SIM->get_bochs_root(), "pc_system", "PC System State");
  BXRS_PARAM_BOOL(list, enable_a20, enable_a20);
  BXRS_HEX_PARAM_SIMPLE(list, a20_mask);
  BXRS_DEC_PARAM_SIMPLE(list, currCountdown);
  BXRS_DEC_PARAM_SIMPLE(list, currCountdownPeriod);
  BXRS_DEC_PARAM_SIMPLE(list, ticksTotal);
  BXRS_DEC_PARAM_SIMPLE(list, lastTimeUsec);
  BXRS_DEC_PARAM_SIMPLE(list, usecSinceLast);
  BXRS_PARAM_BOOL(list, HRQ, HRQ);

  bx_list_c *timers = new bx_list_c(list, "timer");
  for (unsigned i = 0; i < numTimers; i++) {
    char name[4];
    sprintf(name, "%d", i);
    bx_list_c *bxtimer = new bx_list_c(timers, name);
    BXRS_PARAM_BOOL(bxtimer, inUse, timer[i].inUse);
    BXRS_DEC_PARAM_FIELD(bxtimer, period, timer[i].period);
    BXRS_DEC_PARAM_FIELD(bxtimer, timeToFire, timer[i].timeToFire);
    BXRS_PARAM_BOOL(bxtimer, active, timer[i].active);
    BXRS_PARAM_BOOL(bxtimer, continuous, timer[i].continuous);
  }
}

// ================================================
// Bochs internal timer delivery framework features
// ================================================

int bx_pc_system_c::register_timer(void *this_ptr, void (*funct)(void *),
  Bit32u useconds, bx_bool continuous, bx_bool active, const char *id)
{
  // Convert useconds to number of ticks.
  Bit64u ticks = (Bit64u) (((double)useconds) * m_ips);
  BX_DEBUG(("register_timer - useconds %lu, ticks %llu, m_ips %f", useconds, ticks, m_ips));

  return register_timer_ticks(this_ptr, funct, ticks, continuous, active, id);
}

int bx_pc_system_c::register_timer_ticks(void* this_ptr, bx_timer_handler_t funct,
    Bit64u ticks, bx_bool continuous, bx_bool active, const char *id)
{
  unsigned i;
  
  BX_DEBUG(("register_timer_ticks - ticks %llu, ", ticks));

  // If the timer frequency is rediculously low, make it more sane.
  // This happens when 'ips' is too low.
  if (ticks < MinAllowableTimerPeriod) {
    //BX_INFO(("register_timer_ticks: adjusting ticks of %llu to min of %u",
    //          ticks, MinAllowableTimerPeriod));
    ticks = MinAllowableTimerPeriod;
  }

  // search for new timer for i=1, i=0 is reserved for NullTimer
  for (i=1; i < numTimers; i++) {
    if (timer[i].inUse == 0)
      break;
  }

#if BX_TIMER_DEBUG
  if (i==0)
    BX_PANIC(("register_timer: cannot register NullTimer again!"));
  if (numTimers >= BX_MAX_TIMERS)
    BX_PANIC(("register_timer: too many registered timers"));
  if (this_ptr == NULL)
    BX_PANIC(("register_timer_ticks: this_ptr is NULL!"));
  if (funct == NULL)
    BX_PANIC(("register_timer_ticks: funct is NULL!"));
#endif

  timer[i].inUse      = 1;
  timer[i].period     = ticks;
  timer[i].timeToFire = (ticksTotal + Bit64u(currCountdownPeriod-currCountdown)) + ticks;
  timer[i].active     = active;
  timer[i].continuous = continuous;
  timer[i].funct      = funct;
  timer[i].this_ptr   = this_ptr;
  strncpy(timer[i].id, id, BxMaxTimerIDLen);
  timer[i].id[BxMaxTimerIDLen-1] = 0; // Null terminate if not already.

  if (active) {
    if (ticks < Bit64u(currCountdown)) {
      // This new timer needs to fire before the current countdown.
      // Skew the current countdown and countdown period to be smaller
      // by the delta.
      currCountdownPeriod -= (currCountdown - Bit32u(ticks));
      currCountdown = Bit32u(ticks);
       BX_DEBUG(("adjusting countdown (%u)", currCountdown));
    }
  }

  BX_DEBUG(("active %d, ticks %u, currCountdown %llu", active, ticks, Bit64u(currCountdown)));
  BX_DEBUG(("timer id %d registered for '%s'", i, id));
  // If we didn't find a free slot, increment the bound, numTimers.
  if (i==numTimers)
    numTimers++; // One new timer installed.

  // Return timer id.
  return(i);
}

void bx_pc_system_c::countdownEvent(void)
{
  unsigned i;
  Bit64u   minTimeToFire;
  bx_bool  triggered[BX_MAX_TIMERS];


#if BX_SHOW_IPS
#if EMSCRIPTEN // emscripten does not display IPS because of lacking "select" support ;(
  static Bit64u lastTicks = time_ticks();
  static clock_t lastTime = clock() / (CLOCKS_PER_SEC / 1000);

  Bit64u ticks = time_ticks();
  if (ticks >= lastTicks + 1000000)
  {
    // amount of system ticks passed from last time the handler was called
    clock_t nowTime = clock() / (CLOCKS_PER_SEC / 1000);
    clock_t deltaTime = nowTime - lastTime;
    Bit64u ips_count = ticks - lastTicks;
    printf("ips: %fM\n", (double)ips_count / (double)deltaTime / 1000);
    lastTime = nowTime;
    lastTicks = ticks;
  }
#endif
#endif

  // The countdown decremented to 0.  We need to service all the active
  // timers, and invoke callbacks from those timers which have fired.
#if BX_TIMER_DEBUG
  if (currCountdown != 0)
    BX_PANIC(("countdownEvent: ticks!=0"));
#endif

  // Increment global ticks counter by number of ticks which have
  // elapsed since the last update.
  ticksTotal += Bit64u(currCountdownPeriod);
  minTimeToFire = (Bit64u) -1;
  
  BX_DEBUG(("countdownEvent (%llu)", ticksTotal));

  for (i=0; i < numTimers; i++) {
    triggered[i] = 0; // Reset triggered flag.
    if (timer[i].active) {
#if BX_TIMER_DEBUG
      if (ticksTotal > timer[i].timeToFire)
        BX_PANIC(("countdownEvent: ticksTotal > timeToFire[%u], D " FMT_LL "u", i,
                  timer[i].timeToFire-ticksTotal));
#endif
      if (ticksTotal == timer[i].timeToFire) {
        // This timer is ready to fire.
        triggered[i] = 1;

        if (timer[i].continuous==0) {
          // If triggered timer is one-shot, deactive.
          timer[i].active = 0;
        }
        else {
          // Continuous timer, increment time-to-fire by period.
          timer[i].timeToFire += timer[i].period;
          if (timer[i].timeToFire < minTimeToFire)
            minTimeToFire = timer[i].timeToFire;
        }
      }
      else {
        // This timer is not ready to fire yet.
        if (timer[i].timeToFire < minTimeToFire)
          minTimeToFire = timer[i].timeToFire;
      }
    }
  }

  // Calculate next countdown period.  We need to do this before calling
  // any of the callbacks, as they may call timer features, which need
  // to be advanced to the next countdown cycle.
  currCountdown = currCountdownPeriod =
      Bit32u(minTimeToFire - ticksTotal);

  for (i=0; i < numTimers; i++) {
    // Call requested timer function.  It may request a different
    // timer period or deactivate etc.
    if (triggered[i]) {
      triggeredTimer = i;
      BX_DEBUG(("timer %d triggered (%s)", i, timer[i].id));
      timer[i].funct(timer[i].this_ptr);
      triggeredTimer = 0;
    }
  }
}

void bx_pc_system_c::nullTimer(void* this_ptr)
{
  // This function is always inserted in timer[0].  It is sort of
  // a heartbeat timer.  It ensures that at least one timer is
  // always active to make the timer logic more simple, and has
  // a duration of less than the maximum 32-bit integer, so that
  // a 32-bit size can be used for the hot countdown timer.  The
  // rest of the timer info can be 64-bits.  This is also a good
  // place for some logic to report actual emulated
  // instructions-per-second (IPS) data when measured relative to
  // the host computer's wall clock.

  UNUSED(this_ptr);

  BX_DEBUG(("nullTimer"));
#if SpewPeriodicTimerInfo
  BX_INFO(("==================================="));
  for (unsigned i=0; i < bx_pc_system.numTimers; i++) {
    if (bx_pc_system.timer[i].active) {
      BX_INFO(("BxTimer(%s): period=" FMT_LL "u, continuous=%u",
               bx_pc_system.timer[i].id, bx_pc_system.timer[i].period,
               bx_pc_system.timer[i].continuous));
    }
  }
#endif
}

void bx_pc_system_c::benchmarkTimer(void* this_ptr)
{
  bx_pc_system_c *class_ptr = (bx_pc_system_c *) this_ptr;
  class_ptr->kill_bochs_request = 1;
  bx_user_quit = 1;
}

#if BX_DEBUGGER
void bx_pc_system_c::timebp_handler(void* this_ptr)
{
   BX_CPU(0)->break_point = BREAK_POINT_TIME;
   BX_DEBUG(("Time breakpoint triggered"));

   if (timebp_queue_size > 1) {
     Bit64s new_diff = timebp_queue[1] - bx_pc_system.time_ticks();
     bx_pc_system.activate_timer_ticks(timebp_timer, new_diff, 0);
   }
   timebp_queue_size--;
   for (int i = 0; i < timebp_queue_size; i++)
     timebp_queue[i] = timebp_queue[i+1];
}
#endif // BX_DEBUGGER

Bit64u bx_pc_system_c::time_usec_sequential()
{
   Bit64u this_time_usec = time_usec();
   if(this_time_usec != lastTimeUsec) {
      Bit64u diff_usec = this_time_usec-lastTimeUsec;
      lastTimeUsec = this_time_usec;
      if(diff_usec >= usecSinceLast) {
	usecSinceLast = 0;
      } else {
	usecSinceLast -= diff_usec;
      }
   }
   usecSinceLast++;
   return (this_time_usec+usecSinceLast);
}

Bit64u bx_pc_system_c::time_usec()
{
  return (Bit64u) (((double)(Bit64s)time_ticks()) / m_ips);
}

void bx_pc_system_c::start_timers(void) { }

void bx_pc_system_c::activate_timer_ticks(unsigned i, Bit64u ticks, bx_bool continuous)
{
#if BX_TIMER_DEBUG
  if (i >= numTimers)
    BX_PANIC(("activate_timer_ticks: timer %u OOB", i));
  if (i == 0)
    BX_PANIC(("activate_timer_ticks: timer 0 is the NullTimer!"));
  if (timer[i].period < MinAllowableTimerPeriod)
    BX_PANIC(("activate_timer_ticks: timer[%u].period of " FMT_LL "u < min of %u",
              i, timer[i].period, MinAllowableTimerPeriod));
#endif

  // If the timer frequency is rediculously low, make it more sane.
  // This happens when 'ips' is too low.
  if (ticks < MinAllowableTimerPeriod) {
    //BX_INFO(("activate_timer_ticks: adjusting ticks of %llu to min of %u",
    //          ticks, MinAllowableTimerPeriod));
    ticks = MinAllowableTimerPeriod;
  }

  timer[i].period = ticks;
  timer[i].timeToFire = (ticksTotal + Bit64u(currCountdownPeriod-currCountdown)) + ticks;
  timer[i].active     = 1;
  timer[i].continuous = continuous;

  if (ticks < Bit64u(currCountdown)) {
    // This new timer needs to fire before the current countdown.
    // Skew the current countdown and countdown period to be smaller
    // by the delta.
    currCountdownPeriod -= (currCountdown - Bit32u(ticks));
    currCountdown = Bit32u(ticks);
  }
}

void bx_pc_system_c::activate_timer(unsigned i, Bit32u useconds, bx_bool continuous)
{
  Bit64u ticks;

#if BX_TIMER_DEBUG
  if (i >= numTimers)
    BX_PANIC(("activate_timer: timer %u OOB", i));
  if (i == 0)
    BX_PANIC(("activate_timer: timer 0 is the nullTimer!"));
#endif

  // if useconds = 0, use default stored in period field
  // else set new period from useconds
  if (useconds==0) {
    ticks = timer[i].period;
  }
  else {
    // convert useconds to number of ticks
    ticks = (Bit64u) (((double)useconds) * m_ips);

    // If the timer frequency is rediculously low, make it more sane.
    // This happens when 'ips' is too low.
    if (ticks < MinAllowableTimerPeriod) {
      //BX_INFO(("activate_timer: adjusting ticks of %llu to min of %u",
      //          ticks, MinAllowableTimerPeriod));
      ticks = MinAllowableTimerPeriod;
    }

    timer[i].period = ticks;
  }

  activate_timer_ticks(i, ticks, continuous);
}

void bx_pc_system_c::deactivate_timer(unsigned i)
{
#if BX_TIMER_DEBUG
  if (i >= numTimers)
    BX_PANIC(("deactivate_timer: timer %u OOB", i));
  if (i == 0)
    BX_PANIC(("deactivate_timer: timer 0 is the nullTimer!"));
#endif

  timer[i].active = 0;
}

bx_bool bx_pc_system_c::unregisterTimer(unsigned timerIndex)
{
#if BX_TIMER_DEBUG
  if (timerIndex >= numTimers)
    BX_PANIC(("unregisterTimer: timer %u OOB", timerIndex));
  if (timerIndex == 0)
    BX_PANIC(("unregisterTimer: timer 0 is the nullTimer!"));
  if (timer[timerIndex].inUse == 0)
    BX_PANIC(("unregisterTimer: timer %u is not in-use!", timerIndex));
#endif

  if (timer[timerIndex].active) {
    BX_PANIC(("unregisterTimer: timer '%s' is still active!", timer[timerIndex].id));
    return(0); // Fail.
  }

  // Reset timer fields for good measure.
  timer[timerIndex].inUse      = 0; // No longer registered.
  timer[timerIndex].period     = BX_MAX_BIT64S; // Max value (invalid)
  timer[timerIndex].timeToFire = BX_MAX_BIT64S; // Max value (invalid)
  timer[timerIndex].continuous = 0;
  timer[timerIndex].funct      = NULL;
  timer[timerIndex].this_ptr   = NULL;
  memset(timer[timerIndex].id, 0, BxMaxTimerIDLen);

  if (timerIndex == (numTimers-1)) numTimers--;

  return(1); // OK
}