readme.md

lowprokb.ca/corneish-zen

A premium split keyboard, based on the Corne

Tenting Base

• The tenting base can be built using the items bellow:
  • 2x 3D printed frames.
  • 2x 45x65mm magnetic stickers.
  • 4x 45x65mm metal plates.
    • 2 of them must be superglued to the back of the Zen (a single drop in the center of the metal plate, to make it possible to remove if necessary).
    • 2 of them must be glued to the adhesive side of the magnet, to give it stability (the built in adhesive is enough).
  • 4x Nillkin laptop stands.
  • More details can be found here.

ZMK

Compile

• Run the script build_zen.

Flash

• Connect the left half, put it in bootloader mode and copy the file build/artifacts/corneish_zen_v2_left-zmk.uf2 to the drive CORNEISHZEN. Wait for the drive to be disconnected.
• Connect the right half, put it in bootloader mode and copy the file build/artifacts/corneish_zen_v2_right-zmk.uf2 to the drive CORNEISHZEN. Wait for the drive to be disconnected.

Keymap

• The list of supported features in this keymap can be found here.

Resources

• Home
• ZMK Docs
• Keyboard Tester